VDSL-LINE-MIB Table View

This table includes common attributes describing
both ends of the line.  It is required for all VDSL
physical interfaces.  VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97).

vdslLineEntry row .1.3.6.1.2.1.10.97.1.1.1.1

An entry in the vdslLineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vdslLineCoding Specifies the VDSL coding type used on this line.	VdslLineCodingType Type Values: 1 other 2 mcm 3 scm	.1.3.6.1.2.1.10.97.1.1.1.1.1
vdslLineType Defines the type of VDSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object define…	Enumeration Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.2.1.10.97.1.1.1.1.2
vdslLineConfProfile The value of this object identifies the row in the VDSL Line Configuration Profile Table, vdslLineConfProfileTable, which applies for this VDSL line, and channels if applicable. This object MUST be mainta…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.97.1.1.1.1.3
vdslLineAlarmConfProfile The value of this object identifies the row in the VDSL Line Alarm Configuration Profile Table, vdslLineAlarmConfProfileTable, which applies to this VDSL line, and channels if applicable. This object MUST…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.97.1.1.1.1.4

This table provides one row for each Vtu.  Each row
contains the Physical Layer Parameters table for that
Vtu.  VDSL physical interfaces are those ifEntries where
ifType is equal to vdsl(97).

vdslPhysEntry row .1.3.6.1.2.1.10.97.1.1.2.1

An entry in the vdslPhysTable.

Indexes

IF-MIBifIndex vdslPhysSide

Column	Syntax	OID
vdslPhysSide Identifies whether the transceiver is the Vtuc or Vtur.	VdslLineEntity Type Values: 1 vtuc 2 vtur	.1.3.6.1.2.1.10.97.1.1.2.1.1
vdslPhysInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.10.97.1.1.2.1.2
vdslPhysInvVendorID The vendor ID code is a copy of the binary vendor identification field expressed as readable characters in hexadecimal notation.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.97.1.1.2.1.3
vdslPhysInvVersionNumber The vendor specific version number sent by this Vtu as part of the initialization messages. It is a copy of the binary version number field expressed as readable characters in hexadecimal notation.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.97.1.1.2.1.4
vdslPhysCurrSnrMgn Noise Margin as seen by this Vtu with respect to its received signal in 0.25dB. The effective range is -31.75 to +31.75 dB.	0.25dBmInteger32 Constraints: range: -127-127	.1.3.6.1.2.1.10.97.1.1.2.1.5
vdslPhysCurrAtn Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu. The effective range is 0 to +63.75 dB.	0.25dBmUnsigned32 Constraints: range: 0-255	.1.3.6.1.2.1.10.97.1.1.2.1.6
vdslPhysCurrStatus Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There are no defects on the line. 1 lossOfFram…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 lossOfSignalQuality 5 lossOfLink 6 dataInitFailure 7 configInitFailure 8 protocolInitFailure 9 noPeerVtuPresent	.1.3.6.1.2.1.10.97.1.1.2.1.7
vdslPhysCurrOutputPwr Measured total output power transmitted by this VTU. This is the measurement that was reported during the last activation sequence.	0.1dBmInteger32 Constraints: range: 0-160	.1.3.6.1.2.1.10.97.1.1.2.1.8
vdslPhysCurrAttainableRate Indicates the maximum currently attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are …	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.2.1.9
vdslPhysCurrLineRate Indicates the current data rate in steps of 1000 bits/second by the Vtu. This value will be less than or equal to vdslPhysCurrAttainableRate. Note: 1 kbps = 1000 bps.	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.2.1.10

This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).

vdslChanEntry row .1.3.6.1.2.1.10.97.1.1.3.1

An entry in the vdslChanTable.

