TROPIC-L1SERVICE-MIB Table View

The control network link table.

tnControlNetworkLinkEntry row .1.3.6.1.4.1.7483.2.3.1.2.1.1.1

The Control Network connection entry. For the
1696R, the index is a logical derived value
created by the system. For the 1830 PSS-32,
the index is the physical shelf/slot/port with
an exception for attribute tnCNLinkPh…

Indexes

IF-MIBifIndex

Column	Syntax	OID
tnCNLinkDescr .	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.1
tnCNLinkAdminStatus The Admin status of the link.	TropicLinkAdminStateTyper/w Type Values: 1 enabled 2 disabled 3 testing 4 locked	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.2
tnCNLinkOperStatus The Operational status of the link.	TropicLinkOperationalStateType Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.3
tnCNLinkPhysicalIfIndex The physical interface index of the link. SET on this attribute is currently not supported.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.5
tnCNLinkIpAddress .	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.7
tnCNLinkSubnetMask .	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.8
tnCNLinkHelloInterval The hello interval of the link. Current configurable range: 1 to 65535.	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.14
tnCNLinkRtrDeadInterval The router dead interval of the link. For 1830, the range is (1..'FFFF'h).	secondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.15
tnCNLinkTeMetric The Traffic eng metric of the link. For OSC, default is 10; for GCC OTU1, default is 40; for GCC OTU2 default is 30; for GCC OTU3 default is 20. Current configurable range: 1 to 65535.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.22
tnCNLinkOspfRoutingState .	NokiaCNLinkOspfRoutingStater/w Type Values: 1 disable 2 enable 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.31
tnCNLinkConfigIfType The OSPF interface type of the link.	Enumerationr/w Enumerated Values: 1 notValid 2 broadcast 3 nonBroadcastMultipleAccess 4 pointToPoint 5 virtual 6 pointToMultipoint	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.32
tnCNLinkConfigRtrPriority The router priority of the link.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.33
tnCNLinkEquipOperStatus The Operational status of the associated physical link.	TropicLinkOperationalStateType Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.34
tnCNLinkDhcpEnabled Indicates if DHCP is enabled on the link. Sets are restricted to the local ethernet port CN link.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.35
tnCNLinkSpeed .	Enumerationr/w Enumerated Values: 1 auto 2 rate10Mbps 3 rate100Mbps 4 rate1000Mbps	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.36
tnCNLinkDuplex .	Enumerationr/w Enumerated Values: 1 auto 2 half 3 full	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.37
tnCNLinkProxyArp Proxy Arp configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.38
tnCNLinkDHCPServer DHCP server configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.39
tnCNLinkDHCPRange DHCP range. Current configurable range: 0 to 10	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.40
tnCNLinkAdjState OSPF Adj state.	TropicOspfAdjacencyStateType Type Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.41
tnCNLinkOscMode OSC mode.	Enumerationr/w Enumerated Values: 1 oc3stm1 2 base100FX 3 oneGE 4 base100FX1	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.42
tnCNLinkDHCPDfltGtwy Indicates if default gateway IP address is distributed via DHCP on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.43
tnCNLinkCitAutoStateCtrl false - System is not in auto_state. CIT enable/disable is done by ifAdminStatus. true - System is in auto_state. CIT enable/disable is done by the connectivity status of source_ip. The CIT port will be disabled when…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.44
tnCNLinkAutoStateSourceIP A source IP address that the system shall monitor when tnCNLinkCitAutoStateCtrl is true. This can be the 1350 OMS server address or another IP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.45
tnCNLinkSourceLossCount The number of consecutive retries that tnCNLinkAutoStateSourceIP is un-reachable when tnCNLinkCitAutoStateCtrl is true, which results in CIT port to be auto-enabled. Current configurable range: 5 to 10000.	Unsigned32r/w Constraints: range: 5-10000	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.46
tnCNLinkSourceIPCheckInterval The interval to contact tnCNLinkAutoStateSourceIP when tnCNLinkCitAutoStateCtrl is true. Current configurable range: 10 to 7200.	secondsUnsigned32r/w Constraints: range: 10-7200	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.47
tnCNLinkOspfAuthentType .	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.48
tnCNLinkOspfAuthKey .	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.49
tnCNLinkOspfAuthKeyId .	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.50
tnCNLinkTdmxDcnConf .	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.51
tnCNLinkInetAddressType The value specifies the type of Internet address stored in tnCNLinkInetAddress	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.52
tnCNLinkInetAddress Indicates the IPv6 address of the port	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.53
tnCNLinkPrefixLength Prefix length of the IPV6 of the port	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.54
tnCNLinkAutoStateSourceInetAddressType The value specifies the type of Internet address stored tnCNLinkAutoStateSourceInetAddress	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.55
tnCNLinkAutoStateSourceInetAddress Indicates the IPv6 address	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.56
