xdsl2SCStatusQlnMt
VDSL2-LINE-MIB ·
.1.3.6.1.2.1.10.251.1.2.3.1.6
Object
column
Unsigned32
This parameter contains the number of symbols used to measure the QLN(f) values. It is an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the QLN(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation G.992.3).
Context
- MIB
- VDSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.251.1.2.3.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- xdsl2SCStatusEntry
- Table
- xdsl2SCStatusTable
- Siblings
- 10
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xdsl2SCStatusDirection The direction of the subcarrier either
upstream or downstream. | column | VDSL2-LINE-TC-MIBXdsl2Direction | .1.3.6.1.2.1.10.251.1.2.3.1.1 |
| xdsl2SCStatusAttainableRate Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the xTU-C transmitter and xTU-R receiver
(when referring to downstream direction) or by the xTU-R
… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.10 |
| xdsl2SCStatusRowStatus Row Status. The SNMP agent will create a row in this table
for storing the results of a DELT performed on the associated
line, if the row does not already exist.
W… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.251.1.2.3.1.11 |
| xdsl2SCStatusLinScale The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic
procedu… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.2 |
| xdsl2SCStatusLinScGroupSize Number of subcarriers per group used to report the H(f)
linear representation values for the respective transmission
direction. The valid values are 1, 2, 4, and 8. For ADSL, th… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.3 |
| xdsl2SCStatusLogMt This parameter contains the number of symbols used to
measure the Hlog(f) values. It is represented as an unsigned
integer in the range from 1 to 2^16-1.
After a loop diagnostic … | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.4 |
| xdsl2SCStatusLogScGroupSize Number of subcarriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4, and 8.
For ADSL… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.5 |
| xdsl2SCStatusQlnScGroupSize Number of subcarriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4, and 8.
For ADSL, this parameter… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.7 |
| xdsl2SCStatusSnrMtime This parameter contains the number of symbols used to measure
the SNR(f) values. It is an unsigned integer in the range from 1
to 2^16-1. After a loop diagnostic procedure, this… | column | symbols Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.8 |
| xdsl2SCStatusSnrScGroupSize Number of subcarriers per group used to report the SNR values
on the respective transmission direction.
The valid values are 1, 2, 4, and 8.
For ADSL, this parameter is equal to 1… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.3.1.9 |