Indexes

IF-MIBifIndex vdslPhysSide

Column	Syntax	OID
vdslChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent input bytes at the interleave…	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.3.1.1
vdslChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates.	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.3.1.2
vdslChanCurrTxRate Actual transmit data rate on this channel. Note: 1 kbps = 1000 bps.	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.3.1.3
vdslChanCurrTxSlowBurstProtect Actual level of impulse noise (burst) protection for an interleaved (slow) channel. This parameter is not applicable to fast channels. For fast channels, a value of zero shall be returned.	microsecondsUnsigned32 Constraints: range: 0-1275	.1.3.6.1.2.1.10.97.1.1.3.1.4
vdslChanCurrTxFastFec Actual Forward Error Correction (FEC) redundancy related overhead for a fast channel. This parameter is not applicable to an interleaved (slow) channel. For interleaved channels, a value of zero shall be returned.	%Unsigned32 Constraints: range: 0-50	.1.3.6.1.2.1.10.97.1.1.3.1.5

This table provides one row for each VDSL physical
interface.  VDSL physical interfaces are those ifEntries
where ifType is equal to vdsl(97).

vdslPerfDataEntry row .1.3.6.1.2.1.10.97.1.1.4.1

An entry in the vdslPerfDataTable.

Indexes

IF-MIBifIndex vdslPhysSide

Column	Syntax	OID
vdslPerfDataValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfValidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.4.1.1
vdslPerfDataInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfInvalidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.4.1.2
vdslPerfDataLofs Count of seconds since the unit was last reset that there was Loss of Framing.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.3
vdslPerfDataLoss Count of seconds since the unit was last reset that there was Loss of Signal.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.4
vdslPerfDataLprs Count of seconds since the unit was last reset that there was Loss of Power.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.5
vdslPerfDataLols Count of seconds since the unit was last reset that there was Loss of Link.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.6
vdslPerfDataESs Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defects.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.7
vdslPerfDataSESs Count of Severely Errored Seconds since the unit was last reset.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.8
vdslPerfDataUASs Count of Unavailable Seconds since the unit was last reset.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.9
vdslPerfDataInits Count of the line initialization attempts since the unit was last reset. This count includes both successful and failed attempts.	occurrencesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.10
vdslPerfDataCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.4.1.11
vdslPerfDataCurr15MinLofs Count of seconds during this interval that there was Loss of Framing.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.12
vdslPerfDataCurr15MinLoss Count of seconds during this interval that there was Loss of Signal.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.13
vdslPerfDataCurr15MinLprs Count of seconds during this interval that there was Loss of Power.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.14
vdslPerfDataCurr15MinLols Count of seconds during this interval that there was Loss of Link.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.15
vdslPerfDataCurr15MinESs Count of Errored Seconds during this interval. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defects.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.16
vdslPerfDataCurr15MinSESs Count of Severely Errored Seconds during this interval.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.17
vdslPerfDataCurr15MinUASs Count of Unavailable Seconds during this interval.	secondsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.18
vdslPerfDataCurr15MinInits Count of the line initialization attempts during this interval. This count includes both successful and failed attempts.	occurrencesHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.4.1.19
vdslPerfData1DayValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfValidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.4.1.20
vdslPerfData1DayInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfInvalidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.4.1.21
vdslPerfDataCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.4.1.22
vdslPerfDataCurr1DayLofs Count of Loss of Framing (LOF) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.23
vdslPerfDataCurr1DayLoss Count of Loss of Signal (LOS) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.24
vdslPerfDataCurr1DayLprs Count of Loss of Power (LPR) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.25
vdslPerfDataCurr1DayLols Count of Loss of Link (LOL) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.26
vdslPerfDataCurr1DayESs Count of Errored Seconds (ES) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.27
vdslPerfDataCurr1DaySESs Count of Severely Errored Seconds (SES) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.28
vdslPerfDataCurr1DayUASs Count of Unavailable Seconds (UAS) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.29
vdslPerfDataCurr1DayInits Count of the line initialization attempts since the beginning of the current 1-day interval. This count includes both successful and failed attempts.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.4.1.30

This table provides one row for each Vtu performance
data collection interval.  VDSL physical interfaces are
          
those ifEntries where ifType is equal to vdsl(97).

vdslPerfIntervalEntry row .1.3.6.1.2.1.10.97.1.1.5.1

An entry in the vdslPerfIntervalTable.

