TROPIC-AMPLIFIER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
139

tnAmplifierPortConfigTable

table
.1.3.6.1.4.1.7483.2.2.3.7.4.2 · 1 row entry · 48 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierPortConfigTable' 
The provisioned ports on an amplifier card.
tnAmplifierPortConfigEntry row .1.3.6.1.4.1.7483.2.2.3.7.4.2.1
.
Indexes
Column Syntax OID
tnAmplifierPortPowerGain
The following description applies to the signal
port of the amplifier card:

Current configurable ranges and defaults:

A2325A: (1600..3200), 1600
A2P2125 (port 1): ( 200..2000), 10…
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.1
tnAmplifierPortPowerGainMin
The following description applies to the signal
port of the amplifier card:

This value is used by power management.

Current configurable ranges and defaults:

A2325A: …
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.2
tnAmplifierPortPowerGainMax
The following description applies to the signal
port of the amplifier card:

This value is used by power management.

Current configurable ranges and defaults:

A2325A: …
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.3
tnAmplifierPortPowerGainBackoff
The following description applies to the signal
port of the amplifier card:

The adjustment made to min/max gain by power
management when commissioning.

Current configurable range: 0 to 1000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.4
tnAmplifierPortEnable
The following description applies to the signal
port of the amplifier card:

This attribute allows a network operator to kick
start the laser. Setting a value of false is
restricted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.5
tnAmplifierPortAutoReEnableMode
The following description applies to the
ampOutThruIn port of the amplifier card:

Auto re-enable mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.6
tnAmplifierPortPowerSpanRepairMargin
The following description applies to the signal
port of the amplifier card:

EPT - splice margin.

This is calculated as the absolute value of the
difference between tnAmplifierPortPowerGainM…
mBSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.8
tnAmplifierPortPowerDeltaMax
The following description applies to the signal
port of the amplifier card:

EPT - delta max.

Current configurable range: 0 to 500.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.9
tnAmplifierPortTargetTilt
The following description applies to the signal
port of the amplifier card:

EPT - Tilt.

Configurable ranges and defaults:

A2325A: (-300.. 0), 0
A2P2125: (-300.. 300), …
mBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.10
tnAmplifierPortFunction
Indicates the functional type of the amplifier
card.
Enumeration
Enumerated Values:
1ingress
2egress
3other
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.11
tnAmplifierPortAprDisable
The Auto Power Recovery Disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.12
tnAmplifierPortSRSTiltACoeffDCM
Modeling coefficient for the
SRSTilt = A*Pout(mW) equation, for DCM.

Current configurable range: 0 to 10000.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13
tnAmplifierPortMaxFlatGainOffset
Provides a correction to the assumed max flat
gain value.

Current configurable range: -500 to 500.
mBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.14
tnAmplifierPortGainTilt
Current OA tilt setting for the signal port of
the amplifier card.

Current ranges:

AM2625A: -600 to -100
AM2032A: -300 to 0
ASWG: -400 to 400
A4PSWG: -400 to 400.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.15
tnAmplifierPortAprHoldOffTime
The auto power recovery hold off time.
Enumerationr/w
Enumerated Values:
1time0ms
4time250ms
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.16
tnAmplifierPortLosMode
The Amplifier Port LOS Mode.
Enumerationr/w
Enumerated Values:
1auto
2losn
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.17
tnAmplifierPortSignalFailThreshold
Integer range 4 to 5, representing 10**4 to 10**5.

Current configurable range: 4 to 5.
Unsigned32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.18
tnAmplifierPortSignalDegradeThreshold
Integer range 5 to 9, representing 10**5 to 10**9.

Current configurable range: 5 to 9.
Unsigned32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.19
tnAmplifierPortVoaSet
The following description applies to the
LINEOUT port of the uni-directionalamplifier
card:

Current configurable range: 0 to 1800.
mBmSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.20
tnAmplifierPortGainRange
Gain range for ASWG/A4PSWG cards.
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.21
tnAmplifierPortAprMode
APR Mode for ASWG/A4PSWG cards.
Enumerationr/w
Enumerated Values:
1auto
2force
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.22
tnAmplifierPortOperatingMode
ASE Mode for ASWG/A4PSWG cards.

