tnSvcEndPointBlockOnMeshFail
TN-SERV-MIB ·
.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.24
Object
The value of tnSvcEndPointBlockOnMeshFail specifies that the
operational status of spoke-SDPs in the endpoint will be
affected by the operational status of associated mesh SDPs in
this service.
If there are no mesh SDPs in the service, value of this
object is ignored.
When this object is set to 'true', then the operational
status of the spoke-SDPs in the endpoint will be 'down' until
the operational status of at least one mesh SDP in this service
is 'up'.
When set to 'false', the operational status of the spoke-SDPs
in the endpoint will not be affected by the operational status
of any mesh SDPs in the service.
Context
- MIB
- TN-SERV-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.4.2.19.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnSvcEndPointEntry
- Table
- tnSvcEndPointTable
- Siblings
- 25
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnSvcEndPointName The value of tnSvcEndPointName specifies the name of the service
endpoint. | column | TN-TC-MIBTNamedItem | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.1 |
| tnSvcEndPointForceSwitchOverSdpId The value of tnSvcEndPointForceSwitchOverSdpId specifies the SDP
bind to switch over to when tnSvcEndPointForceSwitchOver is set
to 'doAction'. If the value of this object is non … | column | TN-TC-MIBSdpBindId | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.10 |
| tnSvcEndPointActiveHoldDelay The value of tnSvcEndPointActiveHoldDelay specifies the amount
of time in deci-seconds to hold the active state before going
into the standby state when a local MC-LAG SAP goes do… | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.11 |
| tnSvcEndPointIgnoreStandbySig The value of tnSvcEndPointIgnoreStandbySig specifies whether the
local internal tasks will take into account the 'pseudo-wire
forwarding standby' bit received from the LDP peer wh… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.12 |
| tnSvcEndPointMacPinning The value of tnSvcEndPointMacPinning specifies whether or not
MAC address pinning is active on this end-point. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.13 |
| tnSvcEndPointMacLimit The value of the object tnSvcEndPointMacLimit specifies the
maximum number of learned and static entries allowed for this
end-point.
The value 0 means: no limit for… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.14 |
| tnSvcEndPointSuppressStandbySig The value of the object tnSvcEndPointSuppressStandbySig specifies
whether the 'pseudo wire forwarding standby' bit will be sent
to the LDP peer whenever the spoke SDP
'tnSvcEndPoi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.15 |
| tnSvcEndPointRevertTimeCountDn The value of tnSvcEndPointRevertTimeCountDn indicates the timer
count down before reverting back to the primary spoke-sdp
defined on this service endpoint, after having failed ove… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.16 |
| tnSvcEndPointTxActiveChangeCount The value of tnSvcEndPointTxActiveChangeCount indicates the
number of times active transmit change has taken place in this
endpoint. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.17 |
| tnSvcEndPointTxActiveLastChange The value of tnSvcEndPointTxActiveLastChange indicates the
value of sysUpTime at the time of the last active transmit
change in this endpoint. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.18 |
| tnSvcEndPointTxActiveUpTime The value of tnSvcEndPointTxActiveUpTime indicates the active
'up' time (in hundredths of a second) of the end-point object
that is current transmit active. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.19 |
| tnSvcEndPointRowStatus The value of tnSvcEndPointRowStatus is used for the creation and
deletion of service endpoints. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.2 |
| tnSvcEndPointMCEPId The value of tnSvcEndPointMCEPId specifies the multi-chassis
end-point identifier assigned to this endpoint. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.20 |
| tnSvcEndPointMCEPPeerAddrType The value of tnSvcEndPointMCEPPeerAddrType specifies the
address type of tnSvcEndPointMCEPPeerAddr object.
An 'inconsistentValue' error is returned if this object i… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.21 |
| tnSvcEndPointMCEPPeerAddr The value of tnSvcEndPointMCEPPeerAddr specifies the
IP address of multi-chassis end-point peer.
An 'inconsistentValue' error is returned if this object is
set to n… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.22 |
| tnSvcEndPointMCEPPeerName The value of tnSvcEndPointMCEPPeerName specifies the name of
multi-chassis end-point peer
TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName.
An 'inconsistentValue' error is… | column | TN-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.23 |
| tnSvcEndPointMCEPPsvModeActive The value of tnSvcEndPointMCEPPsvModeActive indicates whether
passive-mode behavior is currently active on this multi-chassis
end-point. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.25 |
| tnSvcEndPointStandbySigMaster The value of tnSvcEndPointStandbySigMaster specifies whether
PW standby bit will be sent to T-LDP peer whenever spoke-SDPs
of this endpoint are selected as standby. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.26 |
| tnSvcEndPointDescription The value of tnSvcEndPointDescription specifies the textual
description of this service endpoint. | column | TN-TC-MIBServObjDesc | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.3 |
| tnSvcEndPointRevertTime The value of tnSvcEndPointRevertTime specifies the time to wait
before reverting back to the primary spoke-sdp defined on this
service endpoint, after having failed over to a back… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.4 |
| tnSvcEndPointTxActiveType The value of tnSvcEndPointTxActiveType indicates the type of
end-point object that is current transmit active. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.5 |
| tnSvcEndPointTxActivePortId The value of tnSvcEndPointTxActivePortId indicates the Port ID
of the SAP that is transmit active. This object is only valid
when tnSvcEndPointTxActiveType is 'sap'. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.6 |
| tnSvcEndPointTxActiveEncap The value of tnSvcEndPointTxActiveEncap indicates the
encapsulation value of the SAP that is transmit active. This
object is only valid when tnSvcEndPointTxActiveType is 'sap'. | column | TN-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.7 |
| tnSvcEndPointTxActiveSdpId The value of tnSvcEndPointTxActiveSdpId indicates the SDP bind
ID of the SDP bind that is transmit active. This object is only
valid when tnSvcEndPointTxActiveType is 'sdpBind'. | column | TN-TC-MIBSdpBindId | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.8 |
| tnSvcEndPointForceSwitchOver The value of tnSvcEndPointForceSwitchOver specifies whether to
force a switchover of the active SDP bind. When it is set to
'doAction', the SDP bind specified by
tnSvcEndPointForc… | column | TN-TC-MIBTmnxActionType | .1.3.6.1.4.1.7483.6.1.2.4.2.19.1.9 |