tnCNLinkDhcpv6Enabled Indicates if DHCP version 6 is enabled on the link. Sets are restricted to the local ethernet port CN link.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.57
tnCNLinkDHCPv6Range DHCP version 6 range. Current configurable range: 0 to 10	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.58
tnCNLinkDHCPClient Indicates if default gateway IP address is distributed via DHCP on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.59
tnCNLinkDHCPv6Client Enable/Disable DHCPv6 client on the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.60
tnCNLinkDHCPClientDfltGtwy Indicates if default gateway IP address is distributed via DHCP Client on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.61
tnCNLinkEtherPortIpV6SLAAC Enable or disable a StateLess Address AutoConfig (SLAAC) client on the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.62
tnCNLinkOspfRetransint Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The value should be longer than the expected round trip delay be…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.63
tnCNLinkOspfv3AdjStateId OSPFv3 Adj state.	TropicOspfAdjacencyStateType Type Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.64
tnCNLinkOspfNeighborRouterIp OSPF Neighbor Router ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.65
tnCNLinkOspfv3NeighborRouterIp OSPFv3 Neighbor Router ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.66
tnCNLinkOspfNeighborIp OSPF Neighbor IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.67
tnCNLinkOspfv3NeighborInetAddress Indicates the IPv6 address of OSPFv3 Neighbor.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.68
tnCNLinkRole Set the role of the port to OAMP (for interconnection towards management system) or AUX (for general purpose interconnection towards other TPS systems). Default: oamp - for LAN1 Default: aux - for LA…	Enumerationr/w Enumerated Values: 0 none 1 oamp 2 aux	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.69
tnCNLinkDHCPServerIPv6SLAAC .	OctetString Constraints: range: 0-2048	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.70
tnCNLinkRouterAdvAutonomousFlag When enabled, indicates that the IPv6 prefix can be used for autonomous stateless address autoconfiguration (SLAAC).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.71
tnCNLinkRouterAdvDefaultLifeTime The lifetime associated with the default router.	secondsUnsigned32r/w Constraints: range: 0-9000	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.72
tnCNLinkRouterAdvDefaultPreference The preference associated with the default router.	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.73
tnCNLinkRouterAdvMaxRtrAdvInterval The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface.	secondsUnsigned32r/w Constraints: range: 10-1800	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.74
tnCNLinkRouterAdvManagedFlag When enabled, hosts use the administered (stateful) DHCPv6 protocol for address autoconfiguration in addition to any addresses autoconfigured using stateless address autoconfiguration (SLAAC).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.75
tnCNLinkRouterAdvOtherConfigFlag When set, hosts use the administered (stateful) protocol for autoconfiguration of other (non-address) information.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.76
tnCNLinkRouterAdvPreferredLifeTime The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain preferred.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.77
tnCNLinkRouterAdvSendAdvertState Configures the administrative state for the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.78
tnCNLinkRouterAdvValidLifeTime The length of time in seconds (relative to the time the packet is sent) that the interface prefix is valid for the purpose of on-link determination.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.79
tnCNLinkAutoStateType Mechanism used for monitoring the connection with an NMS: - neInitiated NE periodically sends ping messages to the NMS. - nmsInitiated An NMS periodically performs an SNMP GET on object SNMPv2-MIB::sysUpTime.	Enumerationr/w Enumerated Values: 1 neInitiated 2 nmsInitiated	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.80
tnCNLinkAutoStateStatus The connection status between NE and NMS. - connected(1): NE and NMS are connected - notConnected(2): NE and NMS are not connected - notApplicable(3): Fixed value to be used when tnCNLinkCitAutoStateCtrl for this…	Enumeration Enumerated Values: 1 connected 2 notConnected 3 notApplicable	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.81
tnCNLinkOspfv3HelloInterval The hello interval of the link. Current configurable range: 1 to 65535.	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.82
tnCNLinkOspfv3TeMetric The Traffic eng metric of the link. Current configurable range: 1 to 65535.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.83
tnCNLinkOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. The value should be longer than the expected round trip dela…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.84
tnCNLinkOspfv3RtrDeadInterval The router dead interval of the link. For 1830, the range is (1..'FFFF'h).	secondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.85
tnCNLinkOspfv3ConfigRtrPriority The router priority of the link.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.86
tnCNLinkOspfv3RoutingState .	NokiaCNLinkOspfRoutingStater/w Type Values: 1 disable 2 enable 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.87
tnCNLinkOspfOscRoutingState .	NokiaCNLinkOspfRoutingStater/w Type Values: 1 disable 2 enable 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.88
tnCNLinkOspfv6OscRoutingState .	NokiaCNLinkOspfRoutingStater/w Type Values: 1 disable 2 enable 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.1.1.1.89

