svcEndPointForceSwitchOverSdpId

TIMETRA-SERV-MIB · .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10

Object

column r/w TIMETRA-TC-MIBSdpBindId

The value of svcEndPointForceSwitchOverSdpId specifies the SDP bind to
switch over to when svcEndPointForceSwitchOver is set to 'doAction'.
If the value of this object is non default, it indicates that a forced
switchover has taken place. Setting this object to the default value
clears any previous forced switchover.

Context

MIB: TIMETRA-SERV-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10
Type: column
Access: readwrite
Status: current
Parent: svcEndPointEntry
Table: svcEndPointTable
Siblings: 33

Syntax

TIMETRA-TC-MIBSdpBindId

Source: TIMETRA-TC-MIBSdpBindId
Base type: OctetString

Values & Constraints

Type Constraints

range: 8

Related Objects

Sibling Objects

Object	Type	Syntax	OID
svcEndPointName The value of svcEndPointName specifies the name of the service endpoint.	column	TIMETRA-TC-MIBTNamedItem	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.1`
svcEndPointActiveHoldDelay The value of svcEndPointActiveHoldDelay specifies the amount of time in deciseconds to hold the active state before going into the standby state when a local MC-LAG SAP goes down.	column	deciseconds Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.11`
svcEndPointIgnoreStandbySig The value of svcEndPointIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer whic…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.12`
svcEndPointMacPinning The value of svcEndPointMacPinning specifies whether or not MAC address pinning is active on this endpoint.	column	TIMETRA-TC-MIBTmnxEnabledDisabled	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.13`
svcEndPointMacLimit The value of the object svcEndPointMacLimit specifies the maximum number of learned and static entries allowed for this endpoint. The value 0 means: no limit for th…	column	Integer32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.14`
svcEndPointSuppressStandbySig The value of the object svcEndPointSuppressStandbySig specifies whether the 'pseudo wire forwarding standby' bit will be sent to the LDP peer whenever the spoke SDP 'svcEndPointTx…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.15`
svcEndPointRevertTimeCountDn The value of svcEndPointRevertTimeCountDn indicates the timer count down before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over …	column	seconds Integer32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.16`
svcEndPointTxActiveChangeCount The value of svcEndPointTxActiveChangeCount indicates the number of times active transmit change has taken place in this endpoint.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.17`
svcEndPointTxActiveLastChange The value of svcEndPointTxActiveLastChange indicates the value of sysUpTime at the time of the last active transmit change in this endpoint.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.18`
svcEndPointTxActiveUpTime The value of svcEndPointTxActiveUpTime indicates the active 'up' time (in centiseconds) of the endpoint object that is current transmit active.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19`
svcEndPointRowStatus The value of svcEndPointRowStatus is used for the creation and deletion of service endpoints.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.2`
svcEndPointMCEPId The value of svcEndPointMCEPId specifies the multi-chassis endpoint identifier assigned to this endpoint.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.20`
svcEndPointMCEPPeerAddrType The value of svcEndPointMCEPPeerAddrType specifies the address type of svcEndPointMCEPPeerAddr object. An 'inconsistentValue' error is returned if this object is se…	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.21`
svcEndPointMCEPPeerAddr The value of svcEndPointMCEPPeerAddr specifies the IP address of multi-chassis endpoint peer. An 'inconsistentValue' error is returned if this object is set to non-…	column	OctetString	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.22`
svcEndPointMCEPPeerName The value of svcEndPointMCEPPeerName specifies the name of multi-chassis endpoint peer TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName. An 'inconsistentValue' error is re…	column	TIMETRA-TC-MIBTNamedItemOrEmpty	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.23`
svcEndPointBlockOnMeshFail The value of svcEndPointBlockOnMeshFail specifies that the operational status of spoke-SDPs in the endpoint will be affected by the operational status of associated mesh SDPs in t…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.24`
svcEndPointMCEPPsvModeActive The value of svcEndPointMCEPPsvModeActive indicates whether passive-mode behavior is currently active on this multi-chassis endpoint.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.25`
svcEndPointStandbySigMaster The value of svcEndPointStandbySigMaster specifies whether PW standby bit will be sent to T-LDP peer whenever spoke-SDPs of this endpoint are selected as standby.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.26`
svcEndPointStandbySigSlave The value of svcEndPointStandbySigSlave specifies whether transmission of any spoke in the endpoint will be blocked when the spoke receives standby status notification from its pe…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.27`
svcEndPointForceSwitchOvrSdpFec The value of svcEndPointForceSwitchOvrSdpFec specifies the multi-segment pseudo-wire provide-edge identifier to switch over to when svcEndPointForceSwitchOver is set to 'doAction'…	column	TIMETRA-TC-MIBTmnxSpokeSdpIdOrZero	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.28`
svcEndPointTxActiveSdpFec The value of svcEndPointTxActiveSdpFec indicates the multi- segment pseudo-wire provider-edge identifier that is transmit active. This object is only valid when svcEndPointTxActiv…	column	TIMETRA-TC-MIBTmnxSpokeSdpIdOrZero	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.29`
svcEndPointDescription The value of svcEndPointDescription specifies the textual description of this service endpoint.	column	ServObjDesc	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.3`
svcEndPointRestProtSrcMac The value of the object svcEndPointRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses received on the SDP belonging to this endpoint. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.30`
svcEndPointRestProtSrcMacAction The value of the object svcEndPointRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on the SDP belonging to this endpoi…	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.31`
svcEndPointAutoLearnMacProtect The value of svcEndPointAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the SDP associated with t…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.32`
svcEndPointCreationOrigin The value of svcEndPointCreationOrigin indicates the origin mechanism used to create this endpoint.	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.33`
svcEPTxActiveBgpEvpnMplsInstId The svcEPTxActiveBgpEvpnMplsInstId indicates the set egress binds in the bgp-instance that is transmit active. This object is only valid when svcEndPointTxActiveType is 'bgpEvpnMp…	column	Integer32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.34`
svcEndPointRevertTime The value of svcEndPointRevertTime specifies the time to wait before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup…	column	seconds Integer32	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.4`
svcEndPointTxActiveType The value of svcEndPointTxActiveType indicates the type of endpoint object that is current transmit active.	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.5`
svcEndPointTxActivePortId The value of svcEndPointTxActivePortId indicates the Port ID of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'.	column	TIMETRA-TC-MIBTmnxPortID	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.6`
svcEndPointTxActiveEncap The value of svcEndPointTxActiveEncap indicates the encapsulation value of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'.	column	TIMETRA-TC-MIBTmnxEncapVal	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.7`
svcEndPointTxActiveSdpId The value of svcEndPointTxActiveSdpId indicates the SDP bind ID of the SDP bind that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sdpBind'.	column	TIMETRA-TC-MIBSdpBindId	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.8`
svcEndPointForceSwitchOver The value of svcEndPointForceSwitchOver specifies whether to force a switchover of the active SDP bind. When it is set to 'doAction', the SDP bind specified by svcEndPointForceSwi…	column	TIMETRA-TC-MIBTmnxActionType	`.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.9`