tnSysIpAclNetIfFilterTable

TROPIC-SYSTEM-MIB · .1.3.6.1.4.1.7483.2.1.1.2.17.9
MIB view Table view

Object

table 
The IP ACL NetIf table is used to associate or
disassociate filters with particular NetIf.  Two
filters may be associated with each NetIf, one
receive and one transmit.  The receive and transmit
filters on an NetIf may be independently enabled
and disabled on that NetIf without disassociating
the specific filter numbers.

Context

MIB
TROPIC-SYSTEM-MIB
OID
.1.3.6.1.4.1.7483.2.1.1.2.17.9
Type
table
Status
current
Parent
tnSysAccessControlList
Siblings
20
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnSysIpAclSysDefaultnode-.1.3.6.1.4.1.7483.2.1.1.2.17.1
tnSysIpAclIpv6PatternAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.10
tnSysIpAclIpv6PatternTable
Table of IPV6 ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fi…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.11
tnSysIpAclIpv6FilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.12
tnSysIpAclIpv6FilterTable
An ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pat…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.13
tnSysIpAclIpv6InterfaceAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.14
tnSysIpAclIpv6InterfaceTable
The IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.15
tnSysIpv6AclNetIfFilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.16
tnSysIpv6AclNetIfFilterTable
The IP ACL NetIf table is used to associate or disassociate filters with particular NetIf. Two filters may be associated with each NetIf, one receive and one transmit. The recei…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.17
tnSysIpAclEthIfFilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.18
tnSysIpAclEthIfFilterTable
The IP ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The recei…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.19
tnSysIpAclPatternAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.2
tnSysIpv6AclEthIfFilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.20
tnSysIpv6AclEthIfFilterTable
The IPV6 ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The rec…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.21
tnSysIpAclPatternTable
Table of IP ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fit …
table-.1.3.6.1.4.1.7483.2.1.1.2.17.3
tnSysIpAclFilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.4
tnSysIpAclFilterTable
An ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pat…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.5
tnSysIpAclInterfaceAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.6
tnSysIpAclInterfaceTable
The IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated…
table-.1.3.6.1.4.1.7483.2.1.1.2.17.7
tnSysIpAclNetIfFilterAttributeTotal
.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.1.2.17.8
Child Objects
ObjectTypeSyntaxOID
tnSysIpAclNetIfFilterEntry
.
row-.1.3.6.1.4.1.7483.2.1.1.2.17.9.1