TIMETRA-SERV-MIB Table View

A table that contains customer information. There is an entry in this
table corresponding to the default customer. This entry cannot be
edited or deleted, and it is used as the default customer for newly
created services.

custInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.3.1

Information about a specific customer.

Indexes

custId

Column	Syntax	OID
custId Customer identifier. This ID must be unique within a service domain.	TIMETRA-TC-MIBTmnxCustIdNoZero Type Constraints: range: 1..2147483647 Description: A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain.	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.1
custRowStatus The value of the object custRowStatus specifies the status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.2
custDescription The value of the object custDescription specifies optional, generic information about this customer in a displayable format.	ServObjDescr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: ASCII string used to describe various service objects.	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.3
custContact The value of the object custContact specifies the name of the primary contact person for this customer.	ServObjDescr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: ASCII string used to describe various service objects.	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.4
custPhone The value of the object custPhone specifies the phone/pager number used to reach the primary contact person.	ServObjDescr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: ASCII string used to describe various service objects.	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.5
custLastMgmtChange The value of the object custLastMgmtChange indicates the value of the object sysUpTime at the time of the most recent management-initiated change to this customer.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.6
custCreationOrigin The value of the object custCreationOrigin indicates the mechanism used to create this customer.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 13 evpn 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 21 vmhost 22 dhcpClient 23 ipsec 24 esa 25 pfcpCups 26 manual-mci Description: The TmnxCreateOrigin indicates the entity that created the entry.	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.7
custName The value of the object custName indicates the name of the customer.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..64 Description: The long name of an item, or an empty string. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control chara…	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.8

A table that contains ingress QoS scheduler statistics for the
customer multi service site.

custMultiSvcSiteIngStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.5.1

Ingress statistics about a specific customer multi service site
ingress scheduler.

Indexes

custId custMultSvcSiteName custIngQosSchedName

Column	Syntax	OID
custIngQosSchedName The index of the ingress QoS scheduler of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.1
custIngQosSchedStatsForwardedPackets The value of the object custIngQosSchedStatsForwardedPackets indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.2
custIngQosSchedStatsForwardedOctets The value of the object custIngQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.3

A table that contains egress QoS scheduler statistics for the customer
multi service site.

custMultiSvcSiteEgrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.6.1

Egress statistics about a specific customer multi service site egress
scheduler.

Indexes

custId custMultSvcSiteName custEgrQosSchedName

Column	Syntax	OID
custEgrQosSchedName The index of the egress QoS scheduler of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.1
custEgrQosSchedStatsForwardedPackets The value of the object custEgrQosSchedStatsForwardedPackets indicates number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.2
custEgrQosSchedStatsForwardedOctets The value of the object custEgrQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.3

The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler
statistics for the customer multi service site.

custIngQosPortIdSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.7.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress scheduler. Entries are created when a
scheduler policy is applied to an MSS.

Indexes

custId custMultSvcSiteName custIngQosPortIdSchedName custIngQosAssignmentPortId

Column	Syntax	OID
custIngQosPortIdSchedName The value of custIngQosPortIdSchedName is used as an index of the ingress QoS scheduler of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.1
custIngQosAssignmentPortId The value of custIngQosAssignmentPortId is used as an index of the ingress QoS scheduler/arbiter of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps…	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.2
custIngQosPortSchedFwdPkts The value of custIngQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.3
custIngQosPortSchedFwdOctets The value of custIngQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.4

The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler
statistics for the customer multi service site.

custEgrQosPortIdSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.8.1

Each row entry represents the egress statistics for a customer
multi-service-site egress scheduler. Entries are created when a
scheduler policy is applied to an MSS.

Indexes

custId custMultSvcSiteName custEgrQosPortIdSchedName custEgrQosAssignmentPortId

Column	Syntax	OID
custEgrQosPortIdSchedName The value of custEgrQosPortIdSchedName is used as an index of the egress QoS scheduler of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.1
custEgrQosAssignmentPortId The value of custEgrQosAssignmentPortId is used as an index of the egress QoS scheduler/arbiter of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/…	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.2
custEgrQosPortSchedFwdPkts The value of custEgrQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.3
custEgrQosPortSchedFwdOctets The value of custEgrQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.4

A table that contains ingress QoS scheduler statistics for the
customer multi service site.

custMssIngQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.9.1

Ingress statistics about a specific customer multi service site
ingress scheduler.

Indexes

custId custMultSvcSiteName custMssIngQosSName

Column	Syntax	OID
custMssIngQosSName The value of custMssIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.1
custMssIngQosSRowStatus The value of custMssIngQosSRowStatus controls the creation and deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.2
custMssIngQosSLastMgmtChange The value of custMssIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.3
custMssIngQosSOverrideFlags The value of custMssIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribu…	TVirtSchedAttributer/w Type Values: 0 cir 1 pir 2 summedCir 3 weight 4 cirWeight Description: Indicates attributes of a virtual scheduler	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.4
custMssIngQosSPIRobsolete The value of custMssIngQosSPIR specifies the desired PIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by custMssIngQosSPIRHi and custMssIngQosSPIRLo.	kilo bits per secondTIMETRA-TC-MIBTHPolVirtualSchePIRRater/w Type Constraints: range: -1 range: 1..800000000 Description: The PIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.5
custMssIngQosSCIRobsolete The value of custMssIngQosSCIR specifies the desired CIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by custMssIngQosSCIRHi and custMssIngQosSCIRLo.	kilo bits per secondTIMETRA-TC-MIBTHPolVirtualScheCIRRater/w Type Constraints: range: -1..800000000 Description: The CIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.6
custMssIngQosSSummedCIR The value of custMssIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssIngQosSCIR) loses its meanin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.7
custMssIngQosSPIRHi The value of custMssIngQosSPIRHi specifies upper 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with custMssIngQosSPIRLo, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.8
custMssIngQosSPIRLo The value of custMssIngQosSPIRLo specifies lower 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with custMssIngQosSPIRHi, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.9
custMssIngQosSCIRHi The value of custMssIngQosSCIRHi specifies upper 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with custMssIngQosSCIRLo, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.10
custMssIngQosSCIRLo The value of custMssIngQosSCIRLo specifies lower 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with custMssIngQosSCIRHi, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.11
custMssIngQosSParentWeight The value of custMssIngQosSParentWeight specifies the weight that needs to be used by this virtual scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.12
custMssIngQosSParentCIRWeight The value of custMssIngQosSParentCIRWeight specifies the weight that needs to be used until the committed rate by this virtual scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.13

