svcEndPointTxActiveUpTime
TIMETRA-SERV-MIB ·
.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19
Object
column
SNMPv2-SMITimeTicks
The value of svcEndPointTxActiveUpTime indicates the active 'up' time (in centiseconds) of the endpoint object that is current transmit active.
Context
- MIB
- TIMETRA-SERV-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- svcEndPointEntry
- Table
- svcEndPointTable
- Siblings
- 33
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| svcEndPointName The value of svcEndPointName specifies the name of the service
endpoint. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.1 |
| svcEndPointForceSwitchOverSdpId The value of svcEndPointForceSwitchOverSdpId specifies the SDP bind to
switch over to when svcEndPointForceSwitchOver is set to 'doAction'.
If the value of this object is non defa… | column | TIMETRA-TC-MIBSdpBindId | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10 |
| svcEndPointActiveHoldDelay The value of svcEndPointActiveHoldDelay specifies the amount of time
in deciseconds to hold the active state before going into the standby
state when a local MC-LAG SAP goes down. | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.11 |
| svcEndPointIgnoreStandbySig The value of svcEndPointIgnoreStandbySig specifies whether the local
internal tasks will take into account the 'pseudo-wire forwarding
standby' bit received from the LDP peer whic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.12 |
| svcEndPointMacPinning The value of svcEndPointMacPinning specifies whether or not MAC
address pinning is active on this endpoint. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.13 |
| svcEndPointMacLimit The value of the object svcEndPointMacLimit specifies the maximum
number of learned and static entries allowed for this endpoint.
The value 0 means: no limit for th… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.14 |
| svcEndPointSuppressStandbySig The value of the object svcEndPointSuppressStandbySig specifies
whether the 'pseudo wire forwarding standby' bit will be sent to the
LDP peer whenever the spoke SDP 'svcEndPointTx… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.15 |
| svcEndPointRevertTimeCountDn The value of svcEndPointRevertTimeCountDn indicates the timer count
down before reverting back to the primary spoke-sdp defined on this
service endpoint, after having failed over … | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.16 |
| svcEndPointTxActiveChangeCount The value of svcEndPointTxActiveChangeCount indicates the number of
times active transmit change has taken place in this endpoint. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.17 |
| svcEndPointTxActiveLastChange The value of svcEndPointTxActiveLastChange indicates the value of
sysUpTime at the time of the last active transmit change in this
endpoint. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.18 |
| svcEndPointRowStatus The value of svcEndPointRowStatus is used for the creation and
deletion of service endpoints. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.2 |
| svcEndPointMCEPId The value of svcEndPointMCEPId specifies the multi-chassis endpoint
identifier assigned to this endpoint. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.20 |
| svcEndPointMCEPPeerAddrType The value of svcEndPointMCEPPeerAddrType specifies the address type of
svcEndPointMCEPPeerAddr object.
An 'inconsistentValue' error is returned if this object is se… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.21 |
| svcEndPointMCEPPeerAddr The value of svcEndPointMCEPPeerAddr specifies the IP address of
multi-chassis endpoint peer.
An 'inconsistentValue' error is returned if this object is set to
non-… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.22 |
| svcEndPointMCEPPeerName The value of svcEndPointMCEPPeerName specifies the name of
multi-chassis endpoint peer TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName.
An 'inconsistentValue' error is re… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.23 |
| svcEndPointBlockOnMeshFail The value of svcEndPointBlockOnMeshFail specifies that the operational
status of spoke-SDPs in the endpoint will be affected by the
operational status of associated mesh SDPs in t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.24 |
| svcEndPointMCEPPsvModeActive The value of svcEndPointMCEPPsvModeActive indicates whether
passive-mode behavior is currently active on this multi-chassis
endpoint. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.25 |
| svcEndPointStandbySigMaster The value of svcEndPointStandbySigMaster specifies whether PW standby
bit will be sent to T-LDP peer whenever spoke-SDPs of this endpoint
are selected as standby. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.26 |
| svcEndPointStandbySigSlave The value of svcEndPointStandbySigSlave specifies whether transmission
of any spoke in the endpoint will be blocked when the spoke receives
standby status notification from its pe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.27 |
| svcEndPointForceSwitchOvrSdpFec The value of svcEndPointForceSwitchOvrSdpFec specifies the
multi-segment pseudo-wire provide-edge identifier to switch over to
when svcEndPointForceSwitchOver is set to 'doAction'… | column | TIMETRA-TC-MIBTmnxSpokeSdpIdOrZero | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.28 |
| svcEndPointTxActiveSdpFec The value of svcEndPointTxActiveSdpFec indicates the multi- segment
pseudo-wire provider-edge identifier that is transmit active. This
object is only valid when svcEndPointTxActiv… | column | TIMETRA-TC-MIBTmnxSpokeSdpIdOrZero | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.29 |
| svcEndPointDescription The value of svcEndPointDescription specifies the textual description
of this service endpoint. | column | ServObjDesc | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.3 |
| svcEndPointRestProtSrcMac The value of the object svcEndPointRestProtSrcMac specifies how the
agent will handle relearn requests for protected MAC addresses
received on the SDP belonging to this endpoint.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.30 |
| svcEndPointRestProtSrcMacAction The value of the object svcEndPointRestProtSrcMacAction indicates the
action to take whenever a relearn request for a protected MAC is
received on the SDP belonging to this endpoi… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.31 |
| svcEndPointAutoLearnMacProtect The value of svcEndPointAutoLearnMacProtect specifies whether to
enable automatic population of the MAC protect list with source MAC
addresses learned on the SDP associated with t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.32 |
| svcEndPointCreationOrigin The value of svcEndPointCreationOrigin indicates the origin mechanism
used to create this endpoint. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.33 |
| svcEPTxActiveBgpEvpnMplsInstId The svcEPTxActiveBgpEvpnMplsInstId indicates the set egress binds in
the bgp-instance that is transmit active. This object is only valid
when svcEndPointTxActiveType is 'bgpEvpnMp… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.34 |
| svcEndPointRevertTime The value of svcEndPointRevertTime specifies the time to wait before
reverting back to the primary spoke-sdp defined on this service
endpoint, after having failed over to a backup… | column | seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.4 |
| svcEndPointTxActiveType The value of svcEndPointTxActiveType indicates the type of endpoint
object that is current transmit active. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.5 |
| svcEndPointTxActivePortId The value of svcEndPointTxActivePortId indicates the Port ID of the
SAP that is transmit active. This object is only valid when
svcEndPointTxActiveType is 'sap'. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.6 |
| svcEndPointTxActiveEncap The value of svcEndPointTxActiveEncap indicates the encapsulation
value of the SAP that is transmit active. This object is only valid
when svcEndPointTxActiveType is 'sap'. | column | TIMETRA-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.7 |
| svcEndPointTxActiveSdpId The value of svcEndPointTxActiveSdpId indicates the SDP bind ID of the
SDP bind that is transmit active. This object is only valid when
svcEndPointTxActiveType is 'sdpBind'. | column | TIMETRA-TC-MIBSdpBindId | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.8 |
| svcEndPointForceSwitchOver The value of svcEndPointForceSwitchOver specifies whether to force a
switchover of the active SDP bind. When it is set to 'doAction', the
SDP bind specified by svcEndPointForceSwi… | column | TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.9 |