tnSvcEndPointForceSwitchOver

TN-SERV-MIB · .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.9
MIB view Table view

Object

column r/w TN-TC-MIBTmnxActionType 
The value of tnSvcEndPointForceSwitchOver specifies whether to
force a switchover of the active SDP bind. When it is set to
'doAction', the SDP bind specified by
tnSvcEndPointForceSwitchOverSdpId will become active.

Context

MIB
TN-SERV-MIB
OID
.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.9
Type
column
Access
readwrite
Status
current
Parent
tnSvcEndPointEntry
Table
tnSvcEndPointTable
Siblings
25

Syntax

TN-TC-MIBTmnxActionType
Source
TN-TC-MIBTmnxActionType
Base type
Enumeration

Values & Constraints

Type Values
1doAction
2notApplicable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnSvcEndPointName
The value of tnSvcEndPointName specifies the name of the service endpoint.
columnTN-TC-MIBTNamedItem.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.1
tnSvcEndPointForceSwitchOverSdpId
The value of tnSvcEndPointForceSwitchOverSdpId specifies the SDP bind to switch over to when tnSvcEndPointForceSwitchOver is set to 'doAction'. If the value of this object is non …
columnTN-TC-MIBSdpBindId.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.10
tnSvcEndPointActiveHoldDelay
The value of tnSvcEndPointActiveHoldDelay specifies the amount of time in deci-seconds to hold the active state before going into the standby state when a local MC-LAG SAP goes do…
columndeci-seconds Unsigned32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.11
tnSvcEndPointIgnoreStandbySig
The value of tnSvcEndPointIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer wh…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.12
tnSvcEndPointMacPinning
The value of tnSvcEndPointMacPinning specifies whether or not MAC address pinning is active on this end-point.
columnTN-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.13
tnSvcEndPointMacLimit
The value of the object tnSvcEndPointMacLimit specifies the maximum number of learned and static entries allowed for this end-point. The value 0 means: no limit for…
columnInteger32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.14
tnSvcEndPointSuppressStandbySig
The value of the object tnSvcEndPointSuppressStandbySig specifies whether the 'pseudo wire forwarding standby' bit will be sent to the LDP peer whenever the spoke SDP 'tnSvcEndPoi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.15
tnSvcEndPointRevertTimeCountDn
The value of tnSvcEndPointRevertTimeCountDn indicates the timer count down before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed ove…
columnseconds Integer32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.16
tnSvcEndPointTxActiveChangeCount
The value of tnSvcEndPointTxActiveChangeCount indicates the number of times active transmit change has taken place in this endpoint.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.17
tnSvcEndPointTxActiveLastChange
The value of tnSvcEndPointTxActiveLastChange indicates the value of sysUpTime at the time of the last active transmit change in this endpoint.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.18
tnSvcEndPointTxActiveUpTime
The value of tnSvcEndPointTxActiveUpTime indicates the active 'up' time (in hundredths of a second) of the end-point object that is current transmit active.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.19
tnSvcEndPointRowStatus
The value of tnSvcEndPointRowStatus is used for the creation and deletion of service endpoints.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.2
tnSvcEndPointMCEPId
The value of tnSvcEndPointMCEPId specifies the multi-chassis end-point identifier assigned to this endpoint.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.20
tnSvcEndPointMCEPPeerAddrType
The value of tnSvcEndPointMCEPPeerAddrType specifies the address type of tnSvcEndPointMCEPPeerAddr object. An 'inconsistentValue' error is returned if this object i…
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.21
tnSvcEndPointMCEPPeerAddr
The value of tnSvcEndPointMCEPPeerAddr specifies the IP address of multi-chassis end-point peer. An 'inconsistentValue' error is returned if this object is set to n…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.22
tnSvcEndPointMCEPPeerName
The value of tnSvcEndPointMCEPPeerName specifies the name of multi-chassis end-point peer TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName. An 'inconsistentValue' error is…
columnTN-TC-MIBTNamedItemOrEmpty.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.23
tnSvcEndPointBlockOnMeshFail
The value of tnSvcEndPointBlockOnMeshFail specifies that the operational status of spoke-SDPs in the endpoint will be affected by the operational status of associated mesh SDPs in…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.24
tnSvcEndPointMCEPPsvModeActive
The value of tnSvcEndPointMCEPPsvModeActive indicates whether passive-mode behavior is currently active on this multi-chassis end-point.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.25
tnSvcEndPointStandbySigMaster
The value of tnSvcEndPointStandbySigMaster specifies whether PW standby bit will be sent to T-LDP peer whenever spoke-SDPs of this endpoint are selected as standby.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.26
tnSvcEndPointDescription
The value of tnSvcEndPointDescription specifies the textual description of this service endpoint.
columnTN-TC-MIBServObjDesc.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.3
tnSvcEndPointRevertTime
The value of tnSvcEndPointRevertTime specifies the time to wait before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a back…
columnseconds Integer32.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.4
tnSvcEndPointTxActiveType
The value of tnSvcEndPointTxActiveType indicates the type of end-point object that is current transmit active.
columnEnumeration.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.5
tnSvcEndPointTxActivePortId
The value of tnSvcEndPointTxActivePortId indicates the Port ID of the SAP that is transmit active. This object is only valid when tnSvcEndPointTxActiveType is 'sap'.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.6
tnSvcEndPointTxActiveEncap
The value of tnSvcEndPointTxActiveEncap indicates the encapsulation value of the SAP that is transmit active. This object is only valid when tnSvcEndPointTxActiveType is 'sap'.
columnTN-TC-MIBTmnxEncapVal.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.7
tnSvcEndPointTxActiveSdpId
The value of tnSvcEndPointTxActiveSdpId indicates the SDP bind ID of the SDP bind that is transmit active. This object is only valid when tnSvcEndPointTxActiveType is 'sdpBind'.
columnTN-TC-MIBSdpBindId.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.8