A table that contains egress QoS scheduler statistics for the customer
multi service site.

custMssEgrQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.10.1

Egress statistics about a specific customer multi service site egress
scheduler.

Indexes

custId custMultSvcSiteName custMssEgrQosSName

Column	Syntax	OID
custMssEgrQosSName The value of custMssEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.1
custMssEgrQosSRowStatus The value of custMssEgrQosSRowStatus controls the creation and deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.2
custMssEgrQosSLastMgmtChange The value of custMssEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.3
custMssEgrQosSOverrideFlags The value of custMssEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribu…	TVirtSchedAttributer/w Type Values: 0 cir 1 pir 2 summedCir 3 weight 4 cirWeight Description: Indicates attributes of a virtual scheduler	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.4
custMssEgrQosSPIRobsolete The value of custMssEgrQosSPIR specifies the desired PIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by custMssEgrQosSPIRHi and custMssEgrQosSPIRLo.	kilo bits per secondTIMETRA-TC-MIBTHPolVirtualSchePIRRater/w Type Constraints: range: -1 range: 1..800000000 Description: The PIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.5
custMssEgrQosSCIRobsolete The value of custMssEgrQosSCIR specifies the desired CIR value for this virtual scheduler. This object is obsoleted in 11.0 Release. It is replaced by custMssEgrQosSCIRHi and custMssEgrQosSCIRLo.	kilo bits per secondTIMETRA-TC-MIBTHPolVirtualScheCIRRater/w Type Constraints: range: -1..800000000 Description: The CIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.6
custMssEgrQosSSummedCIR The value of custMssEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssEgrQosSCIR) loses its meanin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.7
custMssEgrQosSPIRHi The value of custMssEgrQosSPIRHi specifies upper 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with custMssEgrQosSPIRLo, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.8
custMssEgrQosSPIRLo The value of custMssEgrQosSPIRLo specifies lower 32 bits of the pir-rate allowed for this virtual scheduler. This value should always be set along with custMssEgrQosSPIRHi, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.9
custMssEgrQosSCIRHi The value of custMssEgrQosSCIRHi specifies upper 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with custMssEgrQosSCIRLo, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.10
custMssEgrQosSCIRLo The value of custMssEgrQosSCIRLo specifies lower 32 bits of the cir-rate allowed for this virtual scheduler. This value should always be set along with custMssEgrQosSCIRHi, otherwise an 'inconsistentValue…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.11
custMssEgrQosSParentWeight The value of custMssEgrQosSParentWeight specifies the weight that needs to be used by this virtual scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.12
custMssEgrQosSParentCIRWeight The value of custMssEgrQosSParentCIRWeight specifies the weight that needs to be used until the committed rate by this virtual scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.13

A table that contains ingress QoS scheduler statistics for the
customer multi service site, organized by scheduler policy.
          
This table is obsoleted in 14.0 release.

custMultiSvcSiteIngSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.11.1

Ingress statistics about a specific customer multi service site egress
scheduler. Entries are created when a scheduler policy of a MSS is
replaced with another one due to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName TIMETRA-QOS-MIBtSchedulerPolicyName TIMETRA-QOS-MIBtVirtualSchedulerName

Column	Syntax	OID
custIngSchedPlcyStatsFwdPktobsolete The value of the object custIngSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.11.1.1
custIngSchedPlcyStatsFwdOctobsolete The value of the object custIngSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.11.1.2

A table that contains egress QoS scheduler statistics for the customer
multi service site, organized by scheduler policy.
          
This table is obsoleted in 14.0 release.

custMultiSvcSiteEgrSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.12.1

Egress statistics about a specific customer multi service site egress
scheduler. Entries are created when a scheduler policy of a MSS is
replaced with another one due to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName TIMETRA-QOS-MIBtSchedulerPolicyName TIMETRA-QOS-MIBtVirtualSchedulerName

Column	Syntax	OID
custEgrSchedPlcyStatsFwdPktobsolete The value of the object custEgrSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.12.1.1
custEgrSchedPlcyStatsFwdOctobsolete The value of the object custEgrSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.12.1.2

The custMultiSvcSiteIngSchedPlcyPortStatsTable contains ingress QoS
scheduler statistics for the customer multi service site, organized by
scheduler policy.
          
This table is obsoleted in 14.0 release.

custMultiSvcSiteIngSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.13.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress scheduler. Entries are created when a
scheduler policy of a MSS is replaced with another one due to
Time-Of-Day policies.

Indexes

custId custMultSvcSiteName TIMETRA-QOS-MIBtSchedulerPolicyName TIMETRA-QOS-MIBtVirtualSchedulerName custIngSchedPlcyPortStatsPort

Column	Syntax	OID
custIngSchedPlcyPortStatsPortobsolete The value of custIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag…	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.1
custIngSchedPlcyPortStatsFwdPktobsolete The value of custIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.2
custIngSchedPlcyPortStatsFwdOctobsolete The value of custIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.3

The custMultiSvcSiteEgrSchedPlcyPortStatsTable contains egress QoS
scheduler statistics for the customer multi service site, organized by
scheduler policy.
          
