tnNetIfMtuNeg
TROPIC-L1SERVICE-MIB ·
.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13
Object
column
Integer32
The actual (negotiated) Maximum Transmission Unit size,in units of bytes with default value -1, when the MTU size has not yet been negotiated. The default value -1 should be interpreted by UIs as '-'.
Context
- MIB
- TROPIC-L1SERVICE-MIB
- OID
.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tnNetIfEntry
- Table
- tnNetIfTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnNetIfIndex Access identifier for the Network Interface Index. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.1 |
| tnNetIfOspfAuthKey Key used for OSPF MD5 128 bit hash value key
calculation on the interface. The string shall
be 0 to 16 uppercase or lowercase alphanumeric
characters. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.10 |
| tnNetIfOspfAuthKeyId Key used for OSPF MD5 128 bit hash value key
calculation on the interface.
Current configurable range: 1 to 255. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.11 |
| tnNetIfCnLinkAdjState NETIF OSPF adjacency state. | column | TropicOspfAdjacencyStateType | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.12 |
| tnNetIfOSPFAreaNumberId NETIF OSPF area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.14 |
| tnNetIfOspfRetransint Specifies the length of time, in seconds, that OSPF will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPF neighbor. The value should
be long… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.15 |
| tnNetIfOspfv3AdjStateId OSPFv3 Adj state. | column | TropicOspfAdjacencyStateType | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.16 |
| tnNetIfOspfNeighborRouterIp OSPF Neighbor Router ID. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.17 |
| tnNetIfOspfv3NeighborRouterIp OSPFv3 Neighbor Router ID. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.18 |
| tnNetIfOspfNeighborIp OSPF Neighbor IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.19 |
| tnNetIfTypeOfOperation Create, delete, or modify a network interface
instance over an ECC. | column | TROPIC-TCAluWdmTypeOfNetIfOperation | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.2 |
| tnNetIfOspfv3NeighborInetAddress Indicates the IPv6 address of OSPFv3 Neighbor. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.20 |
| tnNetIfIPv6LinkLocalInetAddress Indicates the IPv6 address of Link Local. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.21 |
| tnNetIfLcpEchoInterval NetIf LCP Echo Interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.22 |
| tnNetIfLcpEchoFailure NetIf LCP Echo Failure. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.23 |
| tnNetIfOspfStatus NetIf ospf status. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.24 |
| tnNetIfOspfv3AreaNumberId NETIF OSPFv3 area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.25 |
| tnNetIfOspfv3HelloInterval Specifies the hello interval for the interface.
The Hello interval specifies how often (in
seconds) a hello packet is sent out on the
interface. Hello packets are used to establis… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.26 |
| tnNetIfOspfv3Metric OSPFv3 Metric or Cost of the interface. The lower
the cost, the more preferred the interface is
for the routing of packets.
Current configurable range: 1 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.27 |
| tnNetIfOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPFv3 neighbor. The value should
be … | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.28 |
| tnNetIfOspfv3RtrDeadInterval OSPFv3 Router Dead Interval of the interface.
This is the time elapsed between not hearing a
router's Hello PDU before the interface OSPFv3
state is declared down. The dead inter… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.29 |
| tnNetIfStatus Administrative status of the network interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.3 |
| tnNetIfOspfv3ConfigRtrPriority The router priority of the link. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.30 |
| tnNetIfOspfv3Status NetIf ospfv3 status. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.31 |
| tnNetIfPacketType GCC packet type, which indicates if the NETIF
packet type is standard (std) or non-standard
(nonstd). Only provisionable for 4DPA4, 11DPE12,
11STAR1, and 11STMM10 pack related NE… | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.4 |
| tnNetIfMtu Maximum Transmission Unit size, in units of
bytes. This attribute can only be changed if
tnNetIfPacketType is std.
Current configurable range: 576 to 1500.
… | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.5 |
| tnNetIfHelloInterval Specifies the hello interval for the interface.
The Hello interval specifies how often (in
seconds) a hello packet is sent out on the
interface. Hello packets are used to establis… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.6 |
| tnNetIfRtrDeadInterval OSPF Router Dead Interval of the interface.
This is the time elapsed between not hearing a
router's Hello PDU before the interface OSPF
state is declared down. The dead interval … | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.7 |
| tnNetIfMetric OSPF Metric or Cost of the interface. The lower
the cost, the more preferred the interface is
for the routing of packets.
Current configurable range: 1 to 65535.
… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.8 |
| tnNetIfOspfAuthentType Specifies OSPF authentication on the interface
- only none and MD5 are currently supported. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.9.1.1.9 |