tSapIngressQueueCBS
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10
Object
The amount of reserved buffer space (in kilobytes) for the queue.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tSapIngressQueueEntry
- Table
- tSapIngressQueueTable
- Siblings
- 38
Syntax
TIMETRA-TC-MIBTBurstSize
- Source
- TIMETRA-TC-MIBTBurstSize
- Base type
Integer32
Values & Constraints
Type Constraints
range: -1..1048576
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapIngressQueue The queue ID is used as the secondary index to the table entry. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1 |
| tSapIngressQueueMBS obsolete The maximum amount of buffer space (in kilobytes) allowed for the
queue.
This object has been replaced with tSapIngressQueueMBSBytes object. | column | TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11 |
| tSapIngressQueueHiPrioOnly obsolete The percentage of buffer space for the queue, used exclusively by high
priority packets.
This object is obsoleted in 15.0 release and has been replaced with
tSapIng… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12 |
| tSapIngressQueuePIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13 |
| tSapIngressQueueCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14 |
| tSapIngressQueueAdminPIR obsolete The administrative PIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapIngressQueueAdminPIRHi
and tSapIngressQueueAdminPIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueuePIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15 |
| tSapIngressQueueAdminCIR obsolete The administrative CIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapIngressQueueAdminCIRHi
and tSapIngressQueueAdminCIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueueCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16 |
| tSapIngressQueueOperPIR obsolete The operating PIR. | column | kilobps TIMETRA-TC-MIBTPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17 |
| tSapIngressQueueOperCIR obsolete The operational value derived by computing the CIR value from the
administrative CIR and PIR values and their corresponding adaptation
rules. | column | kilobps TIMETRA-TC-MIBTCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18 |
| tSapIngressQueueLastChanged timestamp of last change to this row in tSapIngressQueueTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19 |
| tSapIngressQueueRowStatus Row Status of the entry. This allows creation/deletion of rows in this
table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2 |
| tSapIngressQueuePoliced tSapIngressQueuePoliced specifies that the out of profile traffic
feeding into the physical queue instance should be dropped.
tSapIngressQueuePoliced overrides the bandwidth speci… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20 |
| tSapIngressQueueMode tSapIngressQueueMode specifies the mode in which the queue is
operating. This attribute is associated with the queue at the time of
creation and cannot be modified thereafter. | column | TIMETRA-TC-MIBTQueueMode | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21 |
| tSapIngressQueuePoolName obsolete The value of tSapIngressQueuePoolName specifies the name of the pool
to be applied for SAP ingress queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22 |
| tSapIngressQueueMBSBytes The maximum amount of buffer space (in bytes) allowed for the queue. | column | bytes TIMETRA-TC-MIBTBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23 |
| tSapIngressQueueBurstLimit The value of tSapIngressQueueBurstLimit specifies the explicit shaping
burst size of a queue. | column | bytes TIMETRA-TC-MIBTBurstLimit | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24 |
| tSapIngressQueueAdminPIRPercent The administrative PIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapIngressQueueAdminPIRPercent is set to non-default value when the
object tSapIng… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25 |
| tSapIngressQueueAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapIngressQueueAdminCIRPercent is set to non-default value when the
object tSapIng… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26 |
| tSapIngressQueueRateType The value of tSapIngressQueueRateType specifies the type of Ingress
Queue rate.
When the value of the object is set to 'kbps', the ingresss queue rates
are specifie… | column | TIMETRA-TC-MIBTPolicerRateTypeWithRefLimit | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27 |
| tSapIngressQueueAdvCfgPolicy The value of tSapIngressQueueAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28 |
| tSapIngressQueuePktOffset The value of tSapIngressQueuePktOffset specifies the value, in bytes,
of the adjustment to make to the size of each packet for queue
accounting.
A 'wrongValue' erro… | column | bytes TIMETRA-TC-MIBTIngressQPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.29 |
| tSapIngressQueueParent The scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3 |
| tSapIngQDrpTailLowReductnMbs The value of tSapIngQDrpTailLowReductnMbs specifies the percentage at
which low drop tail is being reduced from the MBS specified by
tSapIngressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.30 |
| tSapIngressQueueAdminPIRHi The value of tSapIngressQueueAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.31 |
| tSapIngressQueueAdminPIRLo The value of tSapIngressQueueAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.32 |
| tSapIngressQueueAdminCIRHi The value of tSapIngressQueueAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.33 |
| tSapIngressQueueAdminCIRLo The value of tSapIngressQueueAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.34 |
| tSapIngressQueueFIRAdaptation The adaptation rule to be used while computing the operational FIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.35 |
| tSapIngressQueueAdminFIRPercent The administrative FIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapIngressQueueAdminFIRPercent is set to non-default value when the
object tSapIng… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.36 |
| tSapIngressQueueAdminFIRHi The value of tSapIngressQueueAdminFIRHi specifies the upper 32 bits of
the administrative FIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.37 |
| tSapIngressQueueAdminFIRLo The value of tSapIngressQueueAdminFIRLo specifies the lower 32 bits of
the administrative FIR specified by the user.
This value should always be set along with tSap… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.38 |
| tSapIngressQueueCIRNonProfiling tSapIngressQueueCIRNonProfiling specifies the CIR to affect the
scheduling priority of a queue but does not modify the profile of
packets depending on the specified CIR. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.39 |
| tSapIngressQueueLevel This specifies the level of priority while feeding to the parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4 |
| tSapIngressQueueWeight The weight that needs to be used by the scheduler to which this queue
would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5 |
| tSapIngressQueueCIRLevel This specifies the level of priority while feeding to the parent. The
level '0' means treat all offered load for this queue as for the above
CIR traffic. | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6 |
| tSapIngressQueueCIRWeight The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7 |
| tSapIngressQueueMCast This object specifies if this is a multicast queue or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8 |
| tSapIngressQueueExpedite tSapIngressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this at… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9 |