xdsl2ChConfProfMinDataRateDs
VDSL2-LINE-MIB ·
.1.3.6.1.2.1.10.251.1.5.2.1.1.2
Object
Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s.
Context
- MIB
- VDSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.251.1.5.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bits/second
- Parent
- xdsl2ChConfProfileEntry
- Table
- xdsl2ChConfProfileTable
- Siblings
- 24
Syntax
bits/second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xdsl2ChConfProfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.2.1.10.251.1.5.2.1.1.1 |
| xdsl2ChConfProfMaxDelayDs Maximum Interleave Delay on Downstream direction. The
maximum one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor) a… | column | milliseconds Unsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.10 |
| xdsl2ChConfProfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on Upstream
direction. The xTUs shall choose the S (factor) and D… | column | milliseconds Unsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.11 |
| xdsl2ChConfProfMinProtectionDs This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 4.3125 kHz. The impulse
no… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.2.1.10.251.1.5.2.1.1.12 |
| xdsl2ChConfProfMinProtectionUs This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 4.3125 kHz. The impulse
no… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.2.1.10.251.1.5.2.1.1.13 |
| xdsl2ChConfProfMinProtection8Ds This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 8.625 kHz. The impulse
noi… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.2.1.10.251.1.5.2.1.1.14 |
| xdsl2ChConfProfMinProtection8Us This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 8.625 kHz. The impulse
noi… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.2.1.10.251.1.5.2.1.1.15 |
| xdsl2ChConfProfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The
maximum bit error ratio for the bearer channel. | column | VDSL2-LINE-TC-MIBXdsl2MaxBer | .1.3.6.1.2.1.10.251.1.5.2.1.1.16 |
| xdsl2ChConfProfMaxBerUs Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. | column | VDSL2-LINE-TC-MIBXdsl2MaxBer | .1.3.6.1.2.1.10.251.1.5.2.1.1.17 |
| xdsl2ChConfProfUsDataRateDs Data Rate Threshold Upshift for Downstream direction. An
'Up-Shift rate change' event is triggered when the
actual downstream data rate exceeds, by more than the threshold,
the d… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.18 |
| xdsl2ChConfProfDsDataRateDs Data Rate Threshold Downshift for Downstream direction. A
'Down-Shift rate change' event is triggered when the
actual downstream data rate is below the data rate at the last
entr… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.19 |
| xdsl2ChConfProfUsDataRateUs Data Rate Threshold Upshift for Upstream direction. An
'Up-Shift rate change' event is triggered when the
actual upstream data rate exceeds, by more than the threshold,
the data … | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.20 |
| xdsl2ChConfProfDsDataRateUs Data Rate Threshold Downshift for Upstream direction. A
'Down-Shift rate change' event is triggered when the
actual upstream data rate is below the data rate at the last
… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.21 |
| xdsl2ChConfProfImaEnabled IMA Mode Enable. The parameter enables the IMA operation
mode in the ATM Data Path. Relevant only if the channel is of
ATM Data Path. When in 'enable' state, the ATM Data
Path … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.251.1.5.2.1.1.22 |
| xdsl2ChConfProfMaxDelayVar Maximum delay variation (DVMAX).
This optional VDSL2-specific parameter specifies the maximum
value for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254… | column | 0.1 milliseconds Unsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.23 |
| xdsl2ChConfProfInitPolicy Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initia… | column | VDSL2-LINE-TC-MIBXdsl2ChInitPolicy | .1.3.6.1.2.1.10.251.1.5.2.1.1.24 |
| xdsl2ChConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.251.1.5.2.1.1.25 |
| xdsl2ChConfProfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.3 |
| xdsl2ChConfProfMinResDataRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.4 |
| xdsl2ChConfProfMinResDataRateUs Minimum Reserved Data Rate on Upstream direction. The
minimum reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation M… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.5 |
| xdsl2ChConfProfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.6 |
| xdsl2ChConfProfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.7 |
| xdsl2ChConfProfMinDataRateLowPwrDs This parameter specifies the minimum net data rate for
the bearer channel as desired by the operator of the system
during the low power state (L1/L2). The power management low
po… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.8 |
| xdsl2ChConfProfMinDataRateLowPwrUs This parameter specifies the minimum net data rate for
the bearer channel as desired by the operator of the system
during the low power state (L1/L2). The power management low
po… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.5.2.1.1.9 |