This is a read-only table.  It provides a
secondary way of reading CN Link information.

tnCNLinkViaChannelEntry row .1.3.6.1.4.1.7483.2.3.1.2.1.2.1

The index has a shelf/slot/port/channel
granularity.

Indexes

TROPIC-SHELF-MIBtnShelfIndex TROPIC-SLOT-MIBtnSlotIndex tnPortIndex tnChannelIndex

Column	Syntax	OID
tnPortIndex The port portion of the index of the link.	TROPIC-TCTropicPortIndexType Type Constraints: range: 1..12	.1.3.6.1.4.1.7483.2.3.1.2.1.2.1.1
tnChannelIndex The channel portion of the index of the link.	TROPIC-TCTropicChannelIndexType Type Constraints: range: 1..256	.1.3.6.1.4.1.7483.2.3.1.2.1.2.1.2
tnCNLinkViaChannelIfIndex The interface index of the link, a derived value created by the system.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.3.1.2.1.2.1.3

.

tnL1TrafficParamEntry row .1.3.6.1.4.1.7483.2.3.1.2.2.3.1

.

Indexes

IF-MIBifIndex tnL1TrafficParamPerHopBehaviour

Column	Syntax	OID
tnL1TrafficParamPerHopBehaviour The value of this object identifies the Class of Service.	TROPIC-TCTnPerHopBehaviourType Type Values: 1 ef 2 af1 3 af2 4 be	.1.3.6.1.4.1.7483.2.3.1.2.2.3.1.1
tnL1TrafficParamBookingFactor .	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.2.3.1.2
tnL1TrafficParamMaximumLoad .	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.2.3.1.3
tnL1TrafficParamPMF .	percentageSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.2.3.1.4
tnL1TrafficParamAvailableBandwidth .	Mb/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.2.3.1.5

.

tnIpCidrRouteEntry row .1.3.6.1.4.1.7483.2.3.1.2.4.2.1

.

Indexes

No indexes recorded

Column	Syntax	OID
tnIpCidrRouteWithRedistribution .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.4.2.1.1

The automatic protection switch group table.

tnApsGroupEntry row .1.3.6.1.4.1.7483.2.3.1.2.6.1.1

.