Set to power (node sets LD to LOSN as well)
Set to gain (node sets LD to LOSA as well).
Enumerationr/w
Enumerated Values:
1gain
2power
3maxPower
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.23
tnAmplifierPortSignalPowerTarget
Value used when tnAmplifierPortOperatingMode
is in power mode.

Current configurable range: -400 to 1000.
mBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.24
tnAmplifierPortPowerGainL
Specifies the amplifier gain.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.25
tnAmplifierPortPowerGainMinL
Specifies the minimum EDFA gain.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.26
tnAmplifierPortPowerGainMaxL
Specifies the maximum EDFA gain.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.27
tnAmplifierPortPowerDeltaMaxL
Specifies the maximum allowed difference between the
provisioned gain and the measured gain before an
alarm is raised.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.28
tnAmplifierPortGainRangeL
Specifies the EDFA gain range..
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.29
tnAmplifierPortTargetTiltL
Specifies the amplifier tilt value used by the system.
mBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.30
tnAmplifierPortVoaSetL
Specifies the output VOA setting.
mBmSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.31
tnAmplifierPortGainTiltL
Current OA tilt setting for the signal port of
the amplifier card for L band.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.32
tnAmplifierPortPowerGainBackoffL
The following description applies to the signal
port of the amplifier card for L band:

The adjustment made to min/max gain by power
management when commissioning.

Current configurable range…
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.33
tnAmplifierPortPowerSpanRepairMarginL
The following description applies to the signal
port of the amplifier card for L Band:

EPT - splice margin.

This is calculated as the absolute value of the
difference between tnAmplifierPor…
mBSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.34
tnAmplifierPortOperatingModeL
ASE Mode for ASWG/A4PSWG cards for L-Band.

Set to power (node sets LD to LOSN as well)
Set to gain (node sets LD to LOSA as well).
Enumerationr/w
Enumerated Values:
1gain
2power
3maxPower
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.35
tnAmplifierPortSignalPowerTargetL
Value used when tnAmplifierPortOperatingModeL
is in power mode for L-Band.

Current configurable range: -400 to 1000.
mBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.36
tnAmplifierPortUserSelectedExteriorDcmPresentIn
Manage external DCM.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.37
tnAmplifierPortUserSelectedExteriorDcmPresentOut
Manage external DCM.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.38
tnAmplifierPortBandMode
This attribute determines if the LD is operating
in a single or dual band. If in a single band mode,
only the provisioned band attributes are made availabe
to provision and retrieve.
Enumerationr/w
Enumerated Values:
1cBand
2lBand
3clBand
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.39
tnAmplifierPortLosModeL
The Amplifier Port LOS Mode in L band.
Enumerationr/w
Enumerated Values:
1auto
2losn
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.40
tnAmplifierPortBoosterTargetPowerIn
Target Power Per Channel.

Current configurable range: -500 to 600.
mBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.41
tnAmplifierPortAprEDFApulse
APR EDFA Pulsing.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.42
tnAmplifierPortLineDcmConnAddress
.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.43
tnAmplifierPortAPREDFAPulseAttempt
APR pulse attempt.
TROPIC-TCTnCommandr/w
Type Values:
1noCmd
2execute
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.44
tnAmplifierPortSpanLossTh
Span loss threshold .
mBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.45
tnAmplifierPortAsellLink
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.46
tnAmplifierPortTargetPowerWidth
.
TROPIC-TCNokiaAmpPortTargetPowerWidthr/w
Type Values:
1channelWidth0GHz
2channelWidth6Pt25GHz
3channelWidth12Pt5GHz
4channelWidth25GHz
5channelWidth37Pt5GHz
6channelWidth50GHz
7channelWidth62Pt5GHz
8channelWidth75GHz
9channelWidth87Pt5GHz
10channelWidth100GHz
11channelWidth112Pt5GHz
12channelWidth125GHz
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.47
tnAmplifierPortTargetPowerWidthL
.
TROPIC-TCNokiaAmpPortTargetPowerWidthr/w
Type Values:
1channelWidth0GHz
2channelWidth6Pt25GHz
3channelWidth12Pt5GHz
4channelWidth25GHz
5channelWidth37Pt5GHz
6channelWidth50GHz
7channelWidth62Pt5GHz
8channelWidth75GHz
9channelWidth87Pt5GHz
10channelWidth100GHz
11channelWidth112Pt5GHz
12channelWidth125GHz
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.48
tnAmplifierPortAsellLinkL
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.4.2.1.49

tnAmplifierHybridPortConfigTable

table
.1.3.6.1.4.1.7483.2.2.3.7.4.4 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierHybridPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierHybridPortConfigTable' 
The provisioned ports on an hybrid amplifier
card.
tnAmplifierHybridPortConfigEntry row .1.3.6.1.4.1.7483.2.2.3.7.4.4.1
.
Indexes
Column Syntax OID
tnAmplifierHybridPortVoaAttenuation
Hybrid amplifier port VOA attenuation.

