TN-SERV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
193

tnCustInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnCustInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnCustInfoTable' 
A table that contains tnCustomer information. There
is an entry in this table corresponding to the
default tnCustomer. This entry cannot be edited or
deleted, and it is used as the default tnCustomer
for newly created services.
tnCustInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.1.3.1
Information about a specific tnCustomer.
Indexes
Column Syntax OID
tnCustId
Customer identifier. This ID must be unique
within a service domain.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.1
tnCustRowStatus
The value of the object tnCustRowStatus specifies the
status of this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.2
tnCustDescription
The value of the object tnCustDescription specifies
optional, generic information about this tnCustomer
in a displayable format.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.3
tnCustContact
The value of the object tnCustContact specifies the name of
the primary contact person for this tnCustomer.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.4
tnCustPhone
The value of the object tnCustPhone specifies the
phone/pager number used to reach the primary contact
person.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.5
tnCustLastMgmtChange
The value of the object tnCustLastMgmtChange indicates the
value of the object sysUpTime at the time of the
most recent management-initiated change to
this tnCustomer.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.1.3.1.6

tnSvcBaseInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.2 · 1 row entry · 30 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSvcBaseInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnSvcBaseInfoTable' 
A table that contains basic service information.
tnSvcBaseInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.2.1
Basic information about a specific service.
Indexes
Column Syntax OID
tnSvcId
The value of the object tnSvcId specifies the
Service identifier. This value should be unique within the
service domain.
TN-TC-MIBTmnxServId
Type Constraints:
range: 0..2147483650
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.1
tnSvcRowStatus
This value of the object tnSvcRowStatus specifies the
status of this row.

To delete an entry from this table, the corresponding
service must be administratively down, have no SAP's
defined on it, and hav…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.2
tnSvcType
The value of the object tnSvcType specifies the service
type: e.g. epipe, tls, etc. The value of this object
must be specified when the row is created and cannot be
changed while the row status is 'active'.
ServTyper/w
Type Values:
0unknown
1epipe
2p3pipe
3tls
4vprn
5ies
6mirror
7apipe
8fpipe
9ipipe
10cpipe
16etree
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.3
tnSvcCustId
The value of the object tnSvcCustId specifies the ID of the
tnCustomer who owns this service.
The value of this object must be specified when the row is
created and cannot be changed while the row status is
'active'.
TN-TC-MIBTmnxCustIdr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.4
tnSvcIpRouting
The value of the object tnSvcIpRouting specifies, for a
'tls' service, whether IP routing is enabled.
For 'epipe', 'p3pipe', 'apipe', 'fpipe', 'ipipe'
and 'cpipe' services, this object cannot be set and has
the value 'd…
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.5
tnSvcDescription
The value of the object tnSvcDescription specifiers an
optional, generic information about this service.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.6
tnSvcMtu
The value of the object tnSvcMtu specifies the largest frame
size (in octets) that this service can handle.

Setting svcMtu to a value of zero (0), causes the agent
to recalculate the default MTU size.
…
Integer32r/w
Constraints:
range: 0-9194
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.7
tnSvcAdminStatus
The value of the object tnSvcAdminStatus specifies the
desired state of this service.
TN-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.8
tnSvcOperStatus
The value of the object tnSvcOperStatus indicates the
operating state of this service. The requirements for a
service to be operationally up depend on the service type:

epipe, p3pipe, apipe, fpipe, ipipe …
TN-TC-MIBServiceOperStatus
Type Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.9
tnSvcNumSaps
The value of the object tnSvcNumSaps indicates the number of
SAPs defined on this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.10
tnSvcNumSdps
The value of the object tnSvcNumSdps indicates the number of
SDPs bound to this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.11
tnSvcLastMgmtChange
The value of of the object tnSvcLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this service.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.12
tnSvcDefMeshVcId
The value of the object tnSvcDefMeshVcId specifies, only in
services that accept mesh SDP bindings, the VC ID portion
of the sdpBindId index of each mesh SDP binding defined in
the service. The default value of this obj…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.13
tnSvcVpnId
The value of the object tnSvcVpnId specifies the VPN ID
assigned to this service. The value of this object can
be specified only when the row is created. If the value is
not specified, it defaults to the service ID.
VpnIdr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.14
tnSvcVRouterId
The value of the object tnSvcVRouterId specifies, for a IES
or VPRN service the associated virtual router instance
where its interfaces are defined.

This object has a special significance for the VPRN
ser…
TN-TC-MIBTmnxVRtrIDOrZeror/w
Type Constraints:
range: 0..10240
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.15
tnSvcAutoBind
The value of the object tnSvcAutoBind specifies, for a VPRN
service, the type of lookup to be used by the routing
instance if no SDP to the destination exists.
Enumerationr/w
Enumerated Values:
1none
2gre
3ldp
4rsvp-te
5mpls
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.16
tnSvcLastStatusChange
The value of the object tnSvcLastStatusChange indicates the
value of sysUpTime at the time of the most recent
operating status change to his service.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.17
tnSvcVllType
The value of the object tnSvcVllType specifies, for a apipe,
fpipe or cpipe service, the type of pseudo-wire to be
signalled for the service. The default for this object
depends on the service type:
'atmSdu' for apipes…
Enumerationr/w
Enumerated Values:
1undef
6atmSdu
7atmCell
8atmVcc
9atmVpc
10frDlci
12satopE1
13satopT1
14satopE3
15satopT3
16cesopsn
17cesopsnCas
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.18
tnSvcMgmtVpls
The value of the object tnSvcMgmtVpls specifies, only if
tnSvcType = 'tls' whether or not the service is a management
vpls.
If set to false the service is acting as a regular VPLS
service. If set to true, the service is…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.19
tnSvcRadiusDiscovery
The value of the object tnSvcRadiusDiscovery specifies whether RADIUS
auto-discovery is enabled on this service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.20
tnSvcRadiusUserNameType
The value of the object tnSvcRadiusUserNameType specifies whether RADIUS
user name is vpn-id or router-distinguisher. By default, the
value of this object is 'none'.