Indexes

tnApsGroupId

Column	Syntax	OID
tnApsGroupId .	TROPIC-TCTnApsGroupId	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.1
tnApsGroupRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.2
tnApsGroupDescr .	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.3
tnApsGroupMode .	TropicProtectionLevelr/w Type Values: 1 unprotected 2 oneForOne 3 onePlusOne 4 onePlusOneOpticalSplitter 5 onePlusOneESNCP 6 onePlusOneOpticalSplitterG8731	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.4
tnApsGroupRevert .	Enumerationr/w Enumerated Values: 1 nonrevertive 2 revertive	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.5
tnApsGroupDirection .	Enumerationr/w Enumerated Values: 1 unidirectional 2 bidirectional 3 uniwoaps	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.6
tnApsGroupExtraTraffic .	TROPIC-TCAluWdmEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.7
tnApsGroupWaitToRestore Current configurable range: 1 to 20.	minutesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.8
tnApsGroupK1K2Rcv .	ApsK1K2 Type Constraints: range: 2	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.9
tnApsGroupK1K2Trans .	ApsK1K2 Type Constraints: range: 2	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.10
tnApsGroupCurrentStatus .	Bits Enumerated Values: 0 modeMismatch 1 channelMismatch 2 psbf 3 feplf 4 extraTraffic	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.11
tnApsGroupModeMismatches .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.12
tnApsGroupChannelMismatches .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.13
tnApsGroupPSBFs .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.14
tnApsGroupFEPLFs .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.15
tnApsGroupSwitchedIfIndex .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.16
tnApsGroupMembers This attribute must be set with the following format: For the 1696R and 1830 PSS-32 single line ported cards: <protChIfIndex>:<workChIfIndex> For the 1830 PSS-1 GBE and MD4H, and 1830 PSS…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.17
tnApsGroupSdEnable Indicates whether or not Signal Degrade is used for protection switching.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.18
tnApsHoldOffTimer Hold Off Time for automatic switching. Current configurable range: 0 to 10000.	milli-secondsUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.7483.2.3.1.2.6.1.1.19

The automatic protection switch group member table.

tnApsMemberEntry row .1.3.6.1.4.1.7483.2.3.1.2.6.2.1

.

Indexes

tnApsGroupId tnApsMemberIfIndex

Column	Syntax	OID
tnApsMemberIfIndex .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.3.1.2.6.2.1.1
tnApsMemberRowStatus Changing the row status is currently not supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.6.2.1.2
tnApsMemberConfigNumber Currently, only the first two values are used: 0 - Protection 1 - Working The rest of values (2..14) are not used.	Integer32r/w Constraints: range: 0-14	.1.3.6.1.4.1.7483.2.3.1.2.6.2.1.3
tnApsMemberSwitch The type of protection switch.	Enumerationr/w Enumerated Values: 1 noCmd 2 clear 3 lockoutOfProtection 4 forcedSwitchWorkToProtect 5 forcedSwitchProtectToWork 6 manualSwitchWorkToProtect 7 manualSwitchProtectToWork 8 exercise	.1.3.6.1.4.1.7483.2.3.1.2.6.2.1.5
tnApsMemberCurrentStatus Current protection status.	Bits Enumerated Values: 0 lockedOut 1 sd 2 sf 3 switched 4 txActive 5 txStandby 6 rxActive 7 rxStandby	.1.3.6.1.4.1.7483.2.3.1.2.6.2.1.7

.

tnPackApsGroupEntry row .1.3.6.1.4.1.7483.2.3.1.2.6.3.1

.

