tnSysConfiguredSnmpSourceIPv6
TROPIC-SYSTEM-MIB ·
.1.3.6.1.4.1.7483.2.1.1.2.2.25
Object
When set to false, SNMP requests can be made
using any of the NEs interface IP addresses or
Loopback IPv6 address. The source IP address in
SNMP trap/reply messages shall be the interface
IP address on which the packet leaves the NE.
Hence it is the SNMP clients responsibility to
be able to associate an NE with multiple IP
addresses.
When set to true, SNMP requests can be made
using ONLY the NEs Loopback IPv6 address. The
source IP address in SNMP trap/reply messages
shall be fixed as the Loopback IP. Hence SNMP
clients need only have a single association to
the NEs Loopback IPv6 address.
Context
- MIB
- TROPIC-SYSTEM-MIB
- OID
.1.3.6.1.4.1.7483.2.1.1.2.2.25- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tnSysControlNetwork
- Siblings
- 25
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnSysIpAddress System's IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.1 |
| tnSysOcs2LinkStatus Shows the link status of 2nd Optical Cross-connect
System(OCS). | scalar | AluWdmOcsLinkStatus | .1.3.6.1.4.1.7483.2.1.1.2.2.10 |
| tnSysOcs3LinkStatus Shows the link status of 3rd Optical Cross-connect
System(OCS). | scalar | AluWdmOcsLinkStatus | .1.3.6.1.4.1.7483.2.1.1.2.2.11 |
| tnSysConfiguredRadiusSource When set to true, the radius client will only use
the Loopback IP. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.1.2.2.12 |
| tnSysConfiguredLoopbackIp1 . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.13 |
| tnSysConfiguredLoopbackIp1SubnetMask . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.14 |
| tnSysConfiguredSnmpSource1 When set to false, SNMP requests can be made
using any of the NEs interface IP addresses or
Loopback IP address. The source IP address in
SNMP trap/reply messages shall be the in… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.1.2.2.15 |
| tnSysConfiguredRadiusSource1 When set to true, the radius client will only use
the Loopback IP1. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.1.2.2.16 |
| tnSysLoopbackIpAddress1 . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.17 |
| tnSysLoopbackIp1SubnetMask . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.18 |
| tnSysConfiguredInetAddressType The value specifies the type of Internet address
stored in tnSysConfiguredInetAddress. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7483.2.1.1.2.2.19 |
| tnSysSubnetMask Subnet Mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.2 |
| tnSysConfiguredInetAddress Indicates the IPv6 address of the Loopback IP | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.20 |
| tnSysConfiguredPrefixLength Prefix length of the IPV6 of the Loopback. | scalar | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.7483.2.1.1.2.2.21 |
| tnSysOcsIp1Password The password used to access OCS NE.
When read, this attribute will return an empty
string if the password has not been set and
'********' if it has been set. | scalar | OctetString | .1.3.6.1.4.1.7483.2.1.1.2.2.22 |
| tnSysOcsIp2Password The password used to access OCS NE.
When read, this attribute will return an empty
string if the password has not been set and
'********' if it has been set. | scalar | OctetString | .1.3.6.1.4.1.7483.2.1.1.2.2.23 |
| tnSysOcsIp3Password The password used to access OCS NE.
When read, this attribute will return an empty
string if the password has not been set and
'********' if it has been set. | scalar | OctetString | .1.3.6.1.4.1.7483.2.1.1.2.2.24 |
| tnSysConfiguredRadiusSourceIPv6 When set to true, the radius client will only use
the Loopback IPv6. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.1.2.2.26 |
| tnSysConfiguredIpAddress . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.3 |
| tnSysConfiguredSubnetMask . | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.4 |
| tnSysConfiguredSnmpSource When set to false, SNMP requests can be made
using any of the NEs interface IP addresses or
Loopback IP address. The source IP address in
SNMP trap/reply messages shall be the in… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.1.2.2.5 |
| tnSysConfiguredOcsIpAddress Optical Cross-connect System (OCS) IP address.
R9.0:
We now support two OCS Nodes(WDMx2OCS) and this mib is
meant for OCS node. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.6 |
| tnSysConfiguredOcs2IpAddress Optical Cross-connect System (OCS) IP address.
R9.0:
we now support upto three OCS Nodes(WDMx3OCS) and
this attribute is meant for 2nd OCS node. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.7 |
| tnSysConfiguredOcs3IpAddress Optical Cross-connect System (OCS) IP address.
R9.0:
we now support upto three OCS Nodes(WDMx3OCS) and
this mib is meant for 3rd OCS node. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.1.1.2.2.8 |
| tnSysOcs1LinkStatus Shows the link status of 1st Optical Cross-connect
System(OCS). | scalar | AluWdmOcsLinkStatus | .1.3.6.1.4.1.7483.2.1.1.2.2.9 |