Indexes

IF-MIBifIndex vdslPhysSide vdslPerfIntervalNumber

Column	Syntax	OID
vdslPerfIntervalNumber Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.2.1.10.97.1.1.5.1.1
vdslPerfIntervalLofs Count of seconds in the interval when there was Loss of Framing.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.2
vdslPerfIntervalLoss Count of seconds in the interval when there was Loss of Signal.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.3
vdslPerfIntervalLprs Count of seconds in the interval when there was Loss of Power.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.4
vdslPerfIntervalLols Count of seconds in the interval when there was Loss of Link.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.5
vdslPerfIntervalESs Count of Errored Seconds (ES) in the interval. An Errored Second is a one-second interval containing one or more CRC anomalies, one or more LOS or LOF defects.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.6
vdslPerfIntervalSESs Count of Severely Errored Seconds in the interval.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.7
vdslPerfIntervalUASs Count of Unavailable Seconds in the interval.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.8
vdslPerfIntervalInits Count of the line initialization attempts during this interval. This count includes both successful and failed attempts.	HC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.5.1.9

This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.

vdslPerf1DayIntervalEntry row .1.3.6.1.2.1.10.97.1.1.6.1

An entry in the vdslPerf1DayIntervalTable.

Indexes

IF-MIBifIndex vdslPhysSide vdslPerf1DayIntervalNumber

Column	Syntax	OID
vdslPerf1DayIntervalNumber History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.2.1.10.97.1.1.6.1.1
vdslPerf1DayIntervalMoniSecs The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring dat…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.6.1.2
vdslPerf1DayIntervalLofs Count of Loss of Frame (LOF) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.3
vdslPerf1DayIntervalLoss Count of Loss of Signal (LOS) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.4
vdslPerf1DayIntervalLprs Count of Loss of Power (LPR) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.5
vdslPerf1DayIntervalLols Count of Loss of Link (LOL) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.6
vdslPerf1DayIntervalESs Count of Errored Seconds (ES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.7
vdslPerf1DayIntervalSESs Count of Severely Errored Seconds (SES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.8
vdslPerf1DayIntervalUASs Count of Unavailable Seconds (UAS) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.9
vdslPerf1DayIntervalInits Count of the line initialization attempts during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. This count includes both successful and failed attempts.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.6.1.10

This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).

vdslChanPerfDataEntry row .1.3.6.1.2.1.10.97.1.1.7.1

An entry in the vdslChanPerfDataTable.

Indexes

IF-MIBifIndex vdslPhysSide

Column	Syntax	OID
vdslChanValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfValidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.7.1.1
vdslChanInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsHC-PerfHist-TC-MIBHCPerfInvalidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.7.1.2
vdslChanFixedOctets Count of corrected octets since the unit was last reset.	octetsHCNUM-TCZeroBasedCounter64	.1.3.6.1.2.1.10.97.1.1.7.1.3
vdslChanBadBlks Count of uncorrectable blocks since the unit was last reset.	blocksHCNUM-TCZeroBasedCounter64	.1.3.6.1.2.1.10.97.1.1.7.1.4
vdslChanCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.7.1.5
vdslChanCurr15MinFixedOctets Count of corrected octets in this interval.	octetsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.7.1.6
vdslChanCurr15MinBadBlks Count of uncorrectable blocks in this interval.	blocksHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.7.1.7
vdslChan1DayValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	HC-PerfHist-TC-MIBHCPerfValidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.7.1.8
vdslChan1DayInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	HC-PerfHist-TC-MIBHCPerfInvalidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.10.97.1.1.7.1.9
vdslChanCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.7.1.10
vdslChanCurr1DayFixedOctets Count of corrected octets since the beginning of the current 1-day interval.	octetsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.7.1.11
vdslChanCurr1DayBadBlks Count of uncorrectable blocks since the beginning of the current 1-day interval.	blocksHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.7.1.12

This table provides one row for each Vtu channel data
collection interval.  VDSL channel interfaces are those
ifEntries where ifType is equal to interleave(124) or
fast(125).

vdslChanIntervalEntry row .1.3.6.1.2.1.10.97.1.1.8.1

An entry in the vdslChanIntervalTable.