Indexes

tnPackApsGroupID

Column	Syntax	OID
tnPackApsGroupID .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.1
tnPackApsGroupRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.2
tnPackApsGroupWorkIfIndex The interface Index in the working pack.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.3
tnPackApsGroupProtIfIndex The interface Index in the protection pack.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.4
tnPackApsGroupDescr Description for the APS group.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.5
tnPackApsGroupRevert The revertive attribute of the APS group.	Enumerationr/w Enumerated Values: 1 nonrevertive 2 revertive	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.6
tnPackApsGroupDirection The protection direction of the APS Group.Only Unidirection	Enumerationr/w Enumerated Values: 1 unidirectional 2 bidirectional	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.7
tnPackApsGroupWaitToRestore The wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15.	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.8
tnPackApsGroupHoldOffTimer Hold Off Time for automatic switching. Current configurable range: 0 to 10000.	milli-secondsUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.9
tnPackApsGroupSwitchCmd The switch command applied to the APS group.	Enumerationr/w Enumerated Values: 1 noCmd 2 clear 3 lockoutOfProtection 4 forcedSwitchWorkToProtect 5 forcedSwitchProtectToWork 6 manualSwitchWorkToProtect 7 manualSwitchProtectToWork	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.10
tnPackApsGroupActSide Active side in the Pack APS group.	Enumeration Enumerated Values: 1 working 2 protection	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.11
tnPackApsGroupCurrentStatus Currently active switch request for a Pack APS.	Enumeration Enumerated Values: 1 lockoutNe 2 frcdNe 3 sfNe 4 sdNe 5 manNe 6 wtrNe 7 dnr 8 nr 9 lockoutFe 10 frcdFe 11 sfFe 12 sdFe 13 manFe 14 wtrFe 15 exerNe 16 exerFe	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.12
tnPackApsGroupWorkStatus The status of the working pack in the APS group.	Enumeration Enumerated Values: 1 sf 2 sd 3 none	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.13
tnPackApsGroupProtStatus The status of the protection pack in the APS group.	Enumeration Enumerated Values: 1 sf 2 sd 3 none	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.14
tnPackApsGroupPortFailEnable Indicates whether or not Port fail is used for protection switching.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.6.3.1.15

The control network map table.

tnControlNetworkMapEntry row .1.3.6.1.4.1.7483.2.3.1.2.8.1.1

The Control Network map entry. This is the
information on the neighbors of this NE.

Indexes

tnCNMapTableIndex

Column	Syntax	OID
tnCNMapTableIndex The index into the map table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.1
tnCNMapIpAddress The IP address of the node.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.2
tnCNMapNeName The name of the node.	OctetString Constraints: range: 0-81	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.3
tnCNMapSoftwareRelease The software release of the node.	OctetString Constraints: range: 0-81	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.4
tnCNMapIpv6InetAddress Indicates the IPv6 address.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.5
tnCNMapIpv4Address IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.8.1.1.6

The network interface table.

tnNetIfEntry row .1.3.6.1.4.1.7483.2.3.1.2.9.1.1

.

Indexes

tnNetIfIndex

Column	Syntax	OID
tnNetIfIndex Access identifier for the Network Interface Index.	Unsigned32 Constraints: range: 1-512	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.1
tnNetIfTypeOfOperation Create, delete, or modify a network interface instance over an ECC.	TROPIC-TCAluWdmTypeOfNetIfOperationr/w Type Values: 1 empty 2 add 3 modify	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.2
tnNetIfStatus Administrative status of the network interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.3
tnNetIfPacketType GCC packet type, which indicates if the NETIF packet type is standard (std) or non-standard (nonstd). Only provisionable for 4DPA4, 11DPE12, 11STAR1, and 11STMM10 pack related NETIFs. If tnNetIfPacketType is std, tnNe…	Enumerationr/w Enumerated Values: 1 std 2 non-std	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.4
tnNetIfMtu Maximum Transmission Unit size, in units of bytes. This attribute can only be changed if tnNetIfPacketType is std. Current configurable range: 576 to 1500. Default: 1473 for 4DPA4, 11DPE…	Integer32r/w Constraints: range: 576-1500	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.5
tnNetIfHelloInterval Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neighb…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.6
tnNetIfRtrDeadInterval OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down. The dead interval is a timer used to timeout inactive adja…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.7
tnNetIfMetric OSPF Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535. Default: 14 for ODU4/OTU…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.8
tnNetIfOspfAuthentType Specifies OSPF authentication on the interface - only none and MD5 are currently supported.	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.9
tnNetIfOspfAuthKey Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.10
tnNetIfOspfAuthKeyId Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.11
tnNetIfCnLinkAdjState NETIF OSPF adjacency state.	TropicOspfAdjacencyStateType Type Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.12
tnNetIfMtuNeg The actual (negotiated) Maximum Transmission Unit size,in units of bytes with default value -1, when the MTU size has not yet been negotiated. The default value -1 should be interpreted by UIs as '-'.	Integer32 Constraints: range: -1-1500	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13
tnNetIfOSPFAreaNumberId NETIF OSPF area id.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.14
tnNetIfOspfRetransint Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The value should be longer than the expected round trip delay be…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.15
tnNetIfOspfv3AdjStateId OSPFv3 Adj state.	TropicOspfAdjacencyStateType Type Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.16
tnNetIfOspfNeighborRouterIp OSPF Neighbor Router ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.17
tnNetIfOspfv3NeighborRouterIp OSPFv3 Neighbor Router ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.18
tnNetIfOspfNeighborIp OSPF Neighbor IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.19
tnNetIfOspfv3NeighborInetAddress Indicates the IPv6 address of OSPFv3 Neighbor.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.20
tnNetIfIPv6LinkLocalInetAddress Indicates the IPv6 address of Link Local.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.21
tnNetIfLcpEchoInterval NetIf LCP Echo Interval.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.22
tnNetIfLcpEchoFailure NetIf LCP Echo Failure.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.23
tnNetIfOspfStatus NetIf ospf status.	Enumerationr/w Enumerated Values: 1 true 2 false 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.24
tnNetIfOspfv3AreaNumberId NETIF OSPFv3 area id.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.25
tnNetIfOspfv3HelloInterval Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neighb…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.26
tnNetIfOspfv3Metric OSPFv3 Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.27
tnNetIfOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. The value should be longer than the expected round trip dela…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.28
tnNetIfOspfv3RtrDeadInterval OSPFv3 Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPFv3 state is declared down. The dead interval is a timer used to timeout inactive …	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.29
tnNetIfOspfv3ConfigRtrPriority The router priority of the link.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.30
tnNetIfOspfv3Status NetIf ospfv3 status.	Enumerationr/w Enumerated Values: 1 true 2 false 3 redistribute	.1.3.6.1.4.1.7483.2.3.1.2.9.1.1.31

The Network interface facility table.

tnNetIfFacilityEntry row .1.3.6.1.4.1.7483.2.3.1.2.9.2.1

.

Indexes

tnNetIfIndex tnNetIfFacilityIfIndex tnNetIfFacilityIfIndexLo

Column	Syntax	OID
tnNetIfFacilityIfIndex The facility carrying the ECC. The format of the first 32 bits of the 64 index is as follows: 8 8 1 13 2 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.9.2.1.1
tnNetIfFacilityIfIndexLo The facility carrying the ECC. tnNetIfFacilityIfIndex (above) is the first 32 bits of the 64 bit index. The format of the second 32 bit of the index is as follows: 9 3 2 2 4 6 …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.9.2.1.2
tnNetIfFacilityTypeOfOperation Create, delete, or modify the facility information of a network interface instance.	TROPIC-TCAluWdmTypeOfNetIfOperationr/w Type Values: 1 empty 2 add 3 modify	.1.3.6.1.4.1.7483.2.3.1.2.9.2.1.3
tnNetIfFacilityEccChanType Specifies the ECC type of the referred ECC channel. Default: gcc0 if NETIF addresses an OTU gcc1 if NETIF addresses an ODU. Refer to the 1830 PSS R6.0 XCOM RRS for valid values of eccch…	Enumerationr/w Enumerated Values: 1 gcc0 2 gcc1 3 gcc2	.1.3.6.1.4.1.7483.2.3.1.2.9.2.1.4

.

tnStaticRouteEntry row .1.3.6.1.4.1.7483.2.3.1.2.10.1.1

.

Indexes

tnStaticRouteIdentifier tnStaticRouteDestInetAddressType tnStaticRouteDestInetAddress tnStaticRouteMaskPrefix tnStaticRouteTos tnStaticRouteNextHopType tnStaticRouteNextHop

Column	Syntax	OID
tnStaticRouteDestInetAddressType .	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.1
tnStaticRouteDestInetAddress .	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.2
tnStaticRouteMaskPrefix .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.3
tnStaticRouteTos .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.4
tnStaticRouteNextHopType .	Enumeration Enumerated Values: 1 ipv4 2 ipv6 3 netIf 4 ifIndex	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.5
tnStaticRouteNextHop .	OctetString	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.6
tnStaticRouteMetric Determines which route to be entered in the NE routing table when there are multiple identical routes discovered through different routing protocols. Lower values have higher precedence. Note: If a value …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.7
tnStaticRouteWithRedistribution .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.8
tnStaticRouteRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.9
tnStaticRouteIdentifier .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.10
tnStaticRouteWithBgpDistribution .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.10.1.1.11

The Ethernet table.

tnEthIfEntry row .1.3.6.1.4.1.7483.2.3.1.2.11.1.1

.

Indexes

tnEthIfIndex

Column	Syntax	OID
tnEthIfIndex Access identifier for the Ethernet Index.	Unsigned32 Constraints: range: 1-64	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.1
tnEthIfTypeOfOperation .	TROPIC-TCAluWdmTypeOfNetIfOperationr/w Type Values: 1 empty 2 add 3 modify	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.2
tnEthIfStatus Administrative status of the Ethernet.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.3
tnEthIfHelloInterval Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neig…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.4
tnEthIfRtrDeadInterval OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down. The dead interval is a timer used to timeout inactive adj…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.5
tnEthIfMetric OSPF metric or cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.6
tnEthIfOspfAuthentType Specifies OSPF authentication on the interface - only none and MD5 are currently supported.	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.7
tnEthIfOspfAuthKey Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.8
tnEthIfOspfAuthKeyId Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.9
tnEthIfOSPFAreaNumberId ETHIF OSPF area id.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.10
tnEthIfProxyArp .	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.11
tnEthIfOspfRouteState Specifies the OSPF routing state of the ETHIF interface.	Enumerationr/w Enumerated Values: 1 noDynamicRouting 2 redistribute 3 oSPF	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.12
tnEthIfDhcpEnabled .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.13
tnEthIfDHCPRange DHCP range. Current configurable range: 0 to 10.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.14
tnEthIfDHCPDfltGtwy .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.15
tnEthIfDhcpv6Enabled .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.16
tnEthIfDHCPv6Range DHCP version 6 range. Current configurable range: 0 to 10.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.17
tnEthIfDHCPClient Indicates if default gateway IP address is distributed via DHCP on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.18
tnEthIfDHCPClientDfltGtwy Indicates if default gateway IP address is distributed via DHCP Client on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.19
tnEthIfIpV6SLAAC Enable or disable a StateLess Address AutoConfig (SLAAC).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.20
tnEthIfIpAddress .	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.21
tnEthIfSubnetMask .	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.22
tnEthIfInetAddressType .	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.23
tnEthIfInetAddress Indicates the IPv6 address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.24
tnEthIfPrefixLength Prefix length of the IPV6	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.25
tnEthIfDescription Ethif Description.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.26
tnEthIfOspfAdjStateId Specifies OSPF adj state	Enumeration Enumerated Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.27
tnEthIfOspfDrPriorityId .	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.28
tnEthIfOspfRetransint Specifies the length of time, in seconds, that OSPF will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. The value should be longer than the expected round trip delay bet…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.29
tnEthIfOspfv3AdjStateId OSPFv3 Adj state.	TropicOspfAdjacencyStateType Type Values: 1 down 2 init 3 twoWay 4 exchangeStart 5 exchange 6 loading 7 full	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.30
tnEthIfOperStatus The Operational status of the IBM link.	TropicLinkOperationalStateType Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.31
tnEthIfAlmProfName Alarm profile for IBM link.	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.32
tnEthIfDHCPServerIPv6SLAAC .	OctetString Constraints: range: 0-2048	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.33
tnEthIfRouterAdvAutonomousFlag When enabled, indicates that the interface prefix can be used for autonomous stateless address configuration.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.34
tnEthIfRouterAdvDefaultLifeTime The lifetime associated with the default router.	secondsUnsigned32r/w Constraints: range: 0-9000	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.35
tnEthIfRouterAdvDefaultPreference The preference associated with the default router.	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.36
tnEthIfRouterAdvMaxRtrAdvInterval The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface.	secondsUnsigned32r/w Constraints: range: 10-1800	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.37
tnEthIfRouterAdvManagedFlag When enabled, hosts use the administered (stateful) protocol for address autoconfiguration in addition to any addresses autoconfigured using stateless address autoconfiguration (SLAAC).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.38
tnEthIfRouterAdvOtherConfigFlag When set, hosts use the administered (stateful) protocol for autoconfiguration of other (non-address) information.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.39
tnEthIfRouterAdvPreferredLifeTime The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain preferred.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.40
tnEthIfRouterAdvSendAdvertState Set administrative status of the ETHIF interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.41
tnEthIfRouterAdvValidLifeTime The length of time in seconds (relative to the time the packet is sent) that the interface prefix is valid for the purpose of on-link determination.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.42
tnEthIfOspfv3AreaNumberId ETHIF OSPFv3 area id.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.43
tnEthIfOspfv3HelloInterval Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neig…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.44
tnEthIfOspfv3Metric OSPFv3 metric or cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.45
tnEthIfOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will wait before retransmitting an unacknowledged link state advertisement (LSA) to an OSPFv3 neighbor. The value should be longer than the expected round trip delay…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.46
tnEthIfOspfv3RtrDeadInterval OSPFv3 Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPFv3 state is declared down. The dead interval is a timer used to timeout inactive…	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.47
tnEthIfOspfv3DrPriorityId .	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.48
tnEthIfOspfv3RouteState Specifies the OSPFv3 routing state of the ETHIF interface.	Enumerationr/w Enumerated Values: 1 noDynamicRouting 2 redistribute 3 oSPF	.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.49

The Ethernet Interface table.

tnEthIfInterfaceEntry row .1.3.6.1.4.1.7483.2.3.1.2.11.2.1

.

Indexes

tnEthIfIndex tnEthIfInterfaceIfIndex

Column	Syntax	OID
tnEthIfInterfaceIfIndex .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.3.1.2.11.2.1.1
tnEthIfInterfaceVlanId .	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.7483.2.3.1.2.11.2.1.2
tnEthIfInterfaceTypeOfOperation .	TROPIC-TCAluWdmTypeOfNetIfOperationr/w Type Values: 1 empty 2 add 3 modify	.1.3.6.1.4.1.7483.2.3.1.2.11.2.1.3

The Dhcp Relay Table.

tnDhcpRelayRecordEntry row .1.3.6.1.4.1.7483.2.3.1.2.12.1.1

.

Indexes

tnDhcpRelayRecordIndex1 tnDhcpRelayRecordIndex2 tnDhcpRelayRecordInetAddressType tnDhcpRelayRecordInetAddress

Column	Syntax	OID
tnDhcpRelayRecordIndex1 .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.1
tnDhcpRelayRecordIndex2 .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.2
tnDhcpRelayRecordInetAddressType The value specifies the type of Internet address stored in tnDhcpRelayRecordInetAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.3
tnDhcpRelayRecordInetAddress Indicates the IPv6 address of the port.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.4
tnDhcpRelayRecordRowStatus Currently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.5
tnDhcpRelayRecordRailIdDescr .	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.7483.2.3.1.2.12.1.1.6

The Dhcp Server Table.

tnDhcpServerEntry row .1.3.6.1.4.1.7483.2.3.1.2.13.1.1

.

Indexes

tnDhcpServerInetAddressType tnDhcpServerInetAddress

Column	Syntax	OID
tnDhcpServerInetAddressType The address type of tnDhcpServerInetAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.1
tnDhcpServerInetAddress The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to be aware that if the size of ipAddressAddr ex…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.2
tnDhcpServerSerialno Serial number of system which wants to get IP address via DHCP	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.3
tnDhcpServerMacAddress {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - 6-byte unicast MAC address of the remote ethman port,where xx are hexadecimal numbers.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.4
tnDhcpServerPort Serial number of system which wants to get IP address via DHCP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.5
tnDhcpServerRowStatus Currently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.3.1.2.13.1.1.6