TIMETRA-QOS-MIB Table View

A list of all DSCP Names.  DSCP Name entries must
exist here and be active before they can be referenced
elsewhere (e.g. IP filter).

tDSCPNameEntry row .1.3.6.1.4.1.6527.3.1.2.16.1.1.1

Information about a particular DSCP Name, particularly the DSCP value.
It maps a DSCP Name into a DSCP value.

Some default entries are created by the agent. Default entries have
tDSCPNameStorageType permane…

Indexes

tDSCPName

Column	Syntax	OID
tDSCPName The name assigned to the DSCP Value.	TIMETRA-TC-MIBTDSCPName Based On: TNamedItem Description: The name of a Differential Services Code Point value.	.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1
tDSCPNameRowStatus Row Status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2
tDSCPNameStorageType The storage type of this row in the table.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3
tDSCPNameDscpValue The DSCP Value.	TIMETRA-TC-MIBTDSCPValuer/w Type Constraints: range: 0..63 Description: The value of a Differential Services Code Point.	.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4
tDSCPNameLastChanged timestamp of last change to this row in tDSCPNameTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5

A list of all Forwarding Class Names.  Forwarding Class Name entries
must exist here and be active before they can be referenced
elsewhere (e.g. qos queue).

tFCNameEntry row .1.3.6.1.4.1.6527.3.1.2.16.2.1.1

Information about a particular Forwarding Class Name, particularly the
Forwarding Class value.

Some default entries are created by the agent. Default entries have
tFCStorageType permanent, and can not be de…

Indexes

tFCName

Column	Syntax	OID
tFCName Forwarding class name.	TIMETRA-TC-MIBTFCName Based On: TNamedItem Description: The name of a Forwarding Class entry.	.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1
tFCRowStatus Row Status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2
tFCStorageType The storage type of this row in the table.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3
tFCValue FC Value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4
tFCNameLastChanged timestamp of last change to this row in tFCNameTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5

information about all sap-ingress policies' queues.

tSapIngressQueueEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.2.1

Information about a particular queue for a sap-ingress policy.

Queue (1) is the used as a default for unicast and queue (11) is used
as a default for multicast. Both these are created by the agent and
can b…