Indexes

IF-MIBifIndex vdslPhysSide vdslChanIntervalNumber

Column	Syntax	OID
vdslChanIntervalNumber Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.2.1.10.97.1.1.8.1.1
vdslChanIntervalFixedOctets Count of corrected octets in this interval.	octetsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.8.1.2
vdslChanIntervalBadBlks Count of uncorrectable blocks in this interval.	blocksHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.10.97.1.1.8.1.3

This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.

vdslChan1DayIntervalEntry row .1.3.6.1.2.1.10.97.1.1.9.1

An entry in the vdslChan1DayIntervalTable.

Indexes

IF-MIBifIndex vdslPhysSide vdslChan1DayIntervalNumber

Column	Syntax	OID
vdslChan1DayIntervalNumber History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.2.1.10.97.1.1.9.1.1
vdslChan1DayIntervalMoniSecs The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring dat…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.97.1.1.9.1.2
vdslChan1DayIntervalFixedOctets Count of corrected octets in this interval.	octetsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.9.1.3
vdslChan1DayIntervalBadBlks Count of uncorrectable blocks in this interval.	blocksHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.10.97.1.1.9.1.4

This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
          
Entries in this table MUST be maintained in a
persistent manner.

vdslLineConfProfileEntry row .1.3.6.1.2.1.10.97.1.1.11.1

Each entry consists of a list of parameters that
represents the configuration of a VDSL line.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific…

