vdslPhysCurrAttainableRate
VDSL-LINE-MIB ·
.1.3.6.1.2.1.10.97.1.1.2.1.9
Object
Indicates the maximum currently attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are equal. Note: 1 kbps = 1000 bps.
Context
- MIB
- VDSL-LINE-MIB
- OID
.1.3.6.1.2.1.10.97.1.1.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- kbps
- Parent
- vdslPhysEntry
- Table
- vdslPhysTable
- Siblings
- 9
Syntax
kbps SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdslPhysSide Identifies whether the transceiver is the Vtuc or Vtur. | column | VdslLineEntity | .1.3.6.1.2.1.10.97.1.1.2.1.1 |
| vdslPhysCurrLineRate Indicates the current data rate in steps of 1000
bits/second by the Vtu. This value will be less than
or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
1000 bps. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.2.1.10.97.1.1.2.1.10 |
| vdslPhysInvSerialNumber The vendor specific string that identifies the
vendor equipment. | column | OctetString | .1.3.6.1.2.1.10.97.1.1.2.1.2 |
| vdslPhysInvVendorID The vendor ID code is a copy of the binary vendor
identification field expressed as readable characters
in hexadecimal notation. | column | OctetString | .1.3.6.1.2.1.10.97.1.1.2.1.3 |
| vdslPhysInvVersionNumber The vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field expressed as
readable characters in he… | column | OctetString | .1.3.6.1.2.1.10.97.1.1.2.1.4 |
| vdslPhysCurrSnrMgn Noise Margin as seen by this Vtu with respect to its
received signal in 0.25dB. The effective range is
-31.75 to +31.75 dB. | column | 0.25dBm Integer32 | .1.3.6.1.2.1.10.97.1.1.2.1.5 |
| vdslPhysCurrAtn Measured difference in the total power transmitted by
the peer Vtu and the total power received by this Vtu.
The effective range is 0 to +63.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.2.1.10.97.1.1.2.1.6 |
| vdslPhysCurrStatus Indicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There are no defects on… | column | Bits | .1.3.6.1.2.1.10.97.1.1.2.1.7 |
| vdslPhysCurrOutputPwr Measured total output power transmitted by this VTU.
This is the measurement that was reported during
the last activation sequence. | column | 0.1dBm Integer32 | .1.3.6.1.2.1.10.97.1.1.2.1.8 |