Indexes

tSapIngressIndex tSapIngressQueue

Column	Syntax	OID
tSapIngressQueue The queue ID is used as the secondary index to the table entry.	TIMETRA-TC-MIBTIngressQueueId Constraints: range: 1-32 Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngre…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1
tSapIngressQueueRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2
tSapIngressQueueParent The scheduler to which this queue would be feeding to.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3
tSapIngressQueueLevel This specifies the level of priority while feeding to the parent.	TIMETRA-TC-MIBTLevelr/w Type Constraints: range: 1..8 Description: The level of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4
tSapIngressQueueWeight The weight that needs to be used by the scheduler to which this queue would be feeding to.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5
tSapIngressQueueCIRLevel This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.	TIMETRA-TC-MIBTLevelOrDefaultr/w Type Constraints: range: 0..8 Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6
tSapIngressQueueCIRWeight The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7
tSapIngressQueueMCast This object specifies if this is a multicast queue or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8
tSapIngressQueueExpedite tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by…	Enumerationr/w Enumerated Values: 1 expedited 2 auto-expedited 3 non-expedited	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9
tSapIngressQueueCBS The amount of reserved buffer space (in kilobytes) for the queue.	TIMETRA-TC-MIBTBurstSizer/w Type Constraints: range: -1..1048576 Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10
tSapIngressQueueMBSobsolete The maximum amount of buffer space (in kilobytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.	TIMETRA-TC-MIBTBurstSizer/w Type Constraints: range: -1..1048576 Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11
tSapIngressQueueHiPrioOnlyobsolete The percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tSapIngQDrpTailLowReductnMbs object.	TIMETRA-TC-MIBTBurstPercentOrDefaultr/w Type Constraints: range: -1..100 Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12
tSapIngressQueuePIRAdaptation The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13
tSapIngressQueueCIRAdaptation The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14
tSapIngressQueueAdminPIRobsolete The administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngressQueueAdminPIRHi and tSapIngressQueueAdminPIRLo objects.	kilobpsTIMETRA-TC-MIBTQosQueuePIRRater/w Type Constraints: range: -1 range: 1..2000000000 Description: The PIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15
tSapIngressQueueAdminCIRobsolete The administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngressQueueAdminCIRHi and tSapIngressQueueAdminCIRLo objects.	kilobpsTIMETRA-TC-MIBTQosQueueCIRRater/w Type Constraints: range: -1..2000000000 Description: The CIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16
tSapIngressQueueOperPIRobsolete The operating PIR.	kilobpsTIMETRA-TC-MIBTPIRRate Type Constraints: range: -1 range: 1..100000000 Description: The PIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17
tSapIngressQueueOperCIRobsolete The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.	kilobpsTIMETRA-TC-MIBTCIRRate Type Constraints: range: -1..100000000 Description: The CIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18
tSapIngressQueueLastChanged timestamp of last change to this row in tSapIngressQueueTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19
tSapIngressQueuePoliced tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdmin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20
tSapIngressQueueMode tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.	TIMETRA-TC-MIBTQueueModer/w Type Values: 1 priority 2 profile Description: The mode in which the queue is operating. If the queue is operating in the 'priority' mode, it is capable of handling traffic differently with two distinct priorities. These priorities are assigned by the sta…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21
tSapIngressQueuePoolNameobsolete The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22
tSapIngressQueueMBSBytes The maximum amount of buffer space (in bytes) allowed for the queue.	bytesTIMETRA-TC-MIBTBurstSizeBytesr/w Type Constraints: range: -1..1073741824 Description: The amount of buffer space (in bytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23
tSapIngressQueueBurstLimit The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.	bytesTIMETRA-TC-MIBTBurstLimitr/w Type Constraints: range: -1 range: 1..14000000 Description: An explicit shaping burst size for a queue. The value of -1 specifies system default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24
tSapIngressQueueAdminPIRPercent The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.	centipercentUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25
tSapIngressQueueAdminCIRPercent The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.	centipercentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26
tSapIngressQueueRateType The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueue…	TIMETRA-TC-MIBTPolicerRateTypeWithRefLimitr/w Type Values: 1 kbps 2 percentPortLimit 3 percentLocalLimit 4 percentReferPortLimit Description: The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentPortLimit' means the rate is specified in percentage of port limit. The value 'percentLocalLimit' means the r…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27
tSapIngressQueueAdvCfgPolicy The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28
tSapIngressQueuePktOffset The value of tSapIngressQueuePktOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for queue accounting. A 'wrongValue' error is returned while trying to set odd va…	bytesTIMETRA-TC-MIBTIngressQPerPacketOffsetr/w Type Constraints: range: -32..30 Description: The value, in bytes, of the adjustment to make to the size of each incoming packet for accounting. Only even values are supported.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.29
tSapIngQDrpTailLowReductnMbs The value of tSapIngQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tSapIngressQueueMBSBytes.	TIMETRA-TC-MIBTBurstPercentOrDefaultr/w Type Constraints: range: -1..100 Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.30
tSapIngressQueueAdminPIRHi The value of tSapIngressQueueAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngressQueueAdminPIRLo, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.31
tSapIngressQueueAdminPIRLo The value of tSapIngressQueueAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngressQueueAdminPIRHi, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.32
tSapIngressQueueAdminCIRHi The value of tSapIngressQueueAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngressQueueAdminCIRLo, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.33
tSapIngressQueueAdminCIRLo The value of tSapIngressQueueAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngressQueueAdminCIRHi, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.34
tSapIngressQueueFIRAdaptation The adaptation rule to be used while computing the operational FIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.35
tSapIngressQueueAdminFIRPercent The administrative FIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminFIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.	centipercentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.36
tSapIngressQueueAdminFIRHi The value of tSapIngressQueueAdminFIRHi specifies the upper 32 bits of the administrative FIR specified by the user. This value should always be set along with tSapIngressQueueAdminFIRLo, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.37
tSapIngressQueueAdminFIRLo The value of tSapIngressQueueAdminFIRLo specifies the lower 32 bits of the administrative FIR specified by the user. This value should always be set along with tSapIngressQueueAdminFIRHi, otherwise an 'in…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.38
tSapIngressQueueCIRNonProfiling tSapIngressQueueCIRNonProfiling specifies the CIR to affect the scheduling priority of a queue but does not modify the profile of packets depending on the specified CIR.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.39

a list of all DSCP entries for all sap-ingress policies.

tSapIngressDSCPEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.3.1

Information about a particular DSCP entry for a sap-ingress policy.

Entries are created by user. Entries are deleted by user.

There is no StorageType object, entries have a presumed StorageType…

Indexes

tSapIngressIndex tSapIngressDSCP

Column	Syntax	OID
tSapIngressDSCP	TIMETRA-TC-MIBTDSCPName Based On: TNamedItem Description: The name of a Differential Services Code Point value.	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1
tSapIngressDSCPRowStatus This object allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2
tSapIngressDSCPFC tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding c…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3
tSapIngressDSCPPriority	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4
tSapIngressDSCPLastChanged timestamp of last change to this row in tSapIngressDSCPTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5
tSapIngressDSCPHsmdaCntrOvrobsolete The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters …	TIMETRA-TC-MIBTIngressHsmdaCounterIdOrZeror/w Type Constraints: range: 0..8 Description: The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id.	.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.6

a list of all dot1p entries for all sap-ingress policies.

tSapIngressDot1pEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.4.1

Information about a particular dot1p match for a sap-ingress policy.
Entries are created by user. Entries are deleted by user.

