tSapEgressQueueAdminPIRHi
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.42
Object
The value of tSapEgressQueueAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapEgressQueueAdminPIRLo,
otherwise an 'inconsistentValue' error is returned.
When the value of tSapEgressQueueAdminPIRHi along with the value of
tSapEgressQueueAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
this queue indicates maximum rate.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.42- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kilobps
- Parent
- tSapEgressQueueEntry
- Table
- tSapEgressQueueTable
- Siblings
- 48
Syntax
kilobps TIMETRA-TC-MIBTmnxQosRateHigh32
- Source
- TIMETRA-TC-MIBTmnxQosRateHigh32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..1
range: 4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapEgressQueueIndex the number of a queue. zero is not allowed.
for sap-egress, only three queues are allowed,
so the queue index range is restricted. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1 |
| tSapEgressQueueMBS obsolete The maximum amount of buffer space (in kilobytes) allowed for the
queue.
This object has been replaced with tSapEgressQueueMBSBytes object. | column | TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10 |
| tSapEgressQueueHiPrioOnly obsolete The percentage of buffer space for the queue, used exclusively by high
priority packets.
This object is obsoleted in 15.0 release and has been replaced with
tSapEgr… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11 |
| tSapEgressQueuePIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12 |
| tSapEgressQueueCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13 |
| tSapEgressQueueAdminPIR obsolete The administrative PIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapEgressQueueAdminPIRHi
and tSapEgressQueueAdminPIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueuePIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14 |
| tSapEgressQueueAdminCIR obsolete The administrative CIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapEgressQueueAdminCIRHi
and tSapEgressQueueAdminCIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueueCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15 |
| tSapEgressQueueOperPIR obsolete The administrative PIR specified by the user. | column | kilobps TIMETRA-TC-MIBTPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16 |
| tSapEgressQueueOperCIR obsolete The operational value derived by computing the CIR value from the
administrative CIR and PIR values and their corresponding adaptation
rules. | column | kilobps TIMETRA-TC-MIBTCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17 |
| tSapEgressQueueLastChanged timestamp of last change to this row in tSapEgressQueueTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18 |
| tSapEgressQueueUsePortParent The value of the object tSapEgressQueueUsePortParent specifies whether
this queue is parented by a port-level scheduler. When the value is
'true', this SAP egress queue is parente… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19 |
| tSapEgressQueueRowStatus Row Status of the entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2 |
| tSapEgressQueuePortLvl The value of the object tSapEgressQueuePortLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its above-cir offered load. A… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20 |
| tSapEgressQueuePortWght The value of the object tSapEgressQueuePortWght specifies the weight
this queue will use to receive bandwidth from the port-level scheduler
for its above-cir offered load. An 'inc… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21 |
| tSapEgressQueuePortCIRLvl The value of the object tSapEgressQueuePortCIRLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered loa… | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22 |
| tSapEgressQueuePortCIRWght The value of the object tSapEgressQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered load. An … | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23 |
| tSapEgressQueuePortAvgOverhead The value of tSapEgressQueuePortAvgOverhead specifies the
encapsulation overhead, in centipercent, used to
translate packet-based rate to frame-based rate and vice versa. | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24 |
| tSapEgressQueuePoolName obsolete The value of tSapEgressQueuePoolName specifies the name of the pool to
be applied for SAP egress queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25 |
| tSapEgressQueueXPWredQ obsolete The value of tSapEgressQueueXPWredQ specifies whether to alter the
generic pool association of the queue for the purpose of allowing
queue-specific WRED slopes with minimal provis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26 |
| tSapEgressQueueXPWredQSlope The value of tSapEgressQueueXPWredQSlope specifies the name of the
slope policy to be applied for SAP egress queue.
An 'inconsistentValue' error is returned when th… | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27 |
| tSapEgressQueueMBSBytes The maximum amount of buffer space (in bytes) allowed for the queue. | column | bytes TIMETRA-TC-MIBTBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28 |
| tSapEgressQueueBurstLimit The value of tSapEgressQueueBurstLimit specifies the explicit shaping
burst size of a queue. | column | bytes TIMETRA-TC-MIBTBurstLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29 |
| tSapEgressQueueParent The scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3 |
| tSapEgressQueuePktOffset The value of tSapEgressQueuePktOffset specifies the per packet byte
offset for this queue. | column | bytes TIMETRA-TC-MIBTEgressQPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30 |
| tSapEgressQueueAdminPIRPercent The administrative PIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapEgressQueueAdminPIRPercent is set to non-default value when the
object tSapEgre… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31 |
| tSapEgressQueueAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapEgressQueueAdminCIRPercent is set to non-default value when the
object tSapEgre… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32 |
| tSapEgressQueueRateType The value of tSapEgressQueueRateType specifies the type of Egress
Queue rate.
When the value of the object is set to 'kbps', the ingresss queue rates
are specified … | column | TIMETRA-TC-MIBTPolicerRateTypeWithRefLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33 |
| tSapEgressQueueAdvCfgPolicy The value