Current configurable range: 0 to 2000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.4.1.1
tnAmplifierHybridPortInitialMidLoss
Hybrid amplifier port initial VOA attenuation.

Current configurable range: 0 to 2000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.4.1.2
tnAmplifierHybridPortInitialAgcTargetGain
Hybrid amplifier port initial AGC target gain.

Current configurable range: 200 to 2000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.4.1.3
tnAmplifierHybridPortVoaMinAttenuation
Hybrid amplifier port VOA minimum attenuation.

Current configurable range: 0 to 2000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.4.1.4
tnAmplifierHybridPortVoaMaxAttenuation
Hybrid amplifier port VOA maximum attenuation.

Current configurable range: 0 to 2000.
mBSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.4.4.1.5

tnAmplifierPortInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.5.2 · 1 row entry · 28 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierPortInfoTable' 
The equipped ports on an amplifier card.
tnAmplifierPortInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.5.2.1
.
Indexes
Column Syntax OID
tnAmplifierPortInternalAmpModuleTemperature
The following description applies to the
signal port of the amplifier card:

The temperature of the laser.

Current range: -5 to 35.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.1
tnAmplifierPortPowerIn
The following description applies to the
fromDcm and line ports of the amplifier card:

The total input power
Current ranges:
ASWG: -9900, -3600 to 1700
A4PSWG: -9900, -3600 to 1700.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.2
tnAmplifierPortPowerOut
The following description applies to the
signal and toDcm ports of the amplifier card:

The total output power.

Current ranges:

AM2625A: -9900, -900 to 2900
AM2032A: -9900, -3…
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.3
tnAmplifierPortSignalPowerOut
The following description applies to the
signal port of the amplifier card:

The total input power plus the programmed gain.

Current Ranges:
ASWG: -9900, -1100 to 2550
A4PSWG: -9900, -11…
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.4
tnAmplifierPortInputToOutputGain
The following description applies to the
LINEOUT port of the uni-directional amplifier
card.
Current Ranges:
ASWG: -9900, -300 to 2900
A4PSWG: -9900, -300 to 2900.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.5
tnAmplifierPortDCMInPower
The following description applies to the DCM
In port of the amplifier card. -9900 indicates
no measured power.

Current range: -9900, -3000 to 2000.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.6
tnAmplifierPortDCMOutPower
The following description applies to the DCM
Out port of the amplifier card. -9900 indicates
no measured power.

Current range: -9900, -3000 to 2000.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.7
tnAmplifierPortActualTilt
The following description applies to the
signal port of the amplifier card:

Current range: -1000 to 500.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.8
tnAmplifierPortWtOcmMonitorPortOut
The associated WTOCM In port associated to the LD.

Current range: 0 to 0xFFFFFFFF.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.9
tnAmplifierPortOSCTxPowerIn
The EDFA module OSC transmitted input power of
the amplifier card. -9900 indicates no measured
power.

Current ranges:

A2P2125: -1500 to 1100
AM2032A: -1500 to 1100
AM2125A: -1500 to 110…
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.10
tnAmplifierPortOSCTxPowerOut
The EDFA module OSC transmitted output power of
the amplifier card. -9900 indicates no measured
power.