This table is obsoleted in 14.0 release.

custMultiSvcSiteEgrSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.14.1

Each entry represents the egress statistics about a specific customer
multi service site egress scheduler. Entries are created when a
scheduler policy of a MSS is replaced with another one due to
Time-Of-Day policies.

Indexes

custId custMultSvcSiteName TIMETRA-QOS-MIBtSchedulerPolicyName TIMETRA-QOS-MIBtVirtualSchedulerName custEgrSchedPlcyPortStatsPort

Column	Syntax	OID
custEgrSchedPlcyPortStatsPortobsolete The value of custEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/…	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.1
custEgrSchedPlcyPortStatsFwdPktobsolete The value of custEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.2
custEgrSchedPlcyPortStatsFwdOctobsolete The value of custEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.3

The custMssIngQosArbitStatsTable contains ingress QoS arbiter
statistics for the customer multi service site, organized by arbiter.

custMssIngQosArbitStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.15.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress arbiter.

Indexes

custId custMultSvcSiteName custMssIngQosArbitName

Column	Syntax	OID
custMssIngQosArbitName The value of custMssIngQosArbitName is used as an index of the ingress QoS arbiter of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.1
custMssIngQosArbitStatsFwdPkts The value of custMssIngQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.2
custMssIngQosArbitStatsFwdPktsLo The value of custMssIngQosArbitStatsFwdPktsLo indicates the lower 32 bits of custMssIngQosArbitStatsFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.3
custMssIngQosArbitStatsFwdPktsHi The value of custMssIngQosArbitStatsFwdPktsHi indicates the higher 32 bits of custMssIngQosArbitStatsFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.4
custMssIngQosArbitStatsFwdOcts The value of custMssIngQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site ingress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.5
custMssIngQosArbitStatsFwdOctsLo The value of custMssIngQosArbitStatsFwdOctsLo indicates the lower 32 bits of custMssIngQosArbitStatsFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.6
custMssIngQosArbitStatsFwdOctsHi The value of custMssIngQosArbitStatsFwdOctsHi indicates the higher 32 bits of custMssIngQosArbitStatsFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.15.1.7

The custMssEgrQosArbitStatsTable contains egress QoS arbiter
statistics for the customer multi service site, organized by arbiter.

custMssEgrQosArbitStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.16.1

Each entry represents the egress statistics about a specific customer
multi service site egress arbiter.

Indexes

custId custMultSvcSiteName custMssEgrQosArbitName

Column	Syntax	OID
custMssEgrQosArbitName The value of custMssEgrQosArbitName is used as an index of the egress QoS arbiter of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.1
custMssEgrQosArbitStatsFwdPkts The value of custMssEgrQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.2
custMssEgrQosArbitStatsFwdPktsLo The value of custMssEgrQosArbitStatsFwdPktsLo indicates the lower 32 bits of custMssEgrQosArbitStatsFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.3
custMssEgrQosArbitStatsFwdPktsHi The value of custMssEgrQosArbitStatsFwdPktsHi indicates the higher 32 bits of custMssEgrQosArbitStatsFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.4
custMssEgrQosArbitStatsFwdOcts The value of custMssEgrQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site egress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.5
custMssEgrQosArbitStatsFwdOctsLo The value of custMssEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits of custMssEgrQosArbitStatsFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.6
custMssEgrQosArbitStatsFwdOctsHi The value of custMssEgrQosArbitStatsFwdOctsHi indicates the higher 32 bits of custMssEgrQosArbitStatsFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.16.1.7

The custIngQosPortIdArbitStatsTable contains ingress QoS arbiter
statistics for the customer multi service site.

custIngQosPortIdArbitStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.17.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress arbiter.

Indexes

custId custMultSvcSiteName custIngQosPortIdArbitName custIngQosAssignmentPortId

Column	Syntax	OID
custIngQosPortIdArbitName The value of custIngQosPortIdArbitName is used as an index of the ingress QoS arbiter of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.1
custIngQosPortIdArbitFwdPkts The value of custIngQosPortIdArbitFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.2
custIngQosPortIdArbitFwdPktsLo The value of custIngQosPortIdArbitFwdPktsLo indicates the lower 32 bits of custIngQosPortIdArbitFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.3
custIngQosPortIdArbitFwdPktsHi The value of custIngQosPortIdArbitFwdPktsHi indicates the higher 32 bits of custIngQosPortIdArbitFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.4
custIngQosPortIdArbitFwdOcts The value of custIngQosPortIdArbitFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site ingress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.5
custIngQosPortIdArbitFwdOctsLo The value of custIngQosPortIdArbitFwdOctsLo indicates the lower 32 bits of custIngQosPortIdArbitFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.6
custIngQosPortIdArbitFwdOctsHi The value of custIngQosPortIdArbitFwdOctsHi indicates the higher 32 bits of custIngQosPortIdArbitFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.17.1.7

The custEgrQosPortIdArbitStatsTable contains egress QoS arbiter
statistics for the customer multi service site.

custEgrQosPortIdArbitStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.18.1

Each row entry represents the egress statistics for a customer
multi-service-site egress arbiter.

