wlsxPsePortCurrent
WLSX-POE-MIB ·
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14
Object
This object indicates the current on this port.
Context
- MIB
- WLSX-POE-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Units
- milliAmps
- Parent
- wlsxPsePortEntry
- Table
- wlsxPsePortTable
- Siblings
- 13
Syntax
milliAmps SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsxPsePortIndex This variable uniquely identifies the power
ethernet port for which this entry
is populated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1 |
| wlsxPsePortDefaultPowerMax This object indicates the default maximum power available
on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10 |
| wlsxPsePortPowerAllocated This object indicates the configured power allocation
on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11 |
| wlsxPsePortPowerConsumed This object gives the power consumption by the PD on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12 |
| wlsxPsePortVoltage This object indicates the voltage on this port. | column | milliVolts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13 |
| wlsxPsePortAdminStatus Admin status of a power ethernet port.
A value of enable(1) means that the port
has PSE functions enabled on it.
A value of disable(2) means that the… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2 |
| wlsxPsePortState This object indicates the status of the port.
The reason for these states is indicated by wlsxPsePortStatus.
on(1) - indicates that PSE is sourcing power.
off(2) -… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3 |
| wlsxPsePortStatus This object indicates the status of the port.
unknown(1) - indicates either a state of off with the
reason being not known or t… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 |
| wlsxPsePortDiscoveryMode This object indicates the method of discovery used
by the system for the detection of the Powered Device(PD).
A value of unknown(0) means that the discovery method… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 |
| wlsxPsePortIsPdDetected This object indicates if a Powered Device(PD) is
detected on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6 |
| wlsxPsePortIsIeeePd This object indicates the IEEE compliance of a
Powered Device(PD).
A value of true(1) means the Powered Device(PD)
is IEEE compliant.
A value of fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7 |
| wlsxPsePortPdClass This object indicates the Power classification of the
Powered Device(PD) connected on the port.
A value of 'class0(1)' indicates that the power
classification of … | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8 |
| wlsxPsePortPriority This object indicates the configured priority for this port.
low(1) - indicates the priority of the port is low.
high(2) - indicates the priority of the po… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9 |