tlpAgentConfigRemoteRegistration

Registers an SNMP contact's IP address and the port on which 
the contact is listening for SNMP traps.  Setting this
value is used to CREATE a table entry in a non-standard way.
Getting this value will return a string INADDR_ANY and any
port number.
          
The port number should always be included. When unregistering
an SNMP contact, the requester's IP address should be provided
with a port number of 0.  When setting or unsetting this OID, 
the IP address string should never be 0 nor should it be empty.
          
The registration uses its default community string to register
each contact. To use a community other than the default, then
it must be appended to the end of the string delimited with a
comma.
          
The address should be of the format 0.0.0.0:00000 for IPv4. 
If IPv6 is supported, use the bracket-enclosed format given 
in IETF RFC 2732 Section 2, with the following examples:
          
[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80
[1080:0:0:0:8:800:200C:417A]:162
[3ffe:2a00:100:7031::1]:162
[1080::8:800:200C:417A]:162,myCommunity
[::192.9.5.5]:162,myCommunity
[::FFFF:129.144.52.38]:80
[2010:836B:4179::836B:4179]:162

MIB

TRIPPLITE-PRODUCTS

OID

.1.3.6.1.4.1.850.1.2.2.1.1

Type

scalar

Access

readwrite

Status

current

Parent

tlpAgentConfig