There is no StorageType object, entries have a presumed StorageType of
nonVolat…

Indexes

tSapIngressIndex tSapIngressDot1pValue

Column	Syntax	OID
tSapIngressDot1pValue dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.	TIMETRA-TC-MIBDot1PPriority Constraints: range: 0-7 Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1
tSapIngressDot1pRowStatus Row Status for this sap-ingress policy's dot1p entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2
tSapIngressDot1pFC tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forw…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3
tSapIngressDot1pPriority priority to use for packets that match the dot1p value tSapIngressDot1pValue.	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4
tSapIngressDot1pLastChanged timestamp of last change to this row in tSapIngressDot1pTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5
tSapIngressDot1pHsmdaCntrOvrobsolete The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default c…	TIMETRA-TC-MIBTIngressHsmdaCounterIdOrZeror/w Type Constraints: range: 0..8 Description: The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id.	.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.6

information about all sap-ingress policies' IP criteria entries.

tSapIngressIPCriteriaEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.5.1

Information about a particular IP criteria entry for a sap-ingress
policy. Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile.

Indexes

tSapIngressIndex tSapIngressIPCriteriaIndex

Column	Syntax	OID
tSapIngressIPCriteriaIndex unique identifier separates this entry from others in this policy.	TIMETRA-TC-MIBTEntryId Based On: TEntryIndicator Type Constraints: range: 1..65535 Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1
tSapIngressIPCriteriaRowStatus Row Status for the IP Criteria entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2
tSapIngressIPCriteriaDescription description of this IP criteria entry.	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3
tSapIngressIPCriteriaActionFC tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding cla…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4
tSapIngressIPCriteriaActionPriority priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which ma…	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5
tSapIngressIPCriteriaSourceIpAddr IP address to match with source IP of the packet. The value of object tSapIngressIPCriteriaSourceIpAddr needs to be always set together along with tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrc…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6
tSapIngressIPCriteriaSourceIpMask If different from 0, the object tSapIngressIPCriteriaSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tSapIngressIPCriteriaSour…	TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32 Description: the number of bits to match in an IP address mask.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7
tSapIngressIPCriteriaDestIpAddr IP address to match with destination IP of the packet. The value of object tSapIngressIPCriteriaDestIpAddr needs to be always set together along with tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDs…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8
tSapIngressIPCriteriaDestIpMask If different from 0, the object tSapIngressIPCriteriaDestIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tSapIngressIPCriteriaD…	TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32 Description: the number of bits to match in an IP address mask.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9
tSapIngressIPCriteriaProtocol IP protocol to match. Use -1 to disable matching by IP protocol.	TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255 Description: IP protocol number. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10
tSapIngressIPCriteriaSourcePortValue1 TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1,…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11
tSapIngressIPCriteriaSourcePortValue2 TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1,…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12
tSapIngressIPCriteriaSourcePortOperator The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator …	TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Based On: TOperator Description: The operator used for checking on TCP/UDP ports values and ranges	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13
tSapIngressIPCriteriaDestPortValue1 TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, t…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14
tSapIngressIPCriteriaDestPortValue2 TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, t…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15
tSapIngressIPCriteriaDestPortOperator The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is use…	TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Based On: TOperator Description: The operator used for checking on TCP/UDP ports values and ranges	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16
tSapIngressIPCriteriaDSCP DSCP value to match in the packet	TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Based On: TNamedItemOrEmpty Description: The name of a Differential Services Code Point value.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17
tSapIngressIPCriteriaFragment matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).	TIMETRA-TC-MIBTItemMatchr/w Type Values: 1 off 2 false 3 true Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19
tSapIngressIPCriteriaLastChanged timestamp of last change to this row in tSapIngressIPCriteriaTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20
tSapIngressIPCritHsmdaCntrOvrobsolete The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on…	TIMETRA-TC-MIBTIngressHsmdaCounterIdOrZeror/w Type Constraints: range: 0..8 Description: The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.21
tSapIngressIPCritSrcIpFullMask If different from 0, the object tSapIngressIPCritSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tSapIngressIPCriteriaSourceI…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.22
tSapIngressIPCritDstIpFullMask If different from 0, the object tSapIngressIPCritDstIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Dest IP address to match the tSapIngressIPCriteriaDestIpAdd…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.23
tSapIngressIPCritActionPolicer The value of tSapIngressIPCritActionPolicer specifies the policer identifier to be used for the traffic matching this IP Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress poli…	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.24
tSapIngressIPCritSrcIpPrefixList The value of tSapIngressIPCritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined i…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.26
tSapIngressIPCritDstIpPrefixList The value of tSapIngressIPCritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list defi…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.27
tSapIngressIPCritVxlanVniVal1 The value of tSapIngressIPCritVxlanVniVal1 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. …	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.28
tSapIngressIPCritVxlanVniVal2 The value of tSapIngressIPCritVxlanVniVal2 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. …	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.29
tSapIngressIPCritVxlanVniOper The value of tSapIngressIPCritVxlanVniOper operator specifies the manner in which tSapIngressIPCritVxlanVniVal1 and tSapIngressIPCritVxlanVniVal2 are to be used: Operator Value1 Val…	Enumerationr/w Enumerated Values: 0 none 1 eq 2 range	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.30
tSapIngressIPCriteriaTagId The value of tSapIngressIPCriteriaTagId specifies tag identification associated with the entry.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.31

information about all sap-ingress policies' MAC criteria entries.

tSapIngressMacCriteriaEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.6.1

Information about a particular MAC criteria entry for a sap-ingress
policy. Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile.

