tnEthIfOspfv3HelloInterval
TROPIC-L1SERVICE-MIB ·
.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.44
Object
column
r/w
seconds Unsigned32
Specifies the hello interval for the interface. The
Hello interval specifies how often (in seconds) a hello
packet is sent out on the interface. Hello packets are
used to establish and maintain relationships with
neighboring network elements.
Current configurable range: 1 to 65535.
Context
- MIB
- TROPIC-L1SERVICE-MIB
- OID
.1.3.6.1.4.1.7483.2.3.1.2.11.1.1.44- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tnEthIfEntry
- Table
- tnEthIfTable
- Siblings
- 48
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnEthIfIndex Access identifier for the Ethernet Index. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.1 |
| tnEthIfOSPFAreaNumberId ETHIF OSPF area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.10 |
| tnEthIfProxyArp . | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.11 |
| tnEthIfOspfRouteState Specifies the OSPF routing state of the ETHIF interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.12 |
| tnEthIfDhcpEnabled . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.13 |
| tnEthIfDHCPRange DHCP range.
Current configurable range: 0 to 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.14 |
| tnEthIfDHCPDfltGtwy . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.15 |
| tnEthIfDhcpv6Enabled . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.16 |
| tnEthIfDHCPv6Range DHCP version 6 range.
Current configurable range: 0 to 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.17 |
| tnEthIfDHCPClient Indicates if default gateway IP address is distributed
via DHCP on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.18 |
| tnEthIfDHCPClientDfltGtwy Indicates if default gateway IP address is distributed
via DHCP Client on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.19 |
| tnEthIfTypeOfOperation . | column | TROPIC-TCAluWdmTypeOfNetIfOperation | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.2 |
| tnEthIfIpV6SLAAC Enable or disable a StateLess Address AutoConfig (SLAAC). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.20 |
| tnEthIfIpAddress . | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.21 |
| tnEthIfSubnetMask . | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.22 |
| tnEthIfInetAddressType . | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.23 |
| tnEthIfInetAddress Indicates the IPv6 address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.24 |
| tnEthIfPrefixLength Prefix length of the IPV6 | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.25 |
| tnEthIfDescription Ethif Description. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.26 |
| tnEthIfOspfAdjStateId Specifies OSPF adj state | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.27 |
| tnEthIfOspfDrPriorityId . | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.28 |
| tnEthIfOspfRetransint Specifies the length of time, in seconds, that OSPF will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPF neighbor. The value should
be longe… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.29 |
| tnEthIfStatus Administrative status of the Ethernet. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.3 |
| tnEthIfOspfv3AdjStateId OSPFv3 Adj state. | column | TropicOspfAdjacencyStateType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.30 |
| tnEthIfOperStatus The Operational status of the IBM link. | column | TropicLinkOperationalStateType | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.31 |
| tnEthIfAlmProfName Alarm profile for IBM link. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.32 |
| tnEthIfDHCPServerIPv6SLAAC . | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.33 |
| tnEthIfRouterAdvAutonomousFlag When enabled, indicates that the interface prefix can
be used for autonomous stateless address configuration. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.34 |
| tnEthIfRouterAdvDefaultLifeTime The lifetime associated with the default router. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.35 |
| tnEthIfRouterAdvDefaultPreference The preference associated with the default router. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.36 |
| tnEthIfRouterAdvMaxRtrAdvInterval The maximum time allowed between sending unsolicited
multicast Router Advertisements from the interface. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.37 |
| tnEthIfRouterAdvManagedFlag When enabled, hosts use the administered (stateful)
protocol for address autoconfiguration in addition to
any addresses autoconfigured using stateless address
autoconfiguration (S… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.38 |
| tnEthIfRouterAdvOtherConfigFlag When set, hosts use the administered (stateful) protocol
for autoconfiguration of other (non-address) information. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.39 |
| tnEthIfHelloInterval Specifies the hello interval for the interface. The
Hello interval specifies how often (in seconds) a hello
packet is sent out on the interface. Hello packets are
used to establ… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.4 |
| tnEthIfRouterAdvPreferredLifeTime The length of time in seconds (relative to the time the
packet is sent) that addresses generated from the prefix
via stateless address autoconfiguration remain preferred. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.40 |
| tnEthIfRouterAdvSendAdvertState Set administrative status of the ETHIF interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.41 |
| tnEthIfRouterAdvValidLifeTime The length of time in seconds (relative to the time the
packet is sent) that the interface prefix is valid for
the purpose of on-link determination. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.42 |
| tnEthIfOspfv3AreaNumberId ETHIF OSPFv3 area id. | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.43 |
| tnEthIfOspfv3Metric OSPFv3 metric or cost of the interface. The lower the cost,
the more preferred the interface is for the routing of
packets.
Current configurable range: 1 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.45 |
| tnEthIfOspfv3Retransint Specifies the length of time, in seconds, that OSPFv3 will
wait before retransmitting an unacknowledged link state
advertisement (LSA) to an OSPFv3 neighbor. The value should
be l… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.46 |
| tnEthIfOspfv3RtrDeadInterval OSPFv3 Router Dead Interval of the interface. This is the
time elapsed between not hearing a router's Hello PDU
before the interface OSPFv3 state is declared down. The
dead inte… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.47 |
| tnEthIfOspfv3DrPriorityId . | column | Integer32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.48 |
| tnEthIfOspfv3RouteState Specifies the OSPFv3 routing state of the ETHIF interface. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.49 |
| tnEthIfRtrDeadInterval OSPF Router Dead Interval of the interface. This is the
time elapsed between not hearing a router's Hello PDU
before the interface OSPF state is declared down. The
dead interval… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.5 |
| tnEthIfMetric OSPF metric or cost of the interface. The lower the cost,
the more preferred the interface is for the routing of
packets.
Current configurable range: 1 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.6 |
| tnEthIfOspfAuthentType Specifies OSPF authentication on the interface - only
none and MD5 are currently supported. | column | Enumeration | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.7 |
| tnEthIfOspfAuthKey Key used for OSPF MD5 128 bit hash value key calculation
on the interface. The string shall be 0 to 16 uppercase
or lowercase alphanumeric
characters. | column | OctetString | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.8 |
| tnEthIfOspfAuthKeyId Key used for OSPF MD5 128 bit hash value key calculation
on the interface.
Current configurable range: 1 to 255. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.3.1.2.11.1.1.9 |