tnEthIfRtrDeadInterval
TROPIC-L1SERVICE-MIB ·
.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.5
Object
column
r/w
seconds Unsigned32
OSPF Router Dead Interval of the interface. This is the
time elapsed between not hearing a router's Hello PDU
before the interface OSPF state is declared down. The
dead interval is a timer used to timeout inactive
adjacencies. The dead interval value should always be
greater than the hello interval value. By default, the
interface shall be set to four times the value of the
HELLOINT, so the default is 40 seconds.
Current configurable range: 1 to 65535.
Context
- MIB
- TROPIC-L1SERVICE-MIB
- OID
.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tnEthIfEntry
- Table
- tnEthIfTable
- Siblings
- 48
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnEthIfIndex Access identifier for the Ethernet Index. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.1 |
| tnEthIfOSPFAreaNumberId ETHIF OSPF area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.10 |
| tnEthIfProxyArp . | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.11 |
| tnEthIfOspfRouteState Specifies the OSPF routing state of the ETHIF interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.12 |
| tnEthIfDhcpEnabled . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.13 |
| tnEthIfDHCPRange DHCP range.
Current configurable range: 0 to 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.14 |
| tnEthIfDHCPDfltGtwy . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.15 |
| tnEthIfDhcpv6Enabled . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.16 |
| tnEthIfDHCPv6Range DHCP version 6 range.
Current configurable range: 0 to 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.17 |
| tnEthIfDHCPClient Indicates if default gateway IP address is distributed
via DHCP on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.18 |
| tnEthIfDHCPClientDfltGtwy Indicates if default gateway IP address is distributed
via DHCP Client on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.19 |
| tnEthIfTypeOfOperation . | column | TROPIC-TCAluWdmTypeOfNetIfOperation | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.2 |
| tnEthIfIpV6SLAAC Enable or disable a StateLess Address AutoConfig (SLAAC). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.20 |
| tnEthIfIpAddress . | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.21 |
| tnEthIfSubnetMask . | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.22 |
| tnEthIfInetAddressType . | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.23 |
| tnEthIfInetAddress Indicates the IPv6 address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.24 |
| tnEthIfPrefixLength Prefix length of the IPV6 | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.25 |
| tnEthIfDescription Ethif Description. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.26 |
| tnEthIfOspfAdjStateId Specifies OSPF adj state | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.27 |
| tnEthIfOspfDrPriorityId . | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.28 |
| tnEthIfOspfRetransint Specifies the length of time, in seconds, that OSPF will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPF neighbor. The value should
be longe… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.29 |
| tnEthIfStatus Administrative status of the Ethernet. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.3 |
| tnEthIfOspfv3AdjStateId OSPFv3 Adj state. | column | TropicOspfAdjacencyStateType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.30 |
| tnEthIfOperStatus The Operational status of the IBM link. | column | TropicLinkOperationalStateType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.31 |
| tnEthIfAlmProfName Alarm profile for IBM link. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.32 |
| tnEthIfDHCPServerIPv6SLAAC . | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.33 |
| tnEthIfRouterAdvAutonomousFlag When enabled, indicates that the interface prefix can
be used for autonomous stateless address configuration. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.34 |
| tnEthIfRouterAdvDefaultLifeTime The lifetime associated with the default router. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.35 |
| tnEthIfRouterAdvDefaultPreference The preference associated with the default router. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.36 |
| tnEthIfRouterAdvMaxRtrAdvInterval The maximum time allowed between sending unsolicited
multicast Router Advertisements from the interface. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.37 |
| tnEthIfRouterAdvManagedFlag When enabled, hosts use the administered (stateful)
protocol for address autoconfiguration in addition to
any addresses autoconfigured using stateless address
autoconfiguration (S… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.38 |
| tnEthIfRouterAdvOtherConfigFlag When set, hosts use the administered (stateful) protocol
for autoconfiguration of other (non-address) information. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.39 |
| tnEthIfHelloInterval Specifies the hello interval for the interface. The
Hello interval specifies how often (in seconds) a hello
packet is sent out on the interface. Hello packets are
used to establ… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.4 |
| tnEthIfRouterAdvPreferredLifeTime The length of time in seconds (relative to the time the
packet is sent) that addresses generated from the prefix
via stateless address autoconfiguration remain preferred. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.40 |
| tnEthIfRouterAdvSendAdvertState Set administrative status of the ETHIF interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.41 |
| tnEthIfRouterAdvValidLifeTime The length of time in seconds (relative to the time the
packet is sent) that the interface prefix is valid for
the purpose of on-link determination. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.42 |
| tnEthIfOspfv3AreaNumberId ETHIF OSPFv3 area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.43 |
| tnEthIfOspfv3HelloInterval Specifies the hello interval for the interface. The
Hello interval specifies how often (in seconds) a hello
packet is sent out on the interface. Hello packets are
used to establ… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.44 |
| tnEthIfOspfv3Metric OSPFv3 metric or cost of the interface. The lower the cost,
the more preferred the interface is for the routing of
packets.
Current configurable range: 1 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.45 |
| tnEthIfOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPFv3 neighbor. The value should
be l… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.46 |
| tnEthIfOspfv3RtrDeadInterval OSPFv3 Router Dead Interval of the interface. This is the
time elapsed between not hearing a router's Hello PDU
before the interface OSPFv3 state is declared down. The
dead inte… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.47 |
| tnEthIfOspfv3DrPriorityId . | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.48 |
| tnEthIfOspfv3RouteState Specifies the OSPFv3 routing state of the ETHIF interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.49 |
| tnEthIfMetric OSPF metric or cost of the interface. The lower the cost,
the more preferred the interface is for the routing of
packets.
Current configurable range: 1 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.6 |
| tnEthIfOspfAuthentType Specifies OSPF authentication on the interface - only
none and MD5 are currently supported. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.7 |
| tnEthIfOspfAuthKey Key used for OSPF MD5 128 bit hash value key calculation
on the interface. The string shall be 0 to 16 uppercase
or lowercase alphanumeric
characters. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.8 |
| tnEthIfOspfAuthKeyId Key used for OSPF MD5 128 bit hash value key calculation
on the interface.
Current configurable range: 1 to 255. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.9 |