Indexes

tSapIngressIndex tSapIngressMacCriteriaIndex

Column	Syntax	OID
tSapIngressMacCriteriaIndex	TIMETRA-TC-MIBTEntryId Based On: TEntryIndicator Type Constraints: range: 1..65535 Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1
tSapIngressMacCriteriaRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2
tSapIngressMacCriteriaDescription	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3
tSapIngressMacCriteriaActionFC tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding c…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4
tSapIngressMacCriteriaActionPriority	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5
tSapIngressMacCriteriaFrameType The type of mac frame for which we are defining this match criteria.	TIMETRA-TC-MIBTFrameTyper/w Type Values: 0 e802dot3 1 e802dot2LLC 2 e802dot2SNAP 3 ethernetII Description: The type of the frame for which this mac filter match criteria is defined.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6
tSapIngressMacCriteriaSrcMacAddr	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8
tSapIngressMacCriteriaSrcMacMask	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9
tSapIngressMacCriteriaDstMacAddr	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10
tSapIngressMacCriteriaDstMacMask	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11
tSapIngressMacCriteriaDot1PValue	TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7 Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12
tSapIngressMacCriteriaDot1PMask	TIMETRA-TC-MIBDot1PPriorityr/w Constraints: range: 0-7 Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13
tSapIngressMacCriteriaEthernetType the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	Integer32r/w Constraints: range: -1--1 range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14
tSapIngressMacCriteriaDSAP the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255 Description: 802.2 LLC SAP value, Source and Destination.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15
tSapIngressMacCriteriaDSAPMask the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255 Description: 802.2 LLC SAP value, Source and Destination.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16
tSapIngressMacCriteriaSSAP the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255 Description: 802.2 LLC SAP value, Source and Destination.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17
tSapIngressMacCriteriaSSAPMask the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255 Description: 802.2 LLC SAP value, Source and Destination.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18
tSapIngressMacCriteriaSnapPid the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19
tSapIngressMacCriteriaSnapOui whether to match snap-oui, and what to match.	Enumerationr/w Enumerated Values: 1 off 2 zero 3 nonZero	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20
tSapIngressMacCriteriaLastChanged timestamp of last change to this row in tSapIngressMacCriteriaTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21
tSapIngressMacCriteriaAtmVciobsolete The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tS…	ATM-TC-MIBAtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.22
tSapIngressMacCritInnerTagValue The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service del…	TIMETRA-TC-MIBQTagFullRangeOrNoner/w Type Constraints: range: -1..4095 Description: The data type QTagFullRangeOrNone represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF). The value '-1' indicat…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.23
tSapIngressMacCritInnerTagMask The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that…	TIMETRA-TC-MIBQTagFullRanger/w Constraints: range: 1-4095 Description: The data type QTagFullRange represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF)	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.24
tSapIngressMacCritOuterTagValue The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delim…	TIMETRA-TC-MIBQTagFullRangeOrNoner/w Type Constraints: range: -1..4095 Description: The data type QTagFullRangeOrNone represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF). The value '-1' indicat…	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.25
tSapIngressMacCritOuterTagMask The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that …	TIMETRA-TC-MIBQTagFullRanger/w Constraints: range: 1-4095 Description: The data type QTagFullRange represents a VLAN tag. A VLAN tag is 12 bits is size. The data type QTagFullRange covers the whole range of possible values. (0..4095 or 0x0 .. 0xFFF)	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.26
tSapIngressMacCritActionPolicer The value of tSapIngressMacCritActionPolicer specifies the policer identifier to be used for the traffic matching this MAC Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress po…	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.27

This table maintains the mapping of a particular forwarding class
traffic into the specified queue.

tSapIngressFCEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.7.1

Information about a particular sap-ingress policy's forwarding class
mappings to queues.

Entries are created and deleted by user. They have a presumed
StorageType of nonVolatile.