tnSvcRadiusUserNameType and tnSvcRadi…
Enumerationr/w
Enumerated Values:
0none
1vpn-id
2router-distinguisher
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.21
tnSvcRadiusUserName
The value of the object tnSvcRadiusUserName specifies the RADIUS
user name. tnSvcRadiusUserNameType specifies the type of the
username and has to be set along with tnSvcRadiusUserName when
tnSvcRadiusUserName can eith…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.22
tnSvcVcSwitching
The value of the object tnSvcVcSwitching specifies if the PW
switching signalling is used for the Spokes configured under the
service.
This object can only be specified when the row is created.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.23
tnSvcRadiusPEDiscPolicy
The value of the object tnSvcRadiusPEDiscPolicy specifies the
RADIUS PE Discovery Policy name.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.24
tnSvcRadiusDiscoveryShutdown
The value of tnSvcRadiusDiscoveryShutdown specifies the desired
administrative state for the RADIUS auto-discovery server. When
the server is 'down' the operational state of the server is
disabled.

By def…
TN-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.25
tnSvcVplsType
Backbone VPLS ('bVpls') refers to the B-Component instance
of the Provider Backbone Bridging (PBB/IEEE 802.1ah)
feature. It represents the Multi-point tunneling component
that multiplexes multiple Customer VPNs (ISIDs) …
Enumerationr/w
Enumerated Values:
1none
2bVpls
3iVpls
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.26
tnSvcNumMcStandbySaps
The value of the object tnSvcNumMcStandbySaps indicates the
number of SAPs defined on this service on a port which is
in multi-chassis standby mode.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.27
tnSvcName
The value of the svcName specifies the name of the service.
This value should be unique within the service domain.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.28
tnsvcEpipeAllowIpIfBinding
The value of the object tnsvcEpipesAllowIpIfBinding indicates,
whether to allow IP interface binding on this EPIPE service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.29
tnSvcAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.6.1.2.4.2.2.1.30

tnSvcTlsInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.3 · 1 row entry · 80 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSvcTlsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnSvcTlsInfoTable' 
A table that contains TLS service information.
tnSvcTlsInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.3.1
TLS specific information about a service.
Indexes
Column Syntax OID
tnSvcTlsMacLearning
The value of the object tnSvcTlsMacLearning specifies
whether the MAC learning process is enabled in this TLS.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.1
tnSvcTlsDiscardUnknownDest
The value of the object tnSvcTlsDiscardUnknownDest
specifies whether frames received with an unknown
destination MAC are discarded in this TLS.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.2
tnSvcTlsFdbTableSize
The value of the object tnSvcTlsFdbTableSize specifies the
maximum number of learned and static entries allowed in
the FDB of this service.

