tSapIngPolicerProfileCapped
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25
Object
The value of tSapIngPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
ingress policer.
When the value of tSapIngPolicerProfileCapped is set to 'true', both
explicit in-profile and undetermined profile traffic is honored up to
CIR, above which it is marked as out-of-profile. If CIR is set to
zero, then all explicit in-profile and undetermined profile packets,
along with the explicit out-of-profile packets are marked as
out-of-profile.
The default behavior when tSapIngPolicerProfileCapped is set to
'false' is to ignore the CIR output state when an explicit in-profile
packet is handled by an ingress policer.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tSapIngPolicerEntry
- Table
- tSapIngPolicerTable
- Siblings
- 28
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapIngPolicerId tSapIngPolicerId defines the SAP Ingress Policer identifier. It
identifies an sap-ingress policer in the managed system. | column | TIMETRA-TC-MIBTIngressPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1 |
| tSapIngPolicerAdminPIR obsolete tSapIngPolicerAdminPIR specifies the administrative PIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapIngPolicerAdminPIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10 |
| tSapIngPolicerAdminCIR obsolete tSapIngPolicerAdminCIR specifies the administrative CIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapIngPolicerAdminCIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11 |
| tSapIngPolicerStatMode tSapIngPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxSapIngPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12 |
| tSapIngPolicerMBS The tSapIngPolicerMBS specifies the high priority 'violate' threshold
of PIR leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13 |
| tSapIngPolicerHiPrioOnly The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky
bucket's MBS (maximum burst size) of this policer that is reserved for
high priority traffic. | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14 |
| tSapIngPolicerCBS The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR
leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15 |
| tSapIngPolicerPktOffset tSapIngPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16 |
| tSapIngPolicerAdminPIRPercent The administrative PIR percentage, in centipercent. An
'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent
is set to non-default value when the object tSapIngPo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17 |
| tSapIngPolicerAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent
is set to non-default value when the object tSapIngPo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18 |
| tSapIngPolicerRateType The value of tSapIngPolicerRateType specifies the type of ingress
policer rate.
When the value of the object is set to 'kbps', the ingresss policer
rates are specif… | column | TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19 |
| tSapIngPolicerRowStatus tSapIngPolicerRowStatus allows entries to be created and deleted in
the tSapIngPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2 |
| tSapIngPolicerSlopeStartDepth obsolete The value of tSapIngPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20 |
| tSapIngPolicerSlopeMaxDepth obsolete The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21 |
| tSapIngPolicerSlopeMaxProb obsolete The value of tSapIngPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tSapIngPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22 |
| tSapIngPolicerSlopeMap obsolete The value of tSapIngPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23 |
| tSapIngPolicerAdvCfgPolicy The value of tSapIngPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24 |
| tSapIngPolicerAdminPIRHi The value of tSapIngPolicerAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapIn… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.26 |
| tSapIngPolicerAdminPIRLo The value of tSapIngPolicerAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapIn… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.27 |
| tSapIngPolicerAdminCIRHi The value of tSapIngPolicerAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapIn… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.28 |
| tSapIngPolicerAdminCIRLo The value of tSapIngPolicerAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapIn… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.29 |
| tSapIngPolicerLastChanged tSapIngPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3 |
| tSapIngPolicerDescr tSapIngPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4 |
| tSapIngPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5 |
| tSapIngPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6 |
| tSapIngPolicerParent tSapIngPolicerParent specifies the scheduler to which this queue would
be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7 |
| tSapIngPolicerLevel tSapIngPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8 |
| tSapIngPolicerWeight tSapIngPolicerWeight specifies the weight that needs to be used by the
scheduler to which this queue would be feeding. | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9 |