Indexes

tSapIngressIndex tSapIngressFCName

Column	Syntax	OID
tSapIngressFCName tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class …	TIMETRA-TC-MIBTNamedItem Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1
tSapIngressFCRowStatus Row Status for this queue.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2
tSapIngressFCQueue The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used. …	TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32 Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngre…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3
tSapIngressFCMCastQueue The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object alon…	TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32 Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngre…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4
tSapIngressFCBCastQueue The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object alon…	TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32 Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngre…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5
tSapIngressFCUnknownQueue The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this o…	TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32 Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngre…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6
tSapIngressFCLastChanged tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7
tSapIngressFCInProfRemark tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues. When the value of tSapIngressFCInProfRemark is set to 'none', the values of tSapIngres…	TIMETRA-TC-MIBTRemarkTyper/w Type Values: 1 none 2 dscp 3 precedence Description: The remarking to be used.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8
tSapIngressFCInProfDscp tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9
tSapIngressFCInProfPrec tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.	TIMETRA-TC-MIBTPrecValueOrNoner/w Type Constraints: range: -1..7 Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10
tSapIngressFCOutProfRemark tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues. When the value of tSapIngressFCOutProfRemark is set to 'none', the values of tSapIngr…	TIMETRA-TC-MIBTRemarkTyper/w Type Values: 1 none 2 dscp 3 precedence Description: The remarking to be used.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11
tSapIngressFCOutProfDscp tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12
tSapIngressFCOutProfPrec tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.	TIMETRA-TC-MIBTPrecValueOrNoner/w Type Constraints: range: -1..7 Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13
tSapIngressFCProfile tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have thei…	TIMETRA-TC-MIBTProfileOrNoner/w Type Values: 0 none 1 in 2 out Description: Profile marking of a packet.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14
tSapIngressFCHsmdaQueueobsolete The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default q…	TIMETRA-TC-MIBTIngressHsmdaQueueIdr/w Type Constraints: range: 0..8 Description: The value of TIngressHsmdaQueueId specifies the identification number of a HSMDA ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of t…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.15
tSapIngressFCHsmdaMCastQueueobsolete The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the …	TIMETRA-TC-MIBTIngressHsmdaQueueIdr/w Type Constraints: range: 0..8 Description: The value of TIngressHsmdaQueueId specifies the identification number of a HSMDA ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of t…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.16
tSapIngressFCHsmdaBCastQueueobsolete The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the …	TIMETRA-TC-MIBTIngressHsmdaQueueIdr/w Type Constraints: range: 0..8 Description: The value of TIngressHsmdaQueueId specifies the identification number of a HSMDA ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of t…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.17
tSapIngressFCDE1OutOfProfile The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18
tSapIngressFCQGrp tSapIngressFCQGrp specifies the tQosIngQGroupName. The value of objects tSapIngressFCQueue and tSapIngressFCQGrp should always be set together. When the value of tSapIngressFCQGrp is set to default and th…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.19
tSapIngressFCQGrpMCast tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. The value of objects tSapIngressFCMCastQueue and tSapIngressFCQGrpMCast should always be set together. When the value of tSapIngressFCQGrpMCast is s…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.20
tSapIngressFCQGrpBCast tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. The value of objects tSapIngressFCBCastQueue and tSapIngressFCQGrpBCast should always be set together. When the value of tSapIngressFCQGrpBCast is s…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.21
tSapIngressFCQGrpUnknown tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. The value of objects tSapIngressFCUnknownQueue and tSapIngressFCQGrpUnknown should always be set together. When the value of tSapIngressFCQGrpUnkn…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.22
tSapIngressFCPolicer tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.23
tSapIngressFCMCastPolicer tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.24
tSapIngressFCBCastPolicer tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.25
tSapIngressFCUnknownPolicer tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.26
tSapIngressFCPlcrFPQGrp The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.27
tSapIngressFCMCastPlcrFPQGrp The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'tr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.28
tSapIngressFCBCastPlcrFPQGrp The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'tr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.29
tSapIngressFCUnknownPlcrFPQGrp The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to '…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.30
tSapIngressFCEgressOverrideFC The value of tSapIngressFCEgressOverrideFC specifies the forwarding class that overrides the forwarding class determined by ingress classification. The forwarding class and/or forwarding sub-class can be …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.31

This table maintains the mapping of a particular precedence value into
a forwarding class

tSapIngressPrecEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.8.1

Information about a particular sap-ingress policy's IP precedence
values to forwarding class mappings.

Entries are created and deleted by user. They have a presumed
StorageType of nonVolatile.

Indexes

tSapIngressIndex tSapIngressPrecValue

Column	Syntax	OID
tSapIngressPrecValue Precedence value for which the mapping is done.	TIMETRA-TC-MIBTPrecValue Type Constraints: range: 0..7 Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7.	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1
tSapIngressPrecRowStatus Row Status for this mapping.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2
tSapIngressPrecFC tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3
tSapIngressPrecFCPriority The priority to be assigned to the matching traffic.	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4
tSapIngressPrecLastChanged timestamp of last change to this row in tSapIngressPrecTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5
tSapIngressPrecHsmdaCntrOvrobsolete The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the …	TIMETRA-TC-MIBTIngressHsmdaCounterIdOrZeror/w Type Constraints: range: 0..8 Description: The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id.	.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.6

Information about all sap-ingress policies' IPv6 criteria entries.

tSapIngressIPv6CriteriaEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.9.1

Information about a particular IPv6 criteria entry for a sap-ingress
policy. Entries are created/deleted by user. There is no StorageType
object, entries have a presumed StorageType of nonVolatile.