The maximum value of tnSvcTlsFdbTableSize is '511999', when
the …
Integer32r/w
Constraints:
range: 1-511999
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.3
tnSvcTlsFdbNumEntries
The value of the object tnSvcTlsFdbNumEntries indicates the
current number of entries in the FDB of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.4
tnSvcTlsFdbNumStaticEntries
The value of the object tnSvcTlsFdbNumStaticEntries
indicates the current number of static entries in the FDB
of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.5
tnSvcTlsFdbLocalAgeTime
The value of the object tnSvcTlsFdbLocalAgeTime specifies
the number of seconds used to age out TLS FDB entries
learned on local SAPs.
Integer32r/w
Constraints:
range: 60-86400
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.6
tnSvcTlsFdbRemoteAgeTime
The value of the object tnSvcTlsFdbRemoteAgeTime specifies
the number of seconds used to age out TLS FDB entries
learned on an SDP. These entries correspond to MAC
addresses learned on remote SAPs.
Integer32r/w
Constraints:
range: 60-86400
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.7
tnSvcTlsStpAdminStatus
The value of the object tnSvcTlsStpAdminStatus specifies the
administrative state of the Spanning Tree Protocol
instance associated with this service.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.8
tnSvcTlsStpPriority
The value of the object tnSvcTlsStpPriority specifies
the priority of the Spanning Tree Protocol instance
associated with this service.
It is used as the highest 4 bits of the Bridge ID
included in the Configuration BP…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.9
tnSvcTlsStpBridgeAddress
The value of the object tnSvcTlsStpBridgeAddress indicates
the MAC address used to identify this bridge in the
network. It is used as the last six octets of the
Bridge ID included in the Configuration BPDU's generated
…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.10
tnSvcTlsStpTimeSinceTopologyChange
The value of the object tnSvcTlsStpTimeSinceTopologyChange
indicates the time (in hundredths of a second) since the
last time a topology change was detected by the Spanning
Tree Protocol instance associated with this se…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.11
tnSvcTlsStpTopologyChanges
The value of the object tnSvcTlsStpTopologyChanges indicates
the total number of topology changes detected by the
Spanning Tree Protocol instance associated with this
service since the management entity was last reset o…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.12
tnSvcTlsStpDesignatedRoot
The value of the object tnSvcTlsStpDesignatedRoot indicates
the bridge identifier of the root of the spanning tree as
determined by the Spanning Tree Protocol instance
associated with this service. This value is used as…
BridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.13
tnSvcTlsStpRootCost
The value of the object tnSvcTlsStpRootCost indicates the
cost of the path to the root bridge as seen from this
bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.14
tnSvcTlsStpRootPort
The value of the object tnSvcTlsStpRootPort indicates the
port number of the port which offers the lowest cost path
from this bridge to the root bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.15
tnSvcTlsStpMaxAge
The value of the object tnSvcTlsStpMaxAge indicates the
maximum age of Spanning Tree Protocol information learned
from the network on any port before it is discarded. This
is the actual value that this bridge is current…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.16
tnSvcTlsStpHelloTime
The value of the object tnSvcTlsStpHelloTime indicates the
amount of time between the transmission of Configuration
BPDUs. This is the actual value that this bridge is
currently using.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.17
tnSvcTlsStpForwardDelay
The value of the object tnSvcTlsStpForwardDelay indicates
how fast a port changes its state when moving towards the
Forwarding state. The value determines how long the port
stays in each of the Listening and Learning st…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.19
tnSvcTlsStpBridgeMaxAge
The value of the object tnSvcTlsStpBridgeMaxAge specifies
the value that all bridges should use for 'MaxAge' when this
bridge is acting as the root bridge.
Integer32r/w
Constraints:
range: 6-40
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.20
tnSvcTlsStpBridgeHelloTime
The value of the object tnSvcTlsStpBridgeHelloTime specifies
the value that all bridges should use for 'HelloTime' when
this bridge is acting as the root bridge.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.21
tnSvcTlsStpBridgeForwardDelay
The value of the object tnSvcTlsStpBridgeForwardDelay
specifies the value that all bridges should use for
'ForwardDelay' when this bridge is acting as the root
bridge.
Integer32r/w
Constraints:
range: 4-30
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.22
tnSvcTlsStpOperStatus
The value of the object tnSvcTlsStpOperStatus indicates the
operating status of the Spanning Tree Protocol instance
associated with this service.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.30
tnSvcTlsStpVirtualRootBridgeStatus
The value of the object tnSvcTlsStpVirtualRootBridgeStatus
indicates the operating status of the Virtual Root Bridge
of the Spanning Tree Protocol instance associated with
this service. The status of the Virtual Root …
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.31
tnSvcTlsMacAgeing
The value of the object tnSvcTlsMacAgeing specifies whether
the MAC aging process is enabled in this TLS.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.32
tnSvcTlsStpTopologyChangeActive
The value of the object tnSvcTlsStpTopologyChangeActive
indicates, when set to 'true', that a topology change is
currently in progress.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.33
tnSvcTlsFdbTableFullHighWatermark
The value of the object tnSvcTlsFdbTableFullHighWatermark
specifies the utilization of the FDB table of this TLS
service at which a table full alarm will be raised
by the agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.34
tnSvcTlsFdbTableFullLowWatermark
The value of the object tnSvcTlsFdbTableFullLowWatermark
specifies the utilization of the FDB table of this TLS
service at which a table full alarm will be raised
by the agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.35
tnSvcTlsVpnId
The value of the object tnSvcTlsVpnId indicates the VPN ID
of the associated TLS service.
VpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.36
tnSvcTlsCustId
The vakue of the object tnSvcTlsCustId indicates the
Customer ID of the associated TLS service.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.37
tnSvcTlsStpVersion
The value of the object tnSvcTlsStpVersion specifies the
version of Spanning Tree Protocol the bridge is currently
running.

The value 'rstp' corresponds to the Rapid Spanning
Tree Protocol specified in I…
Enumerationr/w
Enumerated Values:
2rstp
3compDot1w
4dot1w
5mstp
6pmstp
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.38
tnSvcTlsStpHoldCount
The value of the object tnSvcTlsStpHoldCount specifies the
maximum number of BPDUs that are transmitted in any
'HelloTime' interval.
The value used by the bridge to limit the maximum
transmission rate of BPDUs.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.39
tnSvcTlsStpPrimaryBridge
The value of the object tnSvcTlsStpPrimaryBridge indicates
the BridgeId of the bridge that acts as the primary bridge,
being the gateway from the core mesh towards the root
bridge.
BridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.40
tnSvcTlsStpBridgeInstanceId
The value of the object tnSvcTlsStpBridgeInstanceId
indicates a 12 bit value chosen by the the system. It is
part of the STP bridge Id, which consists of 8 octets:
- 4 highest bits of octet 1:
the bridge priority (r…
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.41
tnSvcTlsStpVcpOperProtocol
The value of the object tnSvcTlsStpVcpOperProtocol indicates
whether stp, rstp or mstp is running on this VCP.
If the protocol is not enabled on this VCP, the value
notApplicable is returned.
StpProtocol
Type Values:
0notApplicable
1stp
2rstp
3mstp
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.42
tnSvcTlsMacMoveMaxRate
The value of the object tnSvcTlsMacMoveMaxRate specifies the
maximum rate at which MAC's can be re-learned in this TLS
service, before the SAP where the moving MAC was last seen
is automatically disabled in order to pro…
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.43
tnSvcTlsMacMoveRetryTimeout
The value of the object tnSvcTlsMacMoveRetryTimeout
specifies the time in seconds to wait before a SAP that
has been disabled after exceeding the maximum re-learn
rate is re-enabled.