Current ranges:

A2P2125: -1500 to 1100
AA2DONW: -1500 to 1500
AM2032A: -1500 to 11…
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.11
tnAmplifierPortTestingActive
Node sets to true when testing in progress
on port (logic).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.12
tnAmplifierCommonEgressOutputPower
Calculated in scot when tiltadj is triggered.Referes to the
Target output power per channel,adjusted for the C+L Interaction.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.13
tnAmplifierActOutAtten
Actual amplifier attenuation available on the AWBxx packs only.
mBSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.14
tnAmplifierCommonEgressOutputPowerL
Calculated in scot when tiltadj is triggered.Referes to the
Target output power per channel,adjusted for the C+L Interaction.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.15
tnAmplifierActOutAttenL
Actual amplifier attenuation available on the AWBxx packs only
for L Band.
mBSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.16
tnAmplifierPortActualTiltL
The following description applies to the
signal port of the amplifier card for L band:

Current range: -1000 to 500.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.17
tnAmplifierPortSignalPowerOutL
The following description applies to the
signal port of the amplifier card for L band:

The total input power plus the programmed gain.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.18
tnAmplifierPortInputToOutputGainL
The following description applies to the
LINEOUT port of the uni-directional amplifier
card for L band.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.19
tnAmplifierPortOSCTxPowerOutL
The EDFA module OSC transmitted output power of
the amplifier card. -9900 indicates no measured
power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.20
tnAmplifierPortPowerInL
EDFA module total input power L band.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.21
tnAmplifierPortInfoOSCRxPowerIn
The EDFA module OSC received input power to the card.
-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.22
tnAmplifierPortInfoOSCSfpTxPowerOut
The OSCSFP transceiver output power -9900 indicates
no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.23
tnAmplifierPortInfoOSCSfpRxPowerIn
The OSCSFP transceiver input power -9900 indicates no
measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.24
tnAmplifierPortBoosterTargetPowerOut
Target Power Per Channel.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.25
tnAmplifierPortPowerOutL
Total output power for L Band.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.26
tnAmplifierPortSpanLoss
Span loss.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.27
tnAmplifierPortAprEDFApulsePower
Apr EDFA pulse Power.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.5.2.1.28

tnAmplifierMeshPortInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.5.4 · 1 row entry · 3 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierMeshPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierMeshPortInfoTable' 
The equipped ports on a mesh card.
tnAmplifierMeshPortInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.5.4.1
.
Indexes
Column Syntax OID
tnAmplifierMeshPortPowerOut
The following description applies to the output
port of the mesh card:

The total output power.

-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.4.1.1
tnAmplifierMeshPortSignalPowerOut
The following description applies to the
output port of the mesh card:

The total input power plus the programmed gain.

-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.4.1.2
tnAmplifierMeshPortInputToOutputGain
The following description reports the gain from
sigIn to sigOut ports of the MESH4 card:

OA module gain - EVOA loss - SEEPROM loss of
splitter.

Current range:

MESH4: -1100 to…
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.5.4.1.3

tnAmplifierHybridPortInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.5.6 · 1 row entry · 1 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierHybridPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierHybridPortInfoTable' 
The equipped ports on an hybrid amplifier card.
tnAmplifierHybridPortInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.5.6.1
.
Indexes
Column Syntax OID
tnAmplifierHybridPortInternalAmpModuleTemperature
Hybrid Amplifier Port Internal Module Temperature.
CelsiusSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.3.7.5.6.1.1

tnAmplifierCardInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.6.2 · 1 row entry · 27 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierCardInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierCardInfoTable' 
The equipped pumps and other values on an
amplifier card.
tnAmplifierCardInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.6.2.1
.
Indexes
Column Syntax OID
tnAmplifierCardOAMPump1Temperature
The current temperature of the OA Laser Pump 1.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.1
tnAmplifierCardOAMPump2Temperature
The current temperature of the OA Laser Pump 2.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.2
tnAmplifierCardOAMPump3Temperature
The current temperature of the OA Laser Pump 3.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.3
tnAmplifierCardOAMPump1Bias
The current bias of the OA Laser Pump 1.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.4
tnAmplifierCardOAMPump2Bias
The current bias of the OA Laser Pump 2.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.5
tnAmplifierCardOAMPump3Bias
The current bias of the OA Laser Pump 3.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.6
tnAmplifierCardOptIntSpanLoss
The span loss value.

