xdsl2SCStatusSegmentLinReal
VDSL2-LINE-MIB ·
.1.3.6.1.2.1.10.251.1.2.5.1.2
Object
column
OctetString
An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) subcarrier groups and can be retrieved in a single segment. The number of utilized values in the downstream direction depends on NSds; in the upstream direction, it depends on NSus. This value is referred to here as NS. Each array entry represents the real component (referred to here as a(i)) of Hlin(f = i*Df) value for a particular subcarrier group index i (0 <= i <= NS). Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)), where scale is xdsl2SCStatusLinScale and a(i) and b(i) (provided by the xdsl2SCStatusSegmentLinImg object) are in the range (-2^15+1) to (+2^15-1). A special value a(i)=b(i)= -2^15 indicates that no measurement could be done for the subcarrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure. Each value in this array is 16 bits wide and is stored in big endian format.
Context
- MIB
- VDSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.251.1.2.5.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- xdsl2SCStatusSegmentEntry
- Table
- xdsl2SCStatusSegmentTable
- Siblings
- 7
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-1024
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xdsl2SCStatusSegment The segment of the subcarriers status information provided by
this row.
Several status parameters in this table are retrieved in segments.
The first segment of the status informat… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.5.1.1 |
| xdsl2SCStatusSegmentLinImg An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission direction.
It is designed to support up to 512 (downstream) subcarr… | column | OctetString | .1.3.6.1.2.1.10.251.1.2.5.1.3 |
| xdsl2SCStatusSegmentLog An array of up to 512 real H(f) logarithmic representation
values in dB for the respective transmission direction. It is
designed to support up to 512 (downstream) subcarrier gro… | column | dB OctetString | .1.3.6.1.2.1.10.251.1.2.5.1.4 |
| xdsl2SCStatusSegmentQln An array of up to 512 real Quiet Line Noise values in dBm/Hz
for the respective transmission direction. It is designed for up
to 512 (downstream) subcarrier groups and can be ret… | column | dBm/Hz OctetString | .1.3.6.1.2.1.10.251.1.2.5.1.5 |
| xdsl2SCStatusSegmentSnr The SNR Margin per subcarrier group, expressing the ratio
between the received signal power and received noise power per
subscriber group. It is an array of 512 octets, designed … | column | 0.5 dB OctetString | .1.3.6.1.2.1.10.251.1.2.5.1.6 |
| xdsl2SCStatusSegmentBitsAlloc The bits allocation per subcarrier. An array of 256 octets
(512 nibbles) designed for supporting up to 512 (downstream)
subcarriers. When more than 512 subcarrier… | column | bits VDSL2-LINE-TC-MIBXdsl2BitsAlloc | .1.3.6.1.2.1.10.251.1.2.5.1.7 |
| xdsl2SCStatusSegmentGainAlloc The gain allocation per subcarrier. An array of 512 16-bit
values, designed for supporting up to 512 (downstream)
subcarriers. When more then 512 subcarriers are supported, the
… | column | OctetString | .1.3.6.1.2.1.10.251.1.2.5.1.8 |