A value of zero indi…
Unsigned32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.44
tnSvcTlsMacMoveAdminStatus
The value of the object tnSvcTlsMacMoveAdminStatus
specifies the administrative state of the
MAC movement feature associated with this service.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.45
tnSvcTlsMacRelearnOnly
The value of the object tnSvcTlsMacRelearnOnly indicates
when set to 'true' that either the FDB table of this TLS
service is full, or that the maximum system-wide number of
MAC's supported by the agent has been reached,…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.46
tnSvcTlsMfibTableSize
The value of the object tnSvcTlsMfibTableSize specifies the
maximum number of entries allowed in the MFIB table of
this service. If the value is 0, then there is no limit.
Integer32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.47
tnSvcTlsMfibTableFullHighWatermark
The value of the object tnSvcTlsMfibTableFullHighWatermark
specifies the utilization of the MFIB table of this TLS
service at which a table full alarm will be raised by the
agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.48
tnSvcTlsMfibTableFullLowWatermark
The value of the object tnSvcTlsMfibTableFullLowWatermark
specifies utilization of the MFIB table of this TLS
service at which a table full alarm will be cleared by the
agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.49
tnSvcTlsMacFlushOnFail
The value of the object tnSvcTlsMacFlushOnFail specifies
whether a special mac-flush is sent when a
port or sap becomes operational down.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.50
tnSvcTlsStpRegionName
The value of the object tnSvcTlsStpRegionName specifies
the MSTP region name. Together with region revision and
VLAN-to-instance assignment it defines the MSTP region.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.51
tnSvcTlsStpRegionRevision
The value of the object tnSvcTlsStpRegionRevision specifies
the MSTP region revision number. Together with region
name and VLAN-to-instance assignment it defines the MSTP
region.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.52
tnSvcTlsStpBridgeMaxHops
The value of the object tnSvcTlsStpBridgeMaxHops specifies
the maximum number of hops (known as 'MaxHops' in 802.1Q).
Integer32r/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.53
tnSvcTlsStpCistRegionalRoot
The value of the object tnSvcTlsStpCistRegionalRoot
indicates the bridge identifier of the regional root of
the CIST spanning tree as determined by the Spanning Tree
Protocol instance associated with this service. This …
BridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.54
tnSvcTlsStpCistIntRootCost
The value of the object tnSvcTlsStpCistIntRootCost indicates
the cost of the path to the CIST regional root bridge
as seen from this bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.55
tnSvcTlsStpCistRemainingHopCount
The value of the object tnSvcTlsStpCistRemainingHopCount
specifies the remaining number of hops.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.56
tnSvcTlsStpCistRegionalRootPort
The value of the object tnSvcTlsStpCistRegionalRootPort
indicates the port number of the port which offers the
lowest cost path from this bridge to the regional root
bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.57
tnSvcTlsFdbNumLearnedEntries
The value of the object tnSvcTlsFdbNumLearnedEntries
indicates the current number of learned entries in the FDB
of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.58
tnSvcTlsFdbNumOamEntries
The value of the object tnSvcTlsFdbNumOamEntries
indicates the current number of OAM entries in the FDB
of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.59
tnSvcTlsFdbNumDhcpEntries
The value of the object tnSvcTlsFdbNumDhcpEntries
indicates the current number of dhcp-learned entries in the
FDB of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.60
tnSvcTlsFdbNumHostEntries
The value of the object tnSvcTlsFdbNumHostEntries
indicates the current number of host-learned entries in the
FDB of this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.61
tnSvcTlsShcvAction
The value of the object tnSvcTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails.
Enumerationr/w
Enumerated Values:
1alarm
2remove
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.62
tnSvcTlsShcvSrcIp
The value of the object tnSvcTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.63
tnSvcTlsShcvSrcMac
The value of the object tnSvcTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.64
tnSvcTlsShcvInterval
The value of the object tnSvcTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking.
minutesUnsigned32r/w
Constraints:
range: 0-6000
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.65
tnSvcTlsPriPortsCumulativeFactor
The value of the object tnSvcTlsPriPortsCumulativeFactor
specifies a factor for the primary ports defining how
many MAC-relearn periods should be used to measure the
MAC-relearn rate, tnSvcTlsMacMoveMaxRate. This rate m…
Unsigned32r/w
Constraints:
range: 3-10
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.66
tnSvcTlsSecPortsCumulativeFactor
The value of the object tnSvcTlsSecPortsCumulativeFactor
specifies a factor for the secondary ports defining how
many MAC-relearn periods should be used to measure the
MAC-relearn rate, tnSvcTlsMacMoveMaxRate. This rate…
Unsigned32r/w
Constraints:
range: 2-9
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.67
tnSvcTlsL2ptTermEnabled
The value of the object tnSvcTlsL2ptTermEnabled
indicates if 'L2PT-termination' and/or 'Bpdu-translation'
is in use in this service by at least one SAP or
spoke SDP Bind. If the value is 'true', it means that
at least o…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.68
tnSvcTlsPropagateMacFlush
The value of tnSvcTlsPropagateMacFlush specifies whether
'MAC flush' messages received from the given LDP are
propagated to all spoke-SDPs and mesh-SDPs within the
context of this VPLS service. The propagation will foll…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.69
tnSvcTlsMrpAdminStatus
The value of the object tnSvcTlsMrpAdminStatus specifies
whether the Multiple Registration Protocol (MRP) is
enabled in this TLS.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.70
tnSvcTlsMrpMaxAttributes
The value of the object tnSvcTlsMrpMaxAttributes indicates
maximum number of MRP attributes supported in this TLS.

In most cases the default value is 2048 MRP attributes.
For some platform and chassis typ…
Unsigned32r/w
Constraints:
range: 1-2048
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.71
tnSvcTlsMrpAttributeCount
The value of the object tnSvcTlsMrpAttributeCount indicates
the number of MRP attributes currently associated to the
TLS by either being registered or declared.

Note that an 'iVpls' service (with tnSvcVpl…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.72
tnSvcTlsMrpFailedRegisterCount
The value of the object tnSvcTlsMrpFailedRegisterCount
indicates number of failed MRP attribute registrations in
this TLS.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.73
tnSvcTlsMcPathMgmtPlcyName
The value of tnSvcTlsMcPathMgmtPlcyName specifies the
multicast policy name configured on this service.
TN-TC-MIBTNamedItemr/w
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.74
tnSvcTlsMrpFloodTime
The value of the object tnSvcTlsMrpFloodTime specifies
the amount of time in seconds after a status change in the
TLS during which traffic is flooded. Once that time
expires, traffic will be delivered according to the …
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 3-600
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.75
tnSvcTlsMrpAttrTblHighWatermark
The value of the object tnSvcTlsMrpAttrTblHighWatermark
specifies the utilization of the MRP attribute table of
this TLS service at which a table full alarm will be raised
by the agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.76
tnSvcTlsMrpAttrTblLowWatermark
The value of the object tnSvcTlsMrpAttrTblLowWatermark
specifies utilization of the MRP attribute table of this
TLS service at which a table full alarm will be cleared by
the agent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.77
tnSvcTlsMacMoveNumRetries
The value of the object tnSvcTlsMacMoveNumRetries
specifies the number of times retries are performed for
reenabling the SAP/SDP.