Indexes

custId custMultSvcSiteName custEgrQosPortIdArbitName custEgrQosAssignmentPortId

Column	Syntax	OID
custEgrQosPortIdArbitName The value of custEgrQosPortIdArbitName is used as an index of the egress QoS arbiter of this customer multi service site.	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.1
custEgrQosPortIdArbitFwdPkts The value of custEgrQosPortIdArbitFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.2
custEgrQosPortIdArbitFwdPktsLo The value of custEgrQosPortIdArbitFwdPktsLo indicates the lower 32 bits of custEgrQosPortIdArbitFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.3
custEgrQosPortIdArbitFwdPktsHi The value of custEgrQosPortIdArbitFwdPktsHi indicates the higher 32 bits of custEgrQosPortIdArbitFwdPkts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.4
custEgrQosPortIdArbitFwdOcts The value of custEgrQosPortIdArbitFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site egress arbiter policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.5
custEgrQosPortIdArbitFwdOctsLo The value of custEgrQosPortIdArbitFwdOctsLo indicates the lower 32 bits of custEgrQosPortIdArbitFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.6
custEgrQosPortIdArbitFwdOctsHi The value of custEgrQosPortIdArbitFwdOctsHi indicates the higher 32 bits of custEgrQosPortIdArbitFwdOcts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.1.18.1.7

A table that contains basic service information.

svcBaseInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.2.1

Basic information about a specific service.

Indexes

svcId

Column	Syntax	OID
svcId The value of the object svcId specifies the Service identifier. This value should be unique within the service domain.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381 range: 2148278387..2148282482 Description: A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.1
svcRowStatus This value of the object svcRowStatus specifies the status of this row. To delete an entry from this table, the corresponding service must be administratively down, have no SAP's defined on it, and have …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.2
svcType The value of the object svcType specifies the service type: e.g. epipe, tls, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	ServTyper/w Type Values: 0 unknown 1 epipe 3 tls 4 vprn 5 ies 6 mirror 9 ipipe 10 cpipe 11 intTls 12 evpnIsaTls Description: This textual convention is used to specify the type of a given service.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.3
svcCustId The value of the object svcCustId specifies the ID of the customer who owns this service. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	TIMETRA-TC-MIBTmnxCustIdr/w Type Constraints: range: 0..2147483647 Description: A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain. The value 0 is used as the null ID.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.4
svcIpRouting The value of the object svcIpRouting specifies, for a 'tls' service, whether IP routing is enabled. For 'epipe', 'apipe', 'fpipe', 'ipipe' and 'cpipe' services, this object cannot be set and has the value 'disabled', wh…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.5
svcDescription The value of the object svcDescription specifiers an optional, generic information about this service.	ServObjDescr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: ASCII string used to describe various service objects.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.6
svcMtu The value of the object svcMtu specifies the largest frame size (in octets) that this service can handle. Setting svcMtu to a value of zero (0), causes the agent to recalculate the default MTU size. …	Integer32r/w Constraints: range: 0-9782	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.7
svcAdminStatus The value of the object svcAdminStatus specifies the desired state of this service.	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down Description: ServiceAdminStatus data type is an enumerated integer that describes the values used to identify the administrative state of a service.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.8
svcOperStatus The value of the object svcOperStatus indicates the operating state of this service. The requirements for a service to be operationally up depend on the service type: epipe, apipe, fpipe, ipipe and cpipe …	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down Description: ServiceOperStatus data type is an enumerated integer that describes the values used to identify the current operational state of a service.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.9
svcNumSaps The value of the object svcNumSaps indicates the number of SAPs defined on this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.10
svcNumSdps The value of the object svcNumSdps indicates the number of SDPs bound to this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.11
svcLastMgmtChange The value of of the object svcLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this service.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.12
svcDefMeshVcIdobsolete The value of the object svcDefMeshVcId specifies, only in services that accept mesh SDP bindings, the VC ID portion of the sdpBindId index of each mesh SDP binding defined in the service. The default value of this objec…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.13
svcVpnId The value of the object svcVpnId specifies the VPN ID assigned to this service. The value of this object can be specified only when the row is created.	VpnIdr/w Type Constraints: range: 0..2147483647 Description: A number used to identify a VPN. In general each service corresponds to a single VPN, but under some circumstances a VPN may be composed of multiple services.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.14
svcVRouterId The value of the object svcVRouterId specifies, for a IES or VPRN service the associated virtual router instance where its interfaces are defined. This object has a special significance for the VPRN servi…	TIMETRA-TC-MIBTmnxVRtrIDOrZeror/w Type Constraints: range: 0..10240 Description: A number used to identify a virtual router instance in the system. The number 0 will have special significance in the context the TC is used.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.15
svcAutoBindobsolete The value of the object svcAutoBind specifies, for a VPRN service, the type of lookup to be used by the routing instance if no SDP to the destination exists. The svcAutoBind object has been obsoleted and …	Enumerationr/w Enumerated Values: 1 none 2 gre 3 ldp 4 rsvp-te 5 mpls 6 mpls-gre	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.16
