tSapIngPolicerAdminPIRLo

TIMETRA-QOS-MIB · .1.3.6.1.4.1.6527.3.1.2.16.3.12.1.27
MIB view Table view

Object

column r/w kilobps TIMETRA-TC-MIBTmnxQosRateLow32 
The value of tSapIngPolicerAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
              
This value should always be set along with tSapIngPolicerAdminPIRHi,
otherwise an 'inconsistentValue' error is returned.
              
When the value of tSapIngPolicerAdminPIRHi along with the value of
tSapIngPolicerAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
this queue indicates maximum rate.

Context

MIB
TIMETRA-QOS-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.27
Type
column
Access
readwrite
Status
current
Units
kilobps
Parent
tSapIngPolicerEntry
Table
tSapIngPolicerTable
Siblings
28

Syntax

kilobps TIMETRA-TC-MIBTmnxQosRateLow32
Source
TIMETRA-TC-MIBTmnxQosRateLow32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tSapIngPolicerId
tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.
columnTIMETRA-TC-MIBTIngressPolicerId.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1
tSapIngPolicerAdminPIR obsolete
tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminPIRHi and tSa…
columnkilobps TIMETRA-TC-MIBTHPolPIRRate.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10
tSapIngPolicerAdminCIR obsolete
tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminCIRHi and tSa…
columnkilobps TIMETRA-TC-MIBTHPolCIRRate.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11
tSapIngPolicerStatMode
tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.
columnTIMETRA-TC-MIBTmnxSapIngPolicerStatMode.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12
tSapIngPolicerMBS
The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
columnbytes TIMETRA-TC-MIBTPlcrBurstSizeBytes.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13
tSapIngPolicerHiPrioOnly
The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
columnpercent TIMETRA-TC-MIBTBurstPercentOrDefault.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14
tSapIngPolicerCBS
The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
columnbytes TIMETRA-TC-MIBTPlcrBurstSizeBytes.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15
tSapIngPolicerPktOffset
tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
columnTIMETRA-TC-MIBTPerPacketOffset.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16
tSapIngPolicerAdminPIRPercent
The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPo…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17
tSapIngPolicerAdminCIRPercent
The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPo…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18
tSapIngPolicerRateType
The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specif…
columnTIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19
tSapIngPolicerRowStatus
tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2
tSapIngPolicerSlopeStartDepth obsolete
The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0. This object is o…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20
tSapIngPolicerSlopeMaxDepth obsolete
The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21
tSapIngPolicerSlopeMaxProb obsolete
The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22
tSapIngPolicerSlopeMap obsolete
The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer. This object is obsoleted in 14.0 Release.
columnTIMETRA-TC-MIBTmnxSlopeMap.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23
tSapIngPolicerAdvCfgPolicy
The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
columnTIMETRA-TC-MIBTNamedItemOrEmpty.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24
tSapIngPolicerProfileCapped
The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the v…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25
tSapIngPolicerAdminPIRHi
The value of tSapIngPolicerAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIn…
columnkilobps TIMETRA-TC-MIBTmnxQosRateHigh32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.26
tSapIngPolicerAdminCIRHi
The value of tSapIngPolicerAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIn…
columnkilobps TIMETRA-TC-MIBTmnxQosRateHigh32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.28
tSapIngPolicerAdminCIRLo
The value of tSapIngPolicerAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIn…
columnkilobps TIMETRA-TC-MIBTmnxQosRateLow32.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.29
tSapIngPolicerLastChanged
tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3
tSapIngPolicerDescr
tSapIngPolicerDescr specifies the description of the policer.
columnTIMETRA-TC-MIBTItemDescription.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4
tSapIngPolicerPIRAdaptation
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offse…
columnTIMETRA-TC-MIBTAdaptationRule.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5
tSapIngPolicerCIRAdaptation
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offse…
columnTIMETRA-TC-MIBTAdaptationRule.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6
tSapIngPolicerParent
tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.
columnTIMETRA-TC-MIBTNamedItemOrEmpty.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7
tSapIngPolicerLevel
tSapIngPolicerLevel specifies the level of priority while feeding the parent.
columnTIMETRA-TC-MIBTLevel.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8
tSapIngPolicerWeight
tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
columnTIMETRA-TC-MIBTPolicerWeight.1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9