Current range: 0 to 9900.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.7
tnAmplifierCardOAMPump4Temperature
The current temperature of the OA Laser Pump 4.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.8
tnAmplifierCardOAMPump5Temperature
The current temperature of the OA Laser Pump 5.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.9
tnAmplifierCardOAMPump6Temperature
The current temperature of the OA Laser Pump 6.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.10
tnAmplifierCardOAMPump4Bias
The current bias of the OA Laser Pump 4.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.11
tnAmplifierCardOAMPump5Bias
The current bias of the OA Laser Pump 5.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.12
tnAmplifierCardOAMPump6Bias
The current bias of the OA Laser Pump 6.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.13
tnAmplifierCardOAMLPump1Temperature
The current temperature of the OA Laser Pump 1 for L Band.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.14
tnAmplifierCardOAMLPump2Temperature
The current temperature of the OA Laser Pump 2 for L Band.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.15
tnAmplifierCardOAMLPump3Temperature
The current temperature of the OA Laser Pump 3 for L Band.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.16
tnAmplifierCardOAMLPump4Temperature
The current temperature of the OA Laser Pump 4 for L Band.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.17
tnAmplifierCardOAMLPump1Bias
The current bias of the OA Laser Pump 1 for L Band.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.18
tnAmplifierCardOAMLPump2Bias
The current bias of the OA Laser Pump 2 for L Band.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.19
tnAmplifierCardOAMLPump3Bias
The current bias of the OA Laser Pump 3 for L Band.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.20
tnAmplifierCardOAMLPump4Bias
The current bias of the OA Laser Pump 4 for L Band.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.21
tnAmplifierCardOAM1PumpTemperatures
String containing number of pumps for the 1st optical
amplifier on the card, followed by the pump temperature
for each pump. For IROADM9R OAM1 is the ingress OA module.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.22
tnAmplifierCardOAM2PumpTemperatures
String containing number of pumps for the 2nd OA module
on the card, followed by the pump temperature for each
pump. For IROADM9R OAM2 is the egress OA module.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.23
tnAmplifierCardOAM1PumpBiases
String containing number of pumps for the 1st optical
amplifier on the card, followed by the pump bias current
for each pump. For IROADM9R OAM1 is the ingress OA module.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.24
tnAmplifierCardOAM2PumpBiases
String containing number of pumps for the 2nd optical
amplifier on the card, followed by the pump bias current
for each pump. For IROADM9R OAM2 is the egress OA module.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.25
tnAmplifierCardOAM3PumpTemperatures
String containing number of pumps for the 3rd OA module
on the card, followed by the pump temperature for each
pump.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.26
tnAmplifierCardOAM3PumpBiases
String containing number of pumps for the 3rd optical
amplifier on the card, followed by the pump bias current
for each pump.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.7483.2.2.3.7.6.2.1.27

tnAmplifierMeshCardInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.6.4 · 1 row entry · 7 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierMeshCardInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierMeshCardInfoTable' 
The measured values on an amplifier module in
a mesh card.
tnAmplifierMeshCardInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.6.4.1
.
Indexes
Column Syntax OID
tnAmplifierMeshCardInternalTemperature
The following description applies to the
amplifier module in the mesh card:

The temperature of the laser.

Current range:

MESH4: -5 to 35.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.1
tnAmplifierMeshCardPowerIn
The following description applies to the input
port of the amplifier module in the mesh card:

The total input power.

-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.2
tnAmplifierMeshCardPowerOut
The following description applies to the output
port of the amplifier module in the mesh card:

The total output power.

-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.3
tnAmplifierMeshCardSignalPowerOut
The following description applies to the output
port of the amplifier module in the mesh card:

The total input power plus the programmed gain.

-9900 indicates no measured power.
mBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.4
tnAmplifierMeshCardInputToOutputGain
The following description applies to the output
port of the amplifier module in the mesh card:

Current range:

MESH4: -1100 to 2400.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.5
tnAmplifierMeshCardGainTilt
Current OA tilt setting for the output port of
the amplifier module in the mesh card.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.6
tnAmplifierMeshCardActualTilt
The following description applies to the output
port of the amplifier module in the mesh card:

Current range:

