svcNetIngIPFilterId

TIMETRA-SERV-MIB · .1.3.6.1.4.1.6527.3.1.2.4.2.167.1.5

Object

The value of the object svcNetIngIPFilterId if different from '0'
specifies the ID of configured IP filter which will be deployed on all
line cards with network port interfaces. The filter applies to all
traffic arriving on auto-bind and/or explicit spoke SDPs within this
VPRN. This filter will not be applied to VPRN spoke-SDP interfaces,
SAPs or R-VPLS endpoints.
              
Network port L3 service aware filters do not support flowspec,
TPSDA(Radius/Gx injected entries in a pre-reserved filter range), LI
(cannot use filter inside LI infrastructure nor have LI sources within
the VPRN filter).
              
Values outside of range 0..65535 are reserved for entries dynamically
created by the system and cannot be used in any SNMP SET operation.

Context

MIB
TIMETRA-SERV-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.4.2.167.1.5
Type
column
Access
readwrite
Status
current
Default
0
Parent
svcVprnInfoEntry
Groups
1

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-SERV-MIB::svcNetIngIPFilterId'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-SERV-MIB::svcNetIngIPFilterId.<svcId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-SERV-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-SERV-MIB::svcNetIngIPFilterId'

Syntax

Source
TIMETRA-FILTER-MIBTConfigOrVsdFilterID
Base type
Unsigned32
Type Description
The identification number of a filter. Any value greater than
0x0000FFFF (65535) indicates a filter that was dynamically created
(auto-generated) by the system and as such cannot be used as part of
any SNMP SET operation.
          
- The range 0x00000001 .. 0x0000FFFF (1 .. 65535)
  indicates a regular configuration originated filter.
          
- The range 0x04000001 .. 0x0400FFFF (67108865 .. 67174399)
  indicates a filter managed by a VSD controller. In this case
  the last 16 bits indicate the ID of the VSD filter.
          
- The value 0 indicates an invalid filter-id (e.g. no filter applied
  on a particular endpoint).

Values & Constraints

Type Constraints
range: 0..65535 range: 67108865..67174399

Conformance