A value of zero indicates unlimited number of retries.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.78
tnSvcTlsMacSubNetLen
The value of the object tnSvcTlsMacSubNetLen specifies
the number of bits to be considered when performing
MAC-Learning or MAC-Switching.
Integer32r/w
Constraints:
range: 24-48
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.79
tnSvcTlsSendFlushOnBVplsFail
The value of the object tnSvcTlsSendFlushOnBVplsFail
specifies whether a special 'MAC flush' is sent in the
local 'iVpls' following a failure of SAP/Endpoint/SDP in
the 'bVpls'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.80
tnSvcTlsPropMacFlushFromBVpls
The value of the object tnSvcTlsPropMacFlushFromBVpls
specifies whether to propagate any 'MAC flush' from 'bVpls'
into the local 'iVpls'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.81
tnSvcTlsMacNotifInterval
The value of tnSvcTlsMacNotifInterval specifies time-interval
between subsequent MAC notification messages. The default
value for this object indicates that the value is inherited
from tnSvcMacNotifInterval.
deci-secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.82
tnSvcTlsMacNotifCount
The value of tnSvcTlsMacNotifCount specifies number of
MAC notification messages to be sent. The default value
for this object indicates that the value is inherited from
tnSvcMacNotifCount.
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.83
tnSvcTlsMacNotifAdminState
The value of tnSvcTlsMacNotifAdminState specifies whether
MAC notification messages should be sent.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.84
tnSvcTlsShcvRetryTimeout
The value of the object tnSvcTlsShcvRetryTimeout specifies
the timeout in seconds before a connectivity check
retransmission.
secondsUnsigned32r/w
Constraints:
range: 10-60
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.87
tnSvcTlsShcvRetryCount
The value of the object tnSvcTlsShcvRetryCount specifies
the number of connectivity check retransmissions.

Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each int…
Unsigned32r/w
Constraints:
range: 2-29
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.88
tnsvcTlsAllowIpIfBinding
The value of the object tnsvcTlsAllowIpIfBinding indicates,
whether to allow IP interface binding on this service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.89
tnSvcTlsMfibTableNumEntries
The value of the object tnSvcTlsMfibTableNumEntries indicates
the number of MFIB entries on this service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.3.1.90

tnTlsFdbInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.4 · 1 row entry · 18 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnTlsFdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnTlsFdbInfoTable' 
A table that contains TLS FDB information.
tnTlsFdbInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.4.1
Information about a specific TLS FDB.
Indexes
Column Syntax OID
tnTlsFdbMacAddr
The value of the object tnTlsFdbMacAddr specifies the
48-bit IEEE 802.3 MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.1
tnTlsFdbRowStatus
The value of the object tnTlsFdbRowStatus specifies the
status of this row. The only values supported during a set
operation are 'createAndGo' and 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.2
tnTlsFdbType
The value of the object tnTlsFdbType specifies:
- 'static': Static TLS FDB entries created via management
- 'learned': dynamic entries created via the learning
process
- 'oam': entries created via the …
Enumerationr/w
Enumerated Values:
1static
2learned
3oam
4dhcp
5host
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.3
tnTlsFdbLocale
The value of the object tnTlsFdbLocale specifies for TLS
FDB entries defined on a local SAP the value 'sap',
remote entries defined on an SDP have the value 'sdp',
entries associated with the Control Processor have the
…
Enumerationr/w
Enumerated Values:
1sap
2sdp
3cpm
4endpoint
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.4
tnTlsFdbPortId
When the value of tnTlsFdbLocale is 'sap', this
object, along with tnTlsFdbEncapValue, specifies
the SAP associated with the MAC address defined
by tnTlsFdbMacAddr. This object is otherwise
insignificant and should cont…
TN-TC-MIBTmnxPortIDr/w .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.5
tnTlsFdbEncapValue
The value of the object tnTlsFdbEncapValue specifies, when
the value of tnTlsFdbLocale is 'sap', along with
tnTlsFdbPortId, SAP associated with the MAC address defined
by tnTlsFdbMacAddr. This object is otherwise insign…
TN-TC-MIBTmnxEncapValr/w .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.6
tnTlsFdbSdpId
The value of the object tnTlsFdbSdpId specifies, when the
value of tnTlsFdbLocale is 'sdp', along with tnTlsFdbVcId,the
SDP Binding associated with the MAC address
defined by tnTlsFdbMacAddr. This object is other-
wise …
SdpIdr/w
Type Constraints:
range: 0..17407
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.7
tnTlsFdbVcId
The value of the object tnTlsFdbVcId specifies, when the
value of tnTlsFdbLocale is 'sdp', along with tnTlsFdbSdpId,
the SDP Binding associated with the MAC address defined by
tnTlsFdbMacAddr. This object is other-wise …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.8
tnTlsFdbVpnId
The value of the object tnTlsFdbVpnId indicates the VPN ID
of the associated TLS.
VpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.9
tnTlsFdbCustId
The value of the object tnTlsFdbCustId indicates the
Customer ID of the associated TLS.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.10
tnTlsFdbLastStateChange
The value of the object tnTlsFdbLastStateChange indicates
the value of sysUpTime at the time of the most recent
state change of this entry. A state change is defined as a
change in the value of: tnTlsFdbRowStatus, tnTls…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.11
tnTlsFdbProtected
The value of the object tnTlsFdbProtected indicates
whether or not this MAC is protected. When the value
of this object is 'true' the agent will protect
the MAC from being learned or re-learned on a SAP
that has restric…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.12
tnTlsFdbBackboneDstMac
The value of the object tnTlsFdbBackboneDstMac indicates the
Backbone VPLS service MAC address used as destination MAC
address in the Provider Backbone Bridging frames for this
tnTlsFdbMacAddr.