Indexes

vdslLineConfProfileName

Column	Syntax	OID
vdslLineConfProfileName This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this docu…	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.97.1.1.11.1.1
vdslLineConfDownRateMode Specifies the rate selection behavior for the line in the downstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line based upon line quality.	Enumerationr/w Enumerated Values: 1 manual 2 adaptAtInit	.1.3.6.1.2.1.10.97.1.1.11.1.2
vdslLineConfUpRateMode Specifies the rate selection behavior for the line in the upstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line based upon line quality.	Enumerationr/w Enumerated Values: 1 manual 2 adaptAtInit	.1.3.6.1.2.1.10.97.1.1.11.1.3
vdslLineConfDownMaxPwr Specifies the maximum aggregate downstream power level in the range 0 to 14.5 dBm.	0.25dBmUnsigned32r/w Constraints: range: 0-58	.1.3.6.1.2.1.10.97.1.1.11.1.4
vdslLineConfUpMaxPwr Specifies the maximum aggregate upstream power level in the range 0 to 14.5 dBm.	0.25dBmUnsigned32r/w Constraints: range: 0-58	.1.3.6.1.2.1.10.97.1.1.11.1.5
vdslLineConfDownMaxSnrMgn Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.6
vdslLineConfDownMinSnrMgn Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.7
vdslLineConfDownTargetSnrMgn Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initia…	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.8
vdslLineConfUpMaxSnrMgn Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.9
vdslLineConfUpMinSnrMgn Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.10
vdslLineConfUpTargetSnrMgn Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initial…	0.25dBmUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.97.1.1.11.1.11
vdslLineConfDownFastMaxDataRate Specifies the maximum downstream fast channel data rate in steps of 1000 bits/second.	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.12
vdslLineConfDownFastMinDataRate Specifies the minimum downstream fast channel data rate in steps of 1000 bits/second.	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.13
vdslLineConfDownSlowMaxDataRate Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and…	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.14
vdslLineConfDownSlowMinDataRate Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and…	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.15
vdslLineConfUpFastMaxDataRate Specifies the maximum upstream fast channel data rate in steps of 1000 bits/second. The maximum aggregate upstream transmit speed of the line can be derived from the sum of maximum upstream fast and slow …	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.16
vdslLineConfUpFastMinDataRate Specifies the minimum upstream fast channel data rate in steps of 1000 bits/second. The minimum aggregate upstream transmit speed of the line can be derived from the sum of minimum upstream fast and slow …	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.17
vdslLineConfUpSlowMaxDataRate Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second.	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.18
vdslLineConfUpSlowMinDataRate Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second.	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.19
vdslLineConfDownRateRatio For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This object specifies the ratio of the allocation of the excess data …	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.2.1.10.97.1.1.11.1.20
vdslLineConfUpRateRatio For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This object specifies the ratio of the allocation of the excess data …	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.2.1.10.97.1.1.11.1.21
vdslLineConfDownMaxInterDelay Specifies the maximum interleave delay for the downstream slow channel.	millisecondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.97.1.1.11.1.22
vdslLineConfUpMaxInterDelay Specifies the maximum interleave delay for the upstream slow channel.	millisecondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.97.1.1.11.1.23
vdslLineConfDownPboControl Downstream power backoff (PBO) control for this line. For transceivers which do not support downstream PBO control, this object MUST be fixed at disabled(1). If auto(2) is selected, the transceiver will automatically a…	Enumerationr/w Enumerated Values: 1 disabled 2 auto 3 manual	.1.3.6.1.2.1.10.97.1.1.11.1.24
vdslLineConfUpPboControl Upstream power backoff (PBO) control for this line. For transceivers which do not support upstream PBO control, this object MUST be fixed at disabled(1). If auto(2) is selected, the transceiver will automatically adjus…	Enumerationr/w Enumerated Values: 1 disabled 2 auto 3 manual	.1.3.6.1.2.1.10.97.1.1.11.1.25
vdslLineConfDownPboLevel Specifies the downstream backoff level to be used when vdslLineConfDownPboControl = manual(3).	0.25dBUnsigned32r/w Constraints: range: 0-160	.1.3.6.1.2.1.10.97.1.1.11.1.26
vdslLineConfUpPboLevel Specifies the upstream backoff level to be used when vdslLineConfUpPboControl = manual(3).	0.25dBUnsigned32r/w Constraints: range: 0-160	.1.3.6.1.2.1.10.97.1.1.11.1.27
vdslLineConfDeploymentScenario The VDSL line deployment scenario. When using fttCab(1), the VTU-C is located in a street cabinet. When using fttEx(2), the VTU-C is located at the central office. Changes to this value will have no effect on the tran…	Enumerationr/w Enumerated Values: 1 fttCab 2 fttEx 3 other	.1.3.6.1.2.1.10.97.1.1.11.1.28
vdslLineConfAdslPresence Indicates presence of ADSL service in the associated cable bundle/binder. none(1) indicates no ADSL service in the bundle adslOverPots(2) indicates ADSL service over POTS is presen…	Enumerationr/w Enumerated Values: 1 none 2 adslOverPots 3 adslOverISDN	.1.3.6.1.2.1.10.97.1.1.11.1.29
vdslLineConfApplicableStandard The VDSL standard to be used for the line. ansi(1) indicates ANSI standard etsi(2) indicates ETSI standard itu(3) indicates ITU standard other(4) indicates a standard other than the ab…	Enumerationr/w Enumerated Values: 1 ansi 2 etsi 3 itu 4 other	.1.3.6.1.2.1.10.97.1.1.11.1.30
vdslLineConfBandPlan The VDSL band plan to be used for the line. bandPlan997(1) is to be used for ITU-T G.993.1 Bandplan-B ETSI Bandplan ANSI Plan 997 bandPlan998(2) is to be used for ITU-T …	Enumerationr/w Enumerated Values: 1 bandPlan997 2 bandPlan998 3 bandPlanFx 4 other	.1.3.6.1.2.1.10.97.1.1.11.1.31
vdslLineConfBandPlanFx The frequency limit between bands D2 and U2 when vdslLineConfBandPlan is set to bandPlanFx(3).	kHzUnsigned32r/w Constraints: range: 3750-12000	.1.3.6.1.2.1.10.97.1.1.11.1.32
vdslLineConfBandOptUsage Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). unused(1) indicates Opt is unused upstream(2) indicates Opt usage is for upstream downstream(3) indicates Opt usage …	Enumerationr/w Enumerated Values: 1 unused 2 upstream 3 downstream	.1.3.6.1.2.1.10.97.1.1.11.1.33
vdslLineConfUpPsdTemplate The upstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted PSD within the internationally standardized HAM (Handheld Amateur Radio) radio bands, while …	Enumerationr/w Enumerated Values: 1 templateMask1 2 templateMask2	.1.3.6.1.2.1.10.97.1.1.11.1.34
vdslLineConfDownPsdTemplate The downstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted PSD within the internationally standardized HAM (Handheld Amateur Radio) radio bands, whil…	Enumerationr/w Enumerated Values: 1 templateMask1 2 templateMask2	.1.3.6.1.2.1.10.97.1.1.11.1.35
vdslLineConfHamBandMask The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio…	Bitsr/w Enumerated Values: 0 customNotch1 1 customNotch2 2 amateurBand30m 3 amateurBand40m 4 amateurBand80m 5 amateurBand160m	.1.3.6.1.2.1.10.97.1.1.11.1.36
vdslLineConfCustomNotch1Start Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST be less than or equal to vdslLineConfCustomNotch1Stop.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.37
vdslLineConfCustomNotch1Stop Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST be greater than or equal to vdslLineConfCustomNotch1Start.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.38
vdslLineConfCustomNotch2Start Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST be less than or equal to vdslLineConfCustomNotch2Stop.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.39
vdslLineConfCustomNotch2Stop Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST be greater than or equal to vdslLineConfCustomNotch2Start.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.97.1.1.11.1.40
vdslLineConfDownTargetSlowBurst Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel.	microsecondsUnsigned32r/w Constraints: range: 0-1275	.1.3.6.1.2.1.10.97.1.1.11.1.41
vdslLineConfUpTargetSlowBurst Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel.	microsecondsUnsigned32r/w Constraints: range: 0-1275	.1.3.6.1.2.1.10.97.1.1.11.1.42
vdslLineConfDownMaxFastFec This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel.	%Unsigned32r/w Constraints: range: 0-50	.1.3.6.1.2.1.10.97.1.1.11.1.43
vdslLineConfUpMaxFastFec This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel.	%Unsigned32r/w Constraints: range: 0-50	.1.3.6.1.2.1.10.97.1.1.11.1.44
vdslLineConfLineType This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be oth…	Enumerationr/w Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.2.1.10.97.1.1.11.1.45
vdslLineConfProfRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profil…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.97.1.1.11.1.46