svcLastStatusChange The value of the object svcLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his service.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.17
svcVllType The value of the object svcVllType specifies, for a apipe, fpipe or cpipe service, the type of pseudo-wire to be signalled for the service. The default for this object depends on the service type: 'atmSdu' for apipes, …	Enumerationr/w Enumerated Values: 1 undef 12 satopE1 13 satopT1 14 satopE3 15 satopT3 16 cesopsn 17 cesopsnCas	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.18
svcMgmtVpls The value of the object svcMgmtVpls specifies, only if svcType = 'tls' whether or not the service is a management vpls. If set to false the service is acting as a regular VPLS service. If set to true, the service is ac…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.19
svcRadiusDiscovery The value of the object svcRadiusDiscovery specifies whether RADIUS auto-discovery is enabled on this service.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.20
svcRadiusUserNameTypeobsolete The value of the object svcRadiusUserNameType specifies whether RADIUS user name is vpn-id or router-distinguisher. By default, the value of this object is 'none'. svcRadiusUserNameType and svcRadiusUser…	Enumerationr/w Enumerated Values: 0 none 1 vpn-id 2 router-distinguisher	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.21
svcRadiusUserNameobsolete The value of the object svcRadiusUserName specifies the RADIUS user name. svcRadiusUserNameType specifies the type of the username and has to be set along with svcRadiusUserName when svcRadiusUserName can either be a …	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.22
svcVcSwitching The value of the object svcVcSwitching specifies if the PW switching signalling is used for the Spokes configured under the service. This object can only be specified when the row is created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.23
svcRadiusPEDiscPolicyobsolete The value of the object svcRadiusPEDiscPolicy specifies the RADIUS PE Discovery Policy name.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.24
svcRadiusDiscoveryShutdownobsolete The value of svcRadiusDiscoveryShutdown specifies the desired administrative state for the RADIUS auto-discovery server. When the server is 'down' the operational state of the server is disabled. By defau…	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down Description: ServiceAdminStatus data type is an enumerated integer that describes the values used to identify the administrative state of a service.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.25
svcVplsType Backbone VPLS ('bVpls') refers to the B-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It represents the Multi-point tunneling component that multiplexes multiple Customer VPNs (ISIDs) …	Enumerationr/w Enumerated Values: 1 none 2 bVpls 3 iVpls	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.26
svcNumMcStandbySaps The value of the object svcNumMcStandbySaps indicates the number of SAPs defined on this service on a port which is in multi-chassis standby mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.27
svcName The value of the svcName specifies the name of the service. This value should be unique within the service domain.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..64 Description: The long name of an item, or an empty string. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control chara…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.29
svcInterASMvpnobsolete The value of the object svcInterASMvpn specifies if the configured VPRN service is used for inter-AS MVPN or not. If the value of the object is set to 'true', the VPRN service is used for inter-AS MVPN on…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.30
svcHashLabel The value of svcHashLabel specifies whether the use of hash label is enabled or not on this service.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.31
svcTmplUsed The value of the svcTmplUsed indicates the name of the service template used to create this service. A value of empty string indicates that this service was not created using a service template.	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.32
svcCtrlSvcId The value of the object svcCtrlSvcId indicates the Service identifier of the service controlling this service. A value of '0' indicates that this service is not controlled by another service.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381 range: 2148278387..2148282482 Description: A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.33
svcCreationOrigin The value of svcCreationOrigin indicates the protocol or mechanism which created this service.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 13 evpn 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 21 vmhost 22 dhcpClient 23 ipsec 24 esa 25 pfcpCups 26 manual-mci Description: The TmnxCreateOrigin indicates the entity that created the entry.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.34
svcNumMHStandbySaps The value of the object svcNumMHStandbySaps indicates the number of SAPs defined on this service which are multi-home standby SAPs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.37
svcVsdDomainNameobsolete The value of the object svcVsdDomainName indicates the VSD Domain that is associated with this service.	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.39
svcIsTestSvc The value of the object svcIsTestSvc specifies whether this service is a test service. An 'inconsistentValue' error is returned if this object is changed to a different value after service is already crea…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.40
svcTlsModeEtree The value of the object svcTlsModeEtree specifies whether etree mode is enabled on this service. An 'inconsistentValue' error is returned if this object is changed to a different value after service is al…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.41
svcNumEvpnMHStandbySaps The value of the object svcNumEvpnMHStandbySaps indicates the number of SAPs defined on this service which are evpn multi-homed standby SAPs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.42
svcLogServicesAllEvents The value of the object svcLogServicesAllEvents indicates if logger events are visible from all virtual routers including Base in this service vprn log.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.43
svcFlexibleCrossConnect The value of the object svcFlexibleCrossConnect indicates if the service is in flexible cross connect mode for EVPN VPWS. This object can only be specified when the row is created	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.44