This objec…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.13
tnTlsFdbNumIVplsMac
The value of the object tnTlsFdbNumIVplsMac indicates the
number of ISID VPLS service MAC addressess which are using
this Backbone MAC address defined by tnTlsFdbMacAddr.

This object is insignificant for …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.14
tnTlsFdbEndPointName
The value of tnTlsFdbEndPointName specifies the name of the service
endpoint associated with the MAC Address.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.15
tnTlsFdbEPMacOperSdpId
The value of the object tnTlsFdbEPMacOperSdpId along with
tnTlsFdbEPMacOperVcId indicates the SDP binding associated with this
static MAC address for this endpoint.

This object is valid when tnTlsFdbLocal…
SdpId
Type Constraints:
range: 0..17407
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.16
tnTlsFdbEPMacOperVcId
The value of the object tnTlsFdbEPMacOperVcId along with
tnTlsFdbEPMacOperSdpId indicates the SDP binding associated with this
static MAC address for this endpoint.

This object is valid when tnTlsFdbLocal…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.17
tnTlsFdbPbbNumEpipes
The value of the object tnTlsFdbPbbNumEpipes indicates number of E-Pipes
that resolve to this MAC Address.

This object is valid for service with tnSvcVplsType set to 'bVpls',
otherwise it should contain a…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.4.1.18

tnTlsShgInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.6 · 1 row entry · 11 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnTlsShgInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnTlsShgInfoTable' 
A table that contains TLS service split-horizon group
information. A maximum of 30 split-horizon groups can
be created in a given TLS service. Maximum is set to 15
for a TLS service with tnSvcVplsType set to 'bVpls', or
'iVpls'.
tnTlsShgInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.6.1
Split-horizon group information about a TLS service.
Indexes
Column Syntax OID
tnTlsShgName
The value of the object tnTlsShgName specifies the name of
the split-horizon group. The name must be unique within
a TLS, however the same name can appear in different
TLS services, in which case they denote different
s…
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.1
tnTlsShgRowStatus
The value of the object tnTlsShgRowStatus specifies the
status of this row.
The only values supported during a set operation are
'createAndGo' and 'destroy'. To delete an entry
from this table, there should be no TLS S…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.2
tnTlsShgCustId
The value of the object tnTlsShgCustId indicates the
Customer ID of the associated TLS service.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.3
tnTlsShgInstanceId
The value of the object tnTlsShgInstanceId indicates the
instance identifier for the split horizon group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.4
tnTlsShgDescription
The value of the object tnTlsShgDescription specifies
generic information about this split-horizon group.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.5
tnTlsShgLastMgmtChange
The value of the object tnTlsShgLastMgmtChange indicates the
value of sysUpTime at the time of the most recent
management-initiated change to this split-horizon group.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.6
tnTlsShgResidential
The value of the object tnTlsShgResidential specifies
whether or not the split-horizon-group is residential.In
a Residential Split Horizon Group (RSHG) there is no
downstream broadcast, and all saps in the group will …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.7
tnTlsShgRestProtSrcMac
The value of the object tnTlsShgRestProtSrcMac indicates
how the agent will handle relearn requests for protected
MAC addresses received on SAP's belonging to this SHG.
When the value of this object is 'true' requests t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.8
tnTlsShgRestUnprotDstMac
The value of the object tnTlsShgRestUnprotDstMac indicates
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC addre…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.9
tnTlsShgRestProtSrcMacAction
The value of the object tnTlsShgRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP
belonging to this SHG.
When the value of this object is 'd…
Enumerationr/w
Enumerated Values:
1disable
2alarm-only
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.10
tnTlsShgCreationOrigin
The value of tnTlsShgCreationOrigin indicates the protocol or
mechanism which created this SHG.
L2RouteOrigin
Type Values:
1manual
2bgp-l2vpn
3radius
 .1.3.6.1.4.1.7483.6.1.2.4.2.6.1.11

tnSvcEndPointTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.19 · 1 row entry · 26 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSvcEndPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnSvcEndPointTable' 
The tnSvcEndPointTable has an entry for each service endpoint
configured on this system.
tnSvcEndPointEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.19.1
Each row entry represents a particular service endpoint.
Entries are created/deleted by the user.
Indexes
Column Syntax OID
tnSvcEndPointName
The value of tnSvcEndPointName specifies the name of the service
endpoint.
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.1
tnSvcEndPointRowStatus
The value of tnSvcEndPointRowStatus is used for the creation and
deletion of service endpoints.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.2
tnSvcEndPointDescription
The value of tnSvcEndPointDescription specifies the textual
description of this service endpoint.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.3
tnSvcEndPointRevertTime
The value of tnSvcEndPointRevertTime specifies the time to wait
before reverting back to the primary spoke-sdp defined on this
service endpoint, after having failed over to a backup
spoke-sdp. When the value is '-1', th…
secondsInteger32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.4
tnSvcEndPointTxActiveType
The value of tnSvcEndPointTxActiveType indicates the type of
end-point object that is current transmit active.
Enumeration
Enumerated Values:
0none
1sap
2sdpBind
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.5
tnSvcEndPointTxActivePortId
The value of tnSvcEndPointTxActivePortId indicates the Port ID
of the SAP that is transmit active. This object is only valid
when tnSvcEndPointTxActiveType is 'sap'.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.6
tnSvcEndPointTxActiveEncap
The value of tnSvcEndPointTxActiveEncap indicates the
encapsulation value of the SAP that is transmit active. This
object is only valid when tnSvcEndPointTxActiveType is 'sap'.
TN-TC-MIBTmnxEncapVal .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.7
tnSvcEndPointTxActiveSdpId
The value of tnSvcEndPointTxActiveSdpId indicates the SDP bind
ID of the SDP bind that is transmit active. This object is only
valid when tnSvcEndPointTxActiveType is 'sdpBind'.
TN-TC-MIBSdpBindId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.8
tnSvcEndPointForceSwitchOver
The value of tnSvcEndPointForceSwitchOver specifies whether to
force a switchover of the active SDP bind. When it is set to
'doAction', the SDP bind specified by
tnSvcEndPointForceSwitchOverSdpId will become active.
TN-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.9
tnSvcEndPointForceSwitchOverSdpId
The value of tnSvcEndPointForceSwitchOverSdpId specifies the SDP
bind to switch over to when tnSvcEndPointForceSwitchOver is set
to 'doAction'. If the value of this object is non default, it
indicates that a forced swit…
TN-TC-MIBSdpBindIdr/w
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.10
tnSvcEndPointActiveHoldDelay
The value of tnSvcEndPointActiveHoldDelay specifies the amount
of time in deci-seconds to hold the active state before going
into the standby state when a local MC-LAG SAP goes down.
deci-secondsUnsigned32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.11
tnSvcEndPointIgnoreStandbySig
The value of tnSvcEndPointIgnoreStandbySig specifies whether the
local internal tasks will take into account the 'pseudo-wire
forwarding standby' bit received from the LDP peer which is
normally ignored.