MESH4: -1000 to 500.
mBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.4.1.7

tnAmplifierHybridCardInfoTable

table
.1.3.6.1.4.1.7483.2.2.3.7.6.6 · 1 row entry · 8 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierHybridCardInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierHybridCardInfoTable' 
The measured values on an amplifier module in
a mesh card.
tnAmplifierHybridCardInfoEntry row .1.3.6.1.4.1.7483.2.2.3.7.6.6.1
.
Indexes
Column Syntax OID
tnAmplifierHybridCardOAMPump1Temperature
The current temperature of the OA Laser Pump 1.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.1
tnAmplifierHybridCardOAMPump2Temperature
The current temperature of the OA Laser Pump 2.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.2
tnAmplifierHybridCardOAMPump1Bias
The current bias of the OA Laser Pump 1.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.3
tnAmplifierHybridCardOAMPump2Bias
The current bias of the OA Laser Pump 2.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.4
tnAmplifierHybridCardOAMPump3Temperature
The current temperature of the OA Laser Pump 3.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.5
tnAmplifierHybridCardOAMPump4Temperature
The current temperature of the OA Laser Pump 4.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.6
tnAmplifierHybridCardOAMPump3Bias
The current bias of the OA Laser Pump 3.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.7
tnAmplifierHybridCardOAMPump4Bias
The current bias of the OA Laser Pump 4.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.6.6.1.8

tnAmplifierCardConfigTable

table
.1.3.6.1.4.1.7483.2.2.3.7.7.2 · 1 row entry · 6 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierCardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierCardConfigTable' 
The configurable values on an amplifier card.
tnAmplifierCardConfigEntry row .1.3.6.1.4.1.7483.2.2.3.7.7.2.1
.
Indexes
Column Syntax OID
tnAmplifierCardOptIntDetection
The status of the Optical Intrusion detection
feature.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.1
tnAmplifierCardOptIntBaseline
The optical intrusion baseline value, with -100
means no value has been set.

Current configurable range: -100, 100 to 5000.
mBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.2
tnAmplifierCardOptIntLossThreshold
The optical intrusion loss threshold value.

Current configurable range: 100 to 500.
mBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.3
tnAmplifierCardOptIntPollPeriod
The optical intrusion poll period.

Current configurable range: 20 to 120.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.4
tnAmplifierCardOptIntClearAlarm
Clears optical intrusion alarm.
TROPIC-TCTnCommandr/w
Type Values:
1noCmd
2execute
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.5
tnAmplifierCardAsonAddDropPlannedForOps
Used for ASON nodes running GMRE. The value
indicates if an LD defining the add/drop block
has been planned to accept OPSA OCH protected
services.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.3.7.7.2.1.6

tnAmplifierMeshCardConfigTable

table
.1.3.6.1.4.1.7483.2.2.3.7.7.4 · 1 row entry · 6 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAmplifierMeshCardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-AMPLIFIER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-AMPLIFIER-MIB::tnAmplifierMeshCardConfigTable' 
The provisioned parameters on an amplifier
module in a mesh card.
tnAmplifierMeshCardConfigEntry row .1.3.6.1.4.1.7483.2.2.3.7.7.4.1
.
Indexes
Column Syntax OID
tnAmplifierMeshCardPowerGain
The following description applies to the output
port of the amplifier module in the mesh card:

Current configurable range:

MESH4: 700 to 2400.
mBUnsigned32r/w
Constraints:
range: 700-2400
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.1
tnAmplifierMeshCardPowerGainMin
The following description applies to the output
port of the amplifier module in the mesh card:

This value is used by power management.

Current configurable range:

MESH4: 700…
mBUnsigned32r/w
Constraints:
range: 700-2400
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.2
tnAmplifierMeshCardPowerGainMax
The following description applies to the output
port of the amplifier module in the mesh card:

This value is used by power management.

Current configurable range:

MESH4: 700…
mBUnsigned32r/w
Constraints:
range: 700-2400
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.3
tnAmplifierMeshCardTargetTilt
The following description applies to the output
port of the amplifier module in the mesh card:

EPT - Tilt.

Current configurable range:

MESH4: -400 to 400.
mBInteger32r/w
Constraints:
range: -400-400
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.4
tnAmplifierMeshCardVoaSet
The following description applies to the output
port of the amplifier module in the mesh card:

Current configurable range:

MESH4: 0 to 1800.
mBmUnsigned32r/w
Constraints:
range: 0-1800
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.5
tnAmplifierMeshCardCommonEgressPower
Common Egress Power. This is the per channel
default egress power

Current configurable range:

MESH4: -1000 to 1000.
mBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.7483.2.2.3.7.7.4.1.6