tnAmplifierPortSRSTiltACoeffDCM
TROPIC-AMPLIFIER-MIB ·
.1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13
Object
Modeling coefficient for the
SRSTilt = A*Pout(mW) equation, for DCM.
Current configurable range: 0 to 10000.
Context
- MIB
- TROPIC-AMPLIFIER-MIB
- OID
.1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnAmplifierPortConfigEntry
- Table
- tnAmplifierPortConfigTable
- Siblings
- 47
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnAmplifierPortPowerGain The following description applies to the signal
port of the amplifier card:
Current configurable ranges and defaults:
A2325A: (1600..3200),… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.1 |
| tnAmplifierPortTargetTilt The following description applies to the signal
port of the amplifier card:
EPT - Tilt.
Configurable ranges and defaults:
A2325A: (-3… | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.10 |
| tnAmplifierPortFunction Indicates the functional type of the amplifier
card. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.11 |
| tnAmplifierPortAprDisable The Auto Power Recovery Disable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.12 |
| tnAmplifierPortMaxFlatGainOffset Provides a correction to the assumed max flat
gain value.
Current configurable range: -500 to 500. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.14 |
| tnAmplifierPortGainTilt Current OA tilt setting for the signal port of
the amplifier card.
Current ranges:
AM2625A: -600 to -100
AM2032A: -300 to 0
ASWG: -400 to 400
A4PS… | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.15 |
| tnAmplifierPortAprHoldOffTime The auto power recovery hold off time. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.16 |
| tnAmplifierPortLosMode The Amplifier Port LOS Mode. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.17 |
| tnAmplifierPortSignalFailThreshold Integer range 4 to 5, representing 10**4 to 10**5.
Current configurable range: 4 to 5. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.18 |
| tnAmplifierPortSignalDegradeThreshold Integer range 5 to 9, representing 10**5 to 10**9.
Current configurable range: 5 to 9. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.19 |
| tnAmplifierPortPowerGainMin The following description applies to the signal
port of the amplifier card:
This value is used by power management.
Current configurable ranges and d… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.2 |
| tnAmplifierPortVoaSet The following description applies to the
LINEOUT port of the uni-directionalamplifier
card:
Current configurable range: 0 to 1800. | column | mBm SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.20 |
| tnAmplifierPortGainRange Gain range for ASWG/A4PSWG cards. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.21 |
| tnAmplifierPortAprMode APR Mode for ASWG/A4PSWG cards. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.22 |
| tnAmplifierPortOperatingMode ASE Mode for ASWG/A4PSWG cards.
Set to power (node sets LD to LOSN as well)
Set to gain (node sets LD to LOSA as well). | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.23 |
| tnAmplifierPortSignalPowerTarget Value used when tnAmplifierPortOperatingMode
is in power mode.
Current configurable range: -400 to 1000. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.24 |
| tnAmplifierPortPowerGainL Specifies the amplifier gain. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.25 |
| tnAmplifierPortPowerGainMinL Specifies the minimum EDFA gain. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.26 |
| tnAmplifierPortPowerGainMaxL Specifies the maximum EDFA gain. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.27 |
| tnAmplifierPortPowerDeltaMaxL Specifies the maximum allowed difference between the
provisioned gain and the measured gain before an
alarm is raised. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.28 |
| tnAmplifierPortGainRangeL Specifies the EDFA gain range.. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.29 |
| tnAmplifierPortPowerGainMax The following description applies to the signal
port of the amplifier card:
This value is used by power management.
Current configurable ranges and d… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.3 |
| tnAmplifierPortTargetTiltL Specifies the amplifier tilt value used by the system. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.30 |
| tnAmplifierPortVoaSetL Specifies the output VOA setting. | column | mBm SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.31 |
| tnAmplifierPortGainTiltL Current OA tilt setting for the signal port of
the amplifier card for L band. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.32 |
| tnAmplifierPortPowerGainBackoffL The following description applies to the signal
port of the amplifier card for L band:
The adjustment made to min/max gain by power
management when commissioning.
… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.33 |
| tnAmplifierPortPowerSpanRepairMarginL The following description applies to the signal
port of the amplifier card for L Band:
EPT - splice margin.
This is calculated as the absolute value … | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.34 |
| tnAmplifierPortOperatingModeL ASE Mode for ASWG/A4PSWG cards for L-Band.
Set to power (node sets LD to LOSN as well)
Set to gain (node sets LD to LOSA as well). | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.35 |
| tnAmplifierPortSignalPowerTargetL Value used when tnAmplifierPortOperatingModeL
is in power mode for L-Band.
Current configurable range: -400 to 1000. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.36 |
| tnAmplifierPortUserSelectedExteriorDcmPresentIn Manage external DCM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.37 |
| tnAmplifierPortUserSelectedExteriorDcmPresentOut Manage external DCM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.38 |
| tnAmplifierPortBandMode This attribute determines if the LD is operating
in a single or dual band. If in a single band mode,
only the provisioned band attributes are made availabe
to provision and retr… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.39 |
| tnAmplifierPortPowerGainBackoff The following description applies to the signal
port of the amplifier card:
The adjustment made to min/max gain by power
management when commissioning.
… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.4 |
| tnAmplifierPortLosModeL The Amplifier Port LOS Mode in L band. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.40 |
| tnAmplifierPortBoosterTargetPowerIn Target Power Per Channel.
Current configurable range: -500 to 600. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.41 |
| tnAmplifierPortAprEDFApulse APR EDFA Pulsing. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.42 |
| tnAmplifierPortLineDcmConnAddress . | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.43 |
| tnAmplifierPortAPREDFAPulseAttempt APR pulse attempt. | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.44 |
| tnAmplifierPortSpanLossTh Span loss threshold . | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.45 |
| tnAmplifierPortAsellLink . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.46 |
| tnAmplifierPortTargetPowerWidth . | column | TROPIC-TCNokiaAmpPortTargetPowerWidth | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.47 |
| tnAmplifierPortTargetPowerWidthL . | column | TROPIC-TCNokiaAmpPortTargetPowerWidth | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.48 |
| tnAmplifierPortAsellLinkL . | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.49 |
| tnAmplifierPortEnable The following description applies to the signal
port of the amplifier card:
This attribute allows a network operator to kick
start the laser. Setting a value of fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.5 |
| tnAmplifierPortAutoReEnableMode The following description applies to the
ampOutThruIn port of the amplifier card:
Auto re-enable mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.6 |
| tnAmplifierPortPowerSpanRepairMargin The following description applies to the signal
port of the amplifier card:
EPT - splice margin.
This is calculated as the absolute value of the
diff… | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.8 |
| tnAmplifierPortPowerDeltaMax The following description applies to the signal
port of the amplifier card:
EPT - delta max.
Current configurable range: 0 to 500. | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.9 |