Indexes

tSapIngressIndex tSapIngressIPv6CriteriaIndex

Column	Syntax	OID
tSapIngressIPv6CriteriaIndex The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.	TIMETRA-TC-MIBTEntryId Based On: TEntryIndicator Type Constraints: range: 1..65535 Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1
tSapIngressIPv6CriteriaRowStatus The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2
tSapIngressIPv6CriteriaDescription The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3
tSapIngressIPv6CriteriaActionFC The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specifica…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4
tSapIngressIPv6CriteriaActionPriority The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched…	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5
tSapIngressIPv6CriteriaSourceIpAddr The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source IPv6 of the packet.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6
tSapIngressIPv6CriteriaSourceIpMask If different from 0, the object tSapIngressIPv6CriteriaSourceIpMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received source IPv6 address to match the tSapIngressIPv6Cr…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7
tSapIngressIPv6CriteriaDestIpAddr The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destinationp IPv6 of the packet.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8
tSapIngressIPv6CriteriaDestIpMask If different from 0, the object tSapIngressIPv6CriteriaDestIpMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Destination IPv6 address to match the tSapIngressIPv…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9
tSapIngressIPv6CriteriaNextHeader The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. Use -1 to disable matching by Next Header.	TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255 Description: IP protocol number. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10
tSapIngressIPv6CriteriaSourcePortValue1 The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. This object…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11
tSapIngressIPv6CriteriaSourcePortValue2 The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. This object can…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12
tSapIngressIPv6CriteriaSourcePortOperator The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used. …	TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Based On: TOperator Description: The operator used for checking on TCP/UDP ports values and ranges	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13
tSapIngressIPv6CriteriaDestPortValue1 The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. This object can…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14
tSapIngressIPv6CriteriaDestPortValue2 The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. This object can…	TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535 Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15
tSapIngressIPv6CriteriaDestPortOperator The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used. This object cannot set to non…	TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Based On: TOperator Description: The operator used for checking on TCP/UDP ports values and ranges	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16
tSapIngressIPv6CriteriaDSCP The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet	TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Based On: TNamedItemOrEmpty Description: The name of a Differential Services Code Point value.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17
tSapIngressIPv6CriteriaLastChanged The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20
tSapIngressIPv6CritSrcIpFullMask If different from 0, the object tSapIngressIPv6CritSrcIpFullMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Source IPv6 address to match the tSapIngressIPv6Crite…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.22
tSapIngressIPv6CritDstIpFullMask If different from 0, the object tSapIngressIPv6CritDstIpFullMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Dest IPv6 address to match the tSapIngressIPv6Criteri…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.23
tSapIngressIPv6CritActionPolicer The value of tSapIngressIPv6CritActionPolicer specifies the policer identifier to be used for the traffic matching this IPv6 Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress …	TIMETRA-TC-MIBTIngressPolicerIdOrNoner/w Type Constraints: range: 0..63 Description: The data type describes the QoS control policer identifier on ingress side or zero when not specified.	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.24
tSapIngressIPv6CriteriaFragment The value of tSapIngressIPv6CriteriaFragment specifies matching criteria to be used for fragmented or non-fragmented IPv6 packets. off (1) - match all IPv6 packets regardless of fragmented …	Enumerationr/w Enumerated Values: 1 off 2 false 3 true 4 firstOnly 5 nonFirstOnly	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.25
tSapIngressIPv6CritVxlanVniVal1 The value of tSapIngressIPv6CritVxlanVniVal1 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. …	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.28
tSapIngressIPv6CritVxlanVniVal2 The value of tSapIngressIPv6CritVxlanVniVal2 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. …	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.29
tSapIngressIPv6CritVxlanVniOper The value of tSapIngressIPv6CritVxlanVniOper operator specifies the manner in which tSapIngressIPv6CritVxlanVniVal1 and tSapIngressIPv6CritVxlanVniVal2 are to be used: Operator Value1 …	Enumerationr/w Enumerated Values: 0 none 1 eq 2 range	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.30
tSapIngIPv6CritSrcIpPrefixList The value of tSapIngIPv6CritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined in …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.32
tSapIngIPv6CritDstIpPrefixList The value of tSapIngIPv6CritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list define…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.33
tSapIngressIPv6CriteriaTagId The value of tSapIngressIPv6CriteriaTagId specifies tag identification associated with the entry.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.34

Information about all sap-ingress policies' HSMDA queues.
          
This table is obsoleted in 10.0 release.

tSapIngressHsmdaQueueEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.10.1

Information about a particular HSMDA queue for a sap-ingress policy.
Entries are created by user.

