tnSyncELineRefProvQL
TROPIC-SYNCE-MIB ·
.1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.12
Object
Manually provisioned incoming SSM value for the line
reference. The value can be:
0 - AUTO
When the NE is in SDH mode:
1 - PRC
2 - SSU_A
3 - SSU_B
4 - SEC
5 - DNU
23 - ePRTC
24 - PRTC
25 - ePRC
26 - eSEC
When the NE works in SONET mode:
11 - PRS
12 - STU
13 - ST2
14 - TNC
15 - ST3E
16 - ST3
17 - SMC
18 - ST4
19 - DUS
20 - PNO
23 - ePRTC
24 - PRTC
25 - ePRC
Note: The parameter can be provisioned only when
SyncELineRefIncSSMSupp is enabled.
Context
- MIB
- TROPIC-SYNCE-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnSyncELineRefEntry
- Table
- tnSyncELineRefTable
- Siblings
- 25
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnSyncELineRefIndex The ifIndex of the line reference table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.1 |
| tnSyncELineRefIncSSMStatus This object indicates the current status of incoming
QL on that port.
0: Valid
1: Invalid
2: Not Supported
3: Not Applicable
It's applicable … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.10 |
| tnSyncELineRefIncSSMSupp Enable or disable the line reference incoming QL processing. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.11 |
| tnSyncELineRefAssociatedPort The associated physical port of the line
reference. This parameter replaces
tnSyncELineRefAssignedPort in order to support
assigning a line reference to a port in other
slots. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.13 |
| tnSyncELineRefPriorityOfStationClock Line reference priority for the output station
clock.
Current configurable range: 0 to 8. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.14 |
| tnSyncELineRefLockOutOfStationClock If lock out the line reference or not for the
output station clock. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.15 |
| tnSyncELineRefSwStateOfStationClock The Sync-E line reference switch state of the
output station clock. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.16 |
| tnSyncELineRefCurrentFreqOff The current frequency offset of the timing reference. | column | ppb SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.17 |
| tnSyncELineRefAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.18 |
| tnSyncELineRefIncExtdQLTLVClockID Incoming Extended QL TLV Clock ID. | column | TROPIC-PTP-MIBAluWdmPtpClockIdentifier | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.19 |
| tnSyncELineRefAssignedPort The assigned port for the line reference. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.2 |
| tnSyncELineRefIncExtdQLTLVMixedClockType Incoming Extended QL TLV Mixed Clock Type Flag. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.20 |
| tnSyncELineRefIncExtdQLTLVPartialChain Incoming Extended QL TLV Partial Chain Flag. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.21 |
| tnSyncELineRefIncExtdQLTLVNumeEEC Incoming Extended QL TLV Number of eEEC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.22 |
| tnSyncELineRefIncExtdQLTLVNumEEC Incoming Extended QL TLV Number of EEC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.23 |
| tnSyncELineRefProvQLOfStationClock Manually provisioned incoming SSM value
of the line reference output timing.
The value can be:
0 - AUTO
When the NE is in SDH mode:
1 - PRC
2 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.24 |
| tnSyncELineRefIncSSMMsgOfStationClock This object indicates the current value of incoming
QL for output timing on that port.
30 - unstable
31 - not applicable
When the NE works in SDH mode:
0 - U… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.25 |
| tnSyncELineRefIncSSMStatusOfStationClock This object indicates the current status of incoming
QL on that port for output timing.
0: Valid
1: Invalid
2: Not Supported
3: Not Applicable
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.26 |
| tnSyncELineRefPriority Line reference priority.
Current configurable range: 0 to 8. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.3 |
| tnSyncELineRefAdminState The administrative state of the line reference. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.4 |
| tnSyncELineRefOperState The operating state of the line reference. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.5 |
| tnSyncELineLockOut If lock out line reference or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.6 |
| tnSyncELineRefState The Sync-E line reference state. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.7 |
| tnSyncELineRefSwState The Sync-E line reference switch state. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.8 |
| tnSyncELineRefIncSSMMsg This object indicates the current value of incoming
QL on that port.
30 - unstable
31 - not applicable
When the NE works in SDH mode:
0 - Unknown
1 - PRC
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.9 |