This table contains information on the VDSL line alarm
configuration.  One entry in this table reflects a profile
defined by a manager which can be used to configure the
VDSL line alarm thresholds.
          
Entries in this table MUST be maintained in a
persistent manner.

vdslLineAlarmConfProfileEntry row .1.3.6.1.2.1.10.97.1.1.20.1

Each entry consists of a list of parameters that
represents the configuration of a VDSL line alarm
profile.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to v…

Indexes

vdslLineAlarmConfProfileName

Column	Syntax	OID
vdslLineAlarmConfProfileName The name for this profile as specified by an administrator.	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.97.1.1.20.1.1
vdslLineAlarmConfThresh15MinLofs This object configures the threshold for the number of loss of frame seconds (lofs) within any given 15-minute performance data collection interval. If the value of loss of frame seconds in a particular 15-minute colle…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.2
vdslLineAlarmConfThresh15MinLoss This object configures the threshold for the number of loss of signal seconds (loss) within any given 15-minute performance data collection interval. If the value of loss of signal seconds in a particular 15-minute col…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.3
vdslLineAlarmConfThresh15MinLprs This object configures the threshold for the number of loss of power seconds (lprs) within any given 15-minute performance data collection interval. If the value of loss of power seconds in a particular 15-minute colle…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.4
vdslLineAlarmConfThresh15MinLols This object configures the threshold for the number of loss of link seconds (lols) within any given 15-minute performance data collection interval. If the value of loss of power seconds in a particular 15-minute collec…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.5
vdslLineAlarmConfThresh15MinESs This object configures the threshold for the number of errored seconds (ESs) within any given 15-minute performance data collection interval. If the value of errored seconds in a particular 15-minute collection interva…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.6
vdslLineAlarmConfThresh15MinSESs This object configures the threshold for the number of severely errored seconds (SESs) within any given 15-minute performance data collection interval. If the value of severely errored seconds in a particular 15-minute…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.7
vdslLineAlarmConfThresh15MinUASs This object configures the threshold for the number of unavailable seconds (UASs) within any given 15-minute performance data collection interval. If the value of unavailable seconds in a particular 15-minute collectio…	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.97.1.1.20.1.8
vdslLineAlarmConfInitFailure This object specifies if a vdslInitFailureNotification notification will be generated if an initialization failure occurs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.97.1.1.20.1.9
vdslLineAlarmConfProfRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profil…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.97.1.1.20.1.10