A table that contains TLS service information.

svcTlsInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.3.1

TLS specific information about a service.

Indexes

svcId

Column	Syntax	OID
svcTlsMacLearning The value of the object svcTlsMacLearning specifies whether the MAC learning process is enabled in this TLS.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.1
svcTlsDiscardUnknownDest The value of the object svcTlsDiscardUnknownDest specifies whether frames received with an unknown destination MAC are discarded in this TLS.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.2
svcTlsFdbTableSize The value of the object svcTlsFdbTableSize specifies the maximum number of learned and static entries allowed in the FDB of this service. The maximum value of svcTlsFdbTableSize depends on the platform/ch…	Integer32r/w Constraints: range: 1-511999	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.3
svcTlsFdbNumEntries The value of the object svcTlsFdbNumEntries indicates the current number of entries allocated in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.4
svcTlsFdbNumStaticEntries The value of the object svcTlsFdbNumStaticEntries indicates the current number of static entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.5
svcTlsFdbLocalAgeTime The value of the object svcTlsFdbLocalAgeTime specifies the number of seconds used to age out TLS FDB entries learned on local SAPs.	Integer32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.6
svcTlsFdbRemoteAgeTime The value of the object svcTlsFdbRemoteAgeTime specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs.	Integer32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.7
svcTlsStpAdminStatus The value of the object svcTlsStpAdminStatus specifies the administrative state of the Spanning Tree Protocol instance associated with this service.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabledAdminState data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. It is to be used for admin state leafs.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.8
svcTlsStpPriority The value of the object svcTlsStpPriority specifies the priority of the Spanning Tree Protocol instance associated with this service. It is used as the highest 4 bits of the Bridge ID included in the Configuration BPDU…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.9
svcTlsStpBridgeAddress The value of the object svcTlsStpBridgeAddress indicates the MAC address used to identify this bridge in the network. It is used as the last six octets of the Bridge ID included in the Configuration BPDUs generated by …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.10
svcTlsStpTimeSinceTopologyChange The value of the object svcTlsStpTimeSinceTopologyChange indicates the time (in centiseconds) since the last time a topology change was detected by the Spanning Tree Protocol instance associated with this service.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.11
svcTlsStpTopologyChanges The value of the object svcTlsStpTopologyChanges indicates the total number of topology changes detected by the Spanning Tree Protocol instance associated with this service since the management entity was last reset or …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.12
svcTlsStpDesignatedRoot The value of the object svcTlsStpDesignatedRoot indicates the bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as t…	BridgeId Type Constraints: range: 8 Description: The Bridge-Identifier used by the Spanning Tree Protocol to uniquely identify a bridge. The first two octets represent the bridge priority (in big endian format) while the remaining six octets represent the main MAC add…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.13
svcTlsStpRootCost The value of the object svcTlsStpRootCost indicates the cost of the path to the root bridge as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.14
svcTlsStpRootPort The value of the object svcTlsStpRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.15
svcTlsStpMaxAge The value of the object svcTlsStpMaxAge indicates the maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded. This is the actual value that this bridge is currently…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.16
svcTlsStpHelloTime The value of the object svcTlsStpHelloTime indicates the amount of time between the transmission of Configuration BPDUs. This is the actual value that this bridge is currently using.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.17
svcTlsStpHoldTimeobsolete The value of the object svcTlsStpHoldTime indicates the interval length during which no more than two Configuration BPDUs shall be transmitted by this bridge. This object is no longer used. It is replaced by the object …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.18
svcTlsStpForwardDelay The value of the object svcTlsStpForwardDelay indicates how fast a port changes its state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning stat…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.19
svcTlsStpBridgeMaxAge The value of the object svcTlsStpBridgeMaxAge specifies the value that all bridges should use for 'MaxAge' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 6-40	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.20
svcTlsStpBridgeHelloTime The value of the object svcTlsStpBridgeHelloTime specifies the value that all bridges should use for 'HelloTime' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.21
svcTlsStpBridgeForwardDelay The value of the object svcTlsStpBridgeForwardDelay specifies the value that all bridges should use for 'ForwardDelay' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 4-30	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.22
svcTlsStpOperStatus The value of the object svcTlsStpOperStatus indicates the operating status of the Spanning Tree Protocol instance associated with this service.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.30
svcTlsStpVirtualRootBridgeStatus The value of the object svcTlsStpVirtualRootBridgeStatus indicates the operating status of the Virtual Root Bridge of the Spanning Tree Protocol instance associated with this service. The status of the Virtual Root Br…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.31
svcTlsMacAgeing The value of the object svcTlsMacAgeing specifies whether the MAC aging process is enabled in this TLS.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.32
svcTlsStpTopologyChangeActive The value of the object svcTlsStpTopologyChangeActive indicates, when set to 'true', that a topology change is currently in progress.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.33
svcTlsFdbTableFullHighWatermark The value of the object svcTlsFdbTableFullHighWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.34
svcTlsFdbTableFullLowWatermark The value of the object svcTlsFdbTableFullLowWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be cleared by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.35
svcTlsVpnId The value of the object svcTlsVpnId indicates the VPN ID of the associated TLS service.	VpnId Type Constraints: range: 0..2147483647 Description: A number used to identify a VPN. In general each service corresponds to a single VPN, but under some circumstances a VPN may be composed of multiple services.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.36
svcTlsCustId The value of the object svcTlsCustId indicates the Customer ID of the associated TLS service.	TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647 Description: A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain. The value 0 is used as the null ID.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.37
svcTlsStpVersion The value of the object svcTlsStpVersion specifies the version of Spanning Tree Protocol the bridge is currently running. The value 'rstp' corresponds to the Rapid Spanning Tree Protocol specified in IEE…	Enumerationr/w Enumerated Values: 2 rstp 3 compDot1w 4 dot1w 5 mstp 6 pmstp	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.38