…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.12
tnSvcEndPointMacPinning
The value of tnSvcEndPointMacPinning specifies whether or not
MAC address pinning is active on this end-point.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.13
tnSvcEndPointMacLimit
The value of the object tnSvcEndPointMacLimit specifies the
maximum number of learned and static entries allowed for this
end-point.

The value 0 means: no limit for this end-point.

When the…
Integer32r/w
Constraints:
range: 0-511999
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.14
tnSvcEndPointSuppressStandbySig
The value of the object tnSvcEndPointSuppressStandbySig specifies
whether the 'pseudo wire forwarding standby' bit will be sent
to the LDP peer whenever the spoke SDP
'tnSvcEndPointTxActiveSdpId' is selected as standby.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.15
tnSvcEndPointRevertTimeCountDn
The value of tnSvcEndPointRevertTimeCountDn indicates the timer
count down before reverting back to the primary spoke-sdp
defined on this service endpoint, after having failed over to
a backup spoke-sdp.

…
secondsInteger32
Constraints:
range: -1-600
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.16
tnSvcEndPointTxActiveChangeCount
The value of tnSvcEndPointTxActiveChangeCount indicates the
number of times active transmit change has taken place in this
endpoint.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.17
tnSvcEndPointTxActiveLastChange
The value of tnSvcEndPointTxActiveLastChange indicates the
value of sysUpTime at the time of the last active transmit
change in this endpoint.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.18
tnSvcEndPointTxActiveUpTime
The value of tnSvcEndPointTxActiveUpTime indicates the active
'up' time (in hundredths of a second) of the end-point object
that is current transmit active.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.19
tnSvcEndPointMCEPId
The value of tnSvcEndPointMCEPId specifies the multi-chassis
end-point identifier assigned to this endpoint.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.20
tnSvcEndPointMCEPPeerAddrType
The value of tnSvcEndPointMCEPPeerAddrType specifies the
address type of tnSvcEndPointMCEPPeerAddr object.

An 'inconsistentValue' error is returned if this object is
set to non-default value when tnSvcEnd…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.21
tnSvcEndPointMCEPPeerAddr
The value of tnSvcEndPointMCEPPeerAddr specifies the
IP address of multi-chassis end-point peer.

An 'inconsistentValue' error is returned if this object is
set to non-default value when tnSvcEndPointMCEPI…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.22
tnSvcEndPointMCEPPeerName
The value of tnSvcEndPointMCEPPeerName specifies the name of
multi-chassis end-point peer
TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName.

An 'inconsistentValue' error is returned if this object is
set to non-d…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.23
tnSvcEndPointBlockOnMeshFail
The value of tnSvcEndPointBlockOnMeshFail specifies that the
operational status of spoke-SDPs in the endpoint will be
affected by the operational status of associated mesh SDPs in
this service.

If there a…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.24
tnSvcEndPointMCEPPsvModeActive
The value of tnSvcEndPointMCEPPsvModeActive indicates whether
passive-mode behavior is currently active on this multi-chassis
end-point.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.25
tnSvcEndPointStandbySigMaster
The value of tnSvcEndPointStandbySigMaster specifies whether
PW standby bit will be sent to T-LDP peer whenever spoke-SDPs
of this endpoint are selected as standby.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.26

tnSvcTlsBackboneInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.27 · 1 row entry · 9 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSvcTlsBackboneInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnSvcTlsBackboneInfoTable' 
The tnSvcTlsBackboneInfoTable augments the tnSvcTlsInfoTable.
The table allows the operator to modify attributes of the
Provider Backbone Bridging feature.
tnSvcTlsBackboneInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.27.1
Each row entry contains objects that allows the
modification of the Provider Backbone Bridging feature
for a specific TLS service
Indexes
No indexes recorded
Column Syntax OID
tnSvcTlsBackboneSrcMac
The value of tnSvcTlsBackboneSrcMac specifies the Backbone
Source MAC-Address for Provider Backbone Bridging packets.
If not provisioned, it defaults to the loopback chassis
MAC-Address.

An inconsistentVa…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.1
tnSvcTlsBackboneVplsSvcId
The value of tnSvcTlsBackboneVplsSvcId specifies the
Backbone-VPLS service associated with this service.