Indexes

tSapIngressIndex tSapIngressHsmdaQueue

Column	Syntax	OID
tSapIngressHsmdaQueueobsolete The HSMDA queue ID is used as the secondary index to the table entry.	TIMETRA-TC-MIBTIngressHsmdaQueueId Constraints: range: 1-8 Description: The value of TIngressHsmdaQueueId specifies the identification number of a HSMDA ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of t…	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.1
tSapIngressHsmdaQueueRowStatusobsolete The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.2
tSapIngressHsmdaQueueLastChangedobsolete The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.3
tSapIngressHsmdaQueueCIRAdaptnobsolete The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining…	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.4
tSapIngressHsmdaQueuePIRAdaptnobsolete The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining…	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.5
tSapIngressHsmdaQueueAdminPIRobsolete The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.	kilobpsTIMETRA-TC-MIBTHsmdaPIRKRater/w Type Constraints: range: -1 range: 1..100000000 Description: The HSMDA PIR rate to be used in Kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.6
tSapIngressHsmdaQueueAdminCIRobsolete The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.	kilobpsTIMETRA-TC-MIBTHsmdaCIRKRater/w Type Constraints: range: -1..100000000 Description: The HSMDA CIR rate to be used in Kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.7
tSapIngressHsmdaQueueSlopePolicyobsolete The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.	TIMETRA-TC-MIBTNamedItemr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl…	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.8
tSapIngressHsmdaQueuePolicedobsolete The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.10.1.9

This table maintains the mappings of an Lsp Exp Bit value into a
forwarding class

tSapIngressLspExpEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.11.1

Information about a particular sap-ingress policy's Lsp Exp Bit values
to forwarding class mappings.

Entries are created and deleted by user. They have a presumed
StorageType of nonVolatile.

Indexes

tSapIngressIndex tSapIngressLspExpValue

Column	Syntax	OID
tSapIngressLspExpValue The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.	TIMETRA-TC-MIBTLspExpValue Constraints: range: 0-7 Description: MPLS Experimental bits. -1 means not set.	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.1
tSapIngressLspExpRowStatus The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.2
tSapIngressLspExpLastChanged The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.3
tSapIngressLspExpFC The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.4
tSapIngressLspExpFCPriority The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.	TIMETRA-TC-MIBTPriorityOrDefaultr/w Type Values: 1 low 2 high 3 default Description: the priority to apply to a packet. when set to default(3), the priority from the default action is used.	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.5
tSapIngressLspExpHsmdaCntrOvrobsolete The value of the object tSapIngressLspExpHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the…	TIMETRA-TC-MIBTIngressHsmdaCounterIdOrZeror/w Type Constraints: range: 0..8 Description: The identification number of a HSMDA ingress counter. The value 0 indicates an undefined counter id.	.1.3.6.1.4.1.6527.3.1.2.16.3.11.1.6

tSapIngPolicerTable defines SAP Ingress Policer Table for providing,
via SNMP, the capability of defining the policers.
          
tSapIngPolicerTable holds a list of all the policers configured in the
managed system. Policers must exist in this table before being
referenced by the forwarding class mappings within the queue policy as
defined in the tSapIngressFCTable.

tSapIngPolicerEntry row .1.3.6.1.4.1.6527.3.1.2.16.3.12.1

tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable.

Entries are created/deleted in this table by SNMP sets to
tSapIngPolicerRowStatus.