svcTlsStpHoldCount The value of the object svcTlsStpHoldCount specifies the maximum number of BPDUs that are transmitted in any 'HelloTime' interval. The value used by the bridge to limit the maximum transmission rate of BPDUs.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.39
svcTlsStpPrimaryBridge The value of the object svcTlsStpPrimaryBridge indicates the BridgeId of the bridge that acts as the primary bridge, being the gateway from the core mesh towards the root bridge.	BridgeId Type Constraints: range: 8 Description: The Bridge-Identifier used by the Spanning Tree Protocol to uniquely identify a bridge. The first two octets represent the bridge priority (in big endian format) while the remaining six octets represent the main MAC add…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.40
svcTlsStpBridgeInstanceId The value of the object svcTlsStpBridgeInstanceId indicates a 12 bit value chosen by the the system. It is part of the STP bridge Id, which consists of 8 octets: - 4 highest bits of octet 1: the bridge priority (ref…	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.41
svcTlsStpVcpOperProtocol The value of the object svcTlsStpVcpOperProtocol indicates whether stp, rstp or mstp is running on this VCP. If the protocol is not enabled on this VCP, the value notApplicable is returned.	StpProtocol Type Values: 0 notApplicable 1 stp 2 rstp 3 mstp Description: indicates all possible version of the stp protocol.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.42
svcTlsMacMoveMaxRate The value of the object svcTlsMacMoveMaxRate specifies the maximum rate at which MACs can be relearned in this TLS service, before the SAP where the moving MAC was last seen is automatically disabled in order to protect…	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.43
svcTlsMacMoveRetryTimeout The value of the object svcTlsMacMoveRetryTimeout specifies the time in seconds to wait before a SAP that has been disabled after exceeding the maximum relearn rate is re-enabled. A value of zero indicat…	Unsigned32r/w Constraints: range: 0-600	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.44
svcTlsMacMoveAdminStatus The value of the object svcTlsMacMoveAdminStatus specifies the administrative state of the MAC movement feature associated with this service.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabledAdminState data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. It is to be used for admin state leafs.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.45
svcTlsMacRelearnOnly The value of the object svcTlsMacRelearnOnly indicates when set to 'true' that either the FDB table of this TLS service is full, or that the maximum system wide number of MACs supported by the agent has been reached, an…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.46
svcTlsMfibTableSize The value of the object svcTlsMfibTableSize specifies the maximum number of entries allowed in the MFIB table of this service. If the value is 0, then there is no limit. Allowable maximum value for this …	Integer32r/w Constraints: range: 0-40959	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.47
svcTlsMfibTableFullHighWatermark The value of the object svcTlsMfibTableFullHighWatermark specifies the utilization of the MFIB table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.48
svcTlsMfibTableFullLowWatermark The value of the object svcTlsMfibTableFullLowWatermark specifies utilization of the MFIB table of this TLS service at which a table full alarm will be cleared by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.49
svcTlsMacFlushOnFail The value of the object svcTlsMacFlushOnFail specifies whether a special mac-flush is sent when a port or sap becomes operational down.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.50
svcTlsStpRegionName The value of the object svcTlsStpRegionName specifies the MSTP region name. Together with region revision and VLAN-to-instance assignment it defines the MSTP region.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.51
svcTlsStpRegionRevision The value of the object svcTlsStpRegionRevision specifies the MSTP region revision number. Together with region name and VLAN-to-instance assignment it defines the MSTP region.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.52
svcTlsStpBridgeMaxHops The value of the object svcTlsStpBridgeMaxHops specifies the maximum number of hops (known as 'MaxHops' in 802.1Q).	Integer32r/w Constraints: range: 1-40	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.53
svcTlsStpCistRegionalRoot The value of the object svcTlsStpCistRegionalRoot indicates the bridge identifier of the regional root of the CIST spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This va…	BridgeId Type Constraints: range: 8 Description: The Bridge-Identifier used by the Spanning Tree Protocol to uniquely identify a bridge. The first two octets represent the bridge priority (in big endian format) while the remaining six octets represent the main MAC add…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.54
svcTlsStpCistIntRootCost The value of the object svcTlsStpCistIntRootCost indicates the cost of the path to the CIST regional root bridge as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.55
svcTlsStpCistRemainingHopCount The value of the object svcTlsStpCistRemainingHopCount specifies the remaining number of hops.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.56
svcTlsStpCistRegionalRootPort The value of the object svcTlsStpCistRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.57
svcTlsFdbNumLearnedEntries The value of the object svcTlsFdbNumLearnedEntries indicates the current number of learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.58
svcTlsFdbNumOamEntries The value of the object svcTlsFdbNumOamEntries indicates the current number of OAM entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.59
svcTlsFdbNumDhcpEntries The value of the object svcTlsFdbNumDhcpEntries indicates the current number of dhcp-learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.60
svcTlsFdbNumHostEntries The value of the object svcTlsFdbNumHostEntries indicates the current number of host-learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.61
svcTlsShcvAction The value of the object svcTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.	TIMETRA-TC-MIBTmnxSubShcvActionr/w Type Values: 1 alarm 2 remove Description: The TmnxSubShcvAction data type is an enumerated integer that describes the values used to identify the action taken when Subscriber Host Connectivity Verification (SHCV) failed.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.62
svcTlsShcvSrcIp The value of the object svcTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.63
svcTlsShcvSrcMac The value of the object svcTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.64
svcTlsShcvInterval The value of the object svcTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking.	minutesTIMETRA-TC-MIBTmnxSubShcvIntervalr/w Type Constraints: range: 0..6000 Description: The TmnxSubShcvInterval data type is a number that specifies the interval in minutes between connectivity checks. The value zero means no connectivity checking.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.65
svcTlsPriPortsCumulativeFactor The value of the object svcTlsPriPortsCumulativeFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must …	Unsigned32r/w Constraints: range: 3-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66
svcTlsSecPortsCumulativeFactor The value of the object svcTlsSecPortsCumulativeFactor specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate mus…	Unsigned32r/w Constraints: range: 2-9	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.67
svcTlsL2ptTermEnabled The value of the object svcTlsL2ptTermEnabled indicates if 'L2PT-termination' and/or 'Bpdu-translation' is in use in this service by at least one SAP or spoke SDP Bind. If the value is 'true', it means that at least one…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.68
svcTlsPropagateMacFlush The value of svcTlsPropagateMacFlush specifies whether 'MAC flush' messages received from the given LDP are propagated to all spoke-SDPs and mesh-SDPs within the context of this VPLS service. The propagation will follow…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.69