An inconsistentValue error is returned if an attempt
is made to set this object when the value of
t…
TN-TC-MIBTmnxServIdr/w
Type Constraints:
range: 0..2147483650
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.2
tnSvcTlsBackboneVplsSvcISID
The value of the object tnSvcTlsBackboneVplsSvcISID specifies
a 24 bit (0..16777215) service instance identifier for
this service. As part of the Provider Backbone Bridging
frames, it is used at the destination PE as a
…
SvcISIDr/w
Type Constraints:
range: -1..16777215
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.3
tnSvcTlsBackboneOperSrcMac
The value of tnSvcTlsBackboneOperSrcMac indicates the
operational Backbone Source MAC-Address for Provider
Backbone Bridging packets.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.4
tnSvcTlsBackboneOperVplsSvcISID
The value of tnSvcTlsBackboneOperVplsSvcISID indicates
operational value of service instance identifier used for
this service. As part of the Provider Backbone Bridging
frames, it is used at the destination PE as a
demu…
SvcISID
Type Constraints:
range: -1..16777215
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.5
tnSvcTlsBackboneLDPMacFlush
The value of tnSvcTlsBackboneLDPMacFlush specifies whether
'LDP MAC withdraw all from me' message received in the
'iVpls' domain should attempt to generate a new 'LDP MAC
withdraw all from me' message in the 'bVpls' dom…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.6
tnSvcTlsBackboneVplsStp
The value of tnSvcTlsBackboneVplsStp specifies whether
STP is enabled on the Backbone VPLS specified by
tnSvcTlsBackboneVplsSvcId.

An inconsistentValue error is returned if an attempt
is made to set this …
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.7
tnSvcTlsBackboneLDPMacFlushNotMine
The value of tnSvcTlsBackboneLDPMacFlush specifies whether
'LDP MAC withdraw' message received in the 'iVpls' domain
should attempt to generate a new 'LDP MAC withdraw' message
in the 'bVpls' domain. Generation of the '…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.8
tnSvcTlsBackboneUseSapBMac
The value of tnSvcTlsBackboneUseSapBMac specifies
whether to enable dual-homing to use source Backbone
MAC-Address allocated for multi-homed SAPs (assigned
to an MC-LAG) in the related service with tnSvcVplsType
set to …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.2.27.1.9

tnTlsMFibTable

table
.1.3.6.1.4.1.7483.6.1.2.4.2.28 · 1 row entry · 13 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnTlsMFibTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SERV-MIB::tnTlsMFibTable' 
tnTlsMFibTable contains the Multicast FIB for this Tls.
tnTlsMFibEntry row .1.3.6.1.4.1.7483.6.1.2.4.2.28.1
An entry in the tnTlsMFibTable. Each entry indicates
whether traffic from a certain source to a certain
multicast destination (group) needs to be forwarded or
blocked on the indicated SAP/SDP.
Indexes
Column Syntax OID
tnTlsMFibEntryType
The value of the object tnTlsMFibEntryType indicates
the type of this tnTlsMFibEntry.

- macBased: entry used for macBased multicast, as for
MLD-snooping and 802.1ak MMRP.
- ipBased: entry use…
Enumeration
Enumerated Values:
1ipBased
2macBased
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.1
tnTlsMFibGrpMacAddr
The value of the object tnTlsMFibGrpMacAddr indicates the
MAC address for which this table entry contains
information.

This value is only meaningful if the value of
tnTlsMFibEntryType is 'macBased (2)'.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.2
tnTlsMFibGrpInetAddrType
The value of the object tnTlsMFibGrpInetAddrType indicates
the type of tnTlsMFibGrpInetAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.3
tnTlsMFibGrpInetAddr
The value of the object tnTlsMFibGrpInetAddr indicates
the multicast destination IP address for which this table
entry contains information.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.4
tnTlsMFibSrcInetAddrType
The value of tnTlsMFibSrcInetAddrType indicates the type
of tnTlsMFibSrcInetAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.5
tnTlsMFibSrcInetAddr
The value of tnTlsMFibSrcInetAddr indicates the unicast
source IP address for which this table entry contains
information.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.6
tnTlsMFibLocale
The value of tnTlsMFibLocale indicates if the information in
this entry pertains to a 'sap' or to an 'sdp'.
MfibLocation
Type Values:
1sap
2sdp
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.7
tnTlsMFibPortId
The value of tnTlsMFibPortId indicates, together with the
object tnTlsMFibEncapValue, the SAP for which this entry
contains information.

This value of this object is only meaningful when the
value of tnTl…
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.8
tnTlsMFibEncapValue
The value of tnTlsMFibEncapValue indicates, together with
the object tnTlsMFibPortId, the SAP for which this entry
contains information.

This value of this object is only meaningful when the
value of tnTl…
TN-TC-MIBTmnxEncapVal .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.9
tnTlsMFibSdpId
The value of tnTlsMFibSdpId indicates, together with
the object tnTlsMFibVcId, the SDP Binding for which this
entry contains information.

This value of this object is only meaningful when the
value of tnT…
SdpId
Type Constraints:
range: 0..17407
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.10
tnTlsMFibVcId
The value of tnTlsMFibVcId indicates, together with
the object tnTlsMFibSdpId, the SDP Binding for which this
entry contains information.

This value of this object is only meaningful when the
value of tnT…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.11
tnTlsMFibFwdOrBlk
The value of tnTlsMFibFwdOrBlk indicates if traffic for the
indicated (S,G) pair will be blocked or forwarded on the
indicated SAP or SDP.
MfibGrpSrcFwdOrBlk
Type Values:
1forward
2block
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.12
tnTlsMFibSvcId
The value of tnTlsMFibSvcId indicates the TLS service
to which the indicated SAP or SDP belongs.
TN-TC-MIBTmnxServId
Type Constraints:
range: 0..2147483650
 .1.3.6.1.4.1.7483.6.1.2.4.2.28.1.13