Indexes

tSapIngressIndex tSapIngPolicerId

Column	Syntax	OID
tSapIngPolicerId tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.	TIMETRA-TC-MIBTIngressPolicerId Type Constraints: range: 1..63 Description: The data type describes the QoS control policer identifier on ingress side.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1
tSapIngPolicerRowStatus tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2
tSapIngPolicerLastChanged tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3
tSapIngPolicerDescr tSapIngPolicerDescr specifies the description of the policer.	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4
tSapIngPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5
tSapIngPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TIMETRA-TC-MIBTAdaptationRuler/w Type Values: 1 max 2 min 3 closest Description: The adaptation rule to be applied to calculate the operational values for the specified entity.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6
tSapIngPolicerParent tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7
tSapIngPolicerLevel tSapIngPolicerLevel specifies the level of priority while feeding the parent.	TIMETRA-TC-MIBTLevelr/w Type Constraints: range: 1..8 Description: The level of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8
tSapIngPolicerWeight tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.	TIMETRA-TC-MIBTPolicerWeightr/w Type Constraints: range: 1..100 Description: The relative weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9
tSapIngPolicerAdminPIRobsolete tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminPIRHi and tSapIngPolicerAdminPIRLo objects.	kilobpsTIMETRA-TC-MIBTHPolPIRRater/w Type Constraints: range: -1 range: 1..2000000000 Description: The PIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10
tSapIngPolicerAdminCIRobsolete tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminCIRHi and tSapIngPolicerAdminCIRLo objects.	kilobpsTIMETRA-TC-MIBTHPolCIRRater/w Type Constraints: range: -1..2000000000 Description: The CIR rate to be used in kbps. The value -1 means maximum rate.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11
tSapIngPolicerStatMode tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.	TIMETRA-TC-MIBTmnxSapIngPolicerStatModer/w Type Values: 0 noStats 1 minimal 2 offeredProfileNoCIR 3 offeredTotalCIR 4 offeredPriorityNoCIR 5 offeredProfileCIR 6 offeredPriorityCIR 7 offeredLimitedProfileCIR 8 offeredProfileCappedCIR 9 offeredLimitedCappedCIR 10 offeredProfileWithDiscards 11 offeredFourProfileWithDiscards Description: TmnxSapIngPolicerStatMode specifies the mode of statistics collected by this sap ingress policer.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12
tSapIngPolicerMBS The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.	bytesTIMETRA-TC-MIBTPolicerBurstSizeBytesr/w Type Constraints: range: -1..268435456 Description: The amount of buffer space (in bytes) assigned to a queue by policer. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13
tSapIngPolicerHiPrioOnly The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.	percentTIMETRA-TC-MIBTBurstPercentOrDefaultr/w Type Constraints: range: -1..100 Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14
tSapIngPolicerCBS The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.	bytesTIMETRA-TC-MIBTPolicerBurstSizeBytesr/w Type Constraints: range: -1..268435456 Description: The amount of buffer space (in bytes) assigned to a queue by policer. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15
tSapIngPolicerPktOffset tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.	TIMETRA-TC-MIBTPerPacketOffsetr/w Type Constraints: range: -32..31 Description: The value, in bytes, of the adjustment to make to the size of each packet for accounting.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16
tSapIngPolicerAdminPIRPercent The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.	centipercentUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17
tSapIngPolicerAdminCIRPercent The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.	centipercentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18
tSapIngPolicerRateType The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerA…	TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimitr/w Type Values: 1 kbps 2 percentLocalLimit 3 percentReferPortLimit Description: The type of the PIR/CIR percent rate. The value 'kbps' means the rate is specified in kbps. The value 'percentLocalLimit' means the rate is specified in percentage of local limit. The value 'percentReferPortLimit' means…	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19
tSapIngPolicerSlopeStartDepthobsolete The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0. This object is obsoleted in 14.0 Release.	centipercentUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20
tSapIngPolicerSlopeMaxDepthobsolete The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. T…	centipercentUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21
tSapIngPolicerSlopeMaxProbobsolete The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth …	centipercentUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22
tSapIngPolicerSlopeMapobsolete The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer. This object is obsoleted in 14.0 Release.	TIMETRA-TC-MIBTmnxSlopeMapr/w Type Values: 0 none 1 low 2 high 3 highLow Description: TmnxSlopeMap indicates the mapping style of the slope.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23
tSapIngPolicerAdvCfgPolicy The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24
tSapIngPolicerProfileCapped The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is s…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25
tSapIngPolicerAdminPIRHi The value of tSapIngPolicerAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngPolicerAdminPIRLo, otherwise an 'incons…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.26
tSapIngPolicerAdminPIRLo The value of tSapIngPolicerAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngPolicerAdminPIRHi, otherwise an 'incons…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.27
tSapIngPolicerAdminCIRHi The value of tSapIngPolicerAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngPolicerAdminCIRLo, otherwise an 'incons…	kilobpsTIMETRA-TC-MIBTmnxQosRateHigh32r/w Based On: TmnxHigh32 Type Constraints: range: 0..1 range: 4294967295 Description: The upper 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.28
tSapIngPolicerAdminCIRLo The value of tSapIngPolicerAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngPolicerAdminCIRHi, otherwise an 'incons…	kilobpsTIMETRA-TC-MIBTmnxQosRateLow32r/w Based On: TmnxLow32 Type Constraints: range: 0..4294967295 Description: The lower 32 bits of a 64 bit rate value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.29
tSapIngPolicerSchedParent The value of tSapIngPolicerSchedParent specifies the scheduler to which this policer would be feeding to.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.30
tSapIngPolicerSchedLevel The value of tSapIngPolicerSchedLevel specifies the level of priority while feeding to the parent.	TIMETRA-TC-MIBTLevelr/w Type Constraints: range: 1..8 Description: The level of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.31
tSapIngPolicerSchedWeight The value of tSapIngPolicerSchedWeight specifies the weight that needs to be used by the scheduler to which this policer would be feeding to.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.32
tSapIngPolicerSchedCIRLevel The value of tSapIngPolicerSchedCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this policer as for the above CIR traffic.	TIMETRA-TC-MIBTLevelOrDefaultr/w Type Constraints: range: 0..8 Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.33
tSapIngPolicerSchedCIRWeight The value of tSapIngPolicerSchedCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this policer would be feeding to.	TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100 Description: The weight of the specified entity while feeding into the parent.	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.34
tSapIngPolicerAlgoType The value of tSapIngPolicerAlgoType specifies the policer mode.	Enumerationr/w Enumerated Values: 1 trtcmDs 2 trtcmDsCoupled	.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.35