svcTlsMrpAdminStatus The value of the object svcTlsMrpAdminStatus specifies whether the Multiple Registration Protocol (MRP) is enabled in this TLS.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabledAdminState data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. It is to be used for admin state leafs.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.70
svcTlsMrpMaxAttributes The value of the object svcTlsMrpMaxAttributes specifies maximum number of MMRP attributes supported in this TLS. In most cases the default value is 2048 MRP attributes. For some platform and chassis type…	Unsigned32r/w Constraints: range: 1-8192	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.71
svcTlsMrpAttributeCount The value of the object svcTlsMrpAttributeCount indicates the number of MMRP attributes currently associated to the TLS by either being registered or declared. Note that an 'iVpls' service (with svcVplsTy…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.72
svcTlsMrpFailedRegisterCount The value of the object svcTlsMrpFailedRegisterCount indicates number of failed MRP attribute registrations in this TLS.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.73
svcTlsMcPathMgmtPlcyName The value of svcTlsMcPathMgmtPlcyName specifies the multicast policy name configured on this service.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.74
svcTlsMrpFloodTime The value of the object svcTlsMrpFloodTime specifies the amount of time in seconds after a status change in the TLS during which traffic is flooded. Once that time expires, traffic will be delivered according to the MR…	secondsUnsigned32r/w Constraints: range: 0-0 range: 3-600	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.75
svcTlsMrpAttrTblHighWatermark The value of the object svcTlsMrpAttrTblHighWatermark specifies the utilization of the MRP attribute table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.76
svcTlsMrpAttrTblLowWatermark The value of the object svcTlsMrpAttrTblLowWatermark specifies utilization of the MRP attribute table of this TLS service at which a table full alarm will be cleared by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.77
svcTlsMacMoveNumRetries The value of the object svcTlsMacMoveNumRetries specifies the number of times retries are performed for re-enabling the SAP/SDP. A value of zero indicates unlimited number of retries.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.78
svcTlsMacSubNetLen The value of the object svcTlsMacSubNetLen specifies the number of bits to be considered when performing MAC-Learning or MAC-Switching.	Integer32r/w Constraints: range: 24-48	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.79
svcTlsSendFlushOnBVplsFail The value of the object svcTlsSendFlushOnBVplsFail specifies whether a special 'MAC flush' is sent in the local 'iVpls' following a failure of SAP/Endpoint/SDP in the 'bVpls'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.80
svcTlsPropMacFlushFromBVpls The value of the object svcTlsPropMacFlushFromBVpls specifies whether to propagate any 'MAC flush' from 'bVpls' into the local 'iVpls'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.81
svcTlsMacNotifInterval The value of svcTlsMacNotifInterval specifies time interval between subsequent MAC notification messages. The default value for this object indicates that the value is inherited from svcMacNotifInterval.	decisecondsUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.82
svcTlsMacNotifCount The value of svcTlsMacNotifCount specifies number of MAC notification messages to be sent. The default value for this object indicates that the value is inherited from svcMacNotifCount.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.83
svcTlsMacNotifAdminState The value of svcTlsMacNotifAdminState specifies whether MAC notification messages should be sent.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabledAdminState data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. It is to be used for admin state leafs.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.84
svcTlsPerSvcHashing The value of svcTlsPerSvcHashing specifies service-level hashing for Ethernet services.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.85
svcTlsAllowIpIfBinding The value of the object svcTlsAllowIpIfBinding specifies whether to allow IP interface binding on this service.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.86
svcTlsShcvRetryTimeout The value of the object svcTlsShcvRetryTimeout specifies the timeout in seconds before a connectivity check retransmission.	secondsTIMETRA-TC-MIBTmnxSubShcvRetryTimeoutr/w Type Constraints: range: 10..60 Description: The TmnxSubShcvRetryTimeout data type is a number that specifies the timeout in seconds before a connectivity check retransmission.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.87
svcTlsShcvRetryCount The value of the object svcTlsShcvRetryCount specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each inter…	TIMETRA-TC-MIBTmnxSubShcvRetryCountr/w Type Constraints: range: 2..29 Description: The TmnxSubShcvRetryTimeout data type is a number that specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.88
svcTlsTempFloodTime The value of the object svcTlsTempFloodTime specifies duration of time traffic will be flooded on a TLS status change in this TLS. Value of '-1' disables this flooding behavior.	secondsInteger32r/w Constraints: range: -1--1 range: 3-600	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.89
svcTlsTempFloodActive The value of the object svcTlsTempFloodActive indicates whether temporary flooding is currently active in this TLS.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.90
svcTlsTempFloodChangeCount The value of the object svcTlsTempFloodChangeCount specifies the number of times temporary flooding status changed from inactive to active in this TLS. The value of this object resets to zero when tempora…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.91
svcTlsShcvPolicyIpv4 The value of svcTlsShcvPolicyIpv4 specifies the Subscriber Host Connectivity Verification (SHCV) policy for IPv4 only. A non empty value must correspond to a conceptual row in the TIMETRA-SUBSCRIBER-MGMT-…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.92
svcTlsMcastIpv6SnpgScope The value of svcTlsMcastIpv6SnpgScope specifies the flooding scope of IPv6 multicast traffic when pim-snooping is enabled in this TLS. If set to 'macBased' only the bottom 32 bits of the destination IPv6 …	Enumerationr/w Enumerated Values: 1 sgBased 2 macBased	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.93
svcTlsSelLearnedFdb The value of svcTlsSelLearnedFdb specifies whether the learned MAC addresses in the VPLS can be programmed selectively on the line cards on which the service is configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.94
svcTlsFdbNumEntriesInUse The value of the object svcTlsFdbNumEntriesInUse indicates the current number of entries currently in use in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.95
svcTlsInfoLastMgmtChange The value of svcTlsInfoLastMgmtChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.96
svcTlsRvplsIpIfSvcId When svcTlsAllowIpIfBinding is enabled on this VPLS and the VPLS is bound to a VPRN/IES Interface, this value indicates the VPRN/IES Service to which that routed vpls interface belongs.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381 range: 2148278387..2148282482 Description: A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.97
svcTlsRvplsIpIfIndex When svcTlsAllowIpIfBinding is enabled on this VPLS and the VPLS is bound to a VPRN/IES Interface, this value indicates the VPRN/IES Interface Index of that routed vpls interface.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.98
svcTlsVcpState The value of svcTlsVcpState indicates the state of the VCP.	TStpPortState Type Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken 7 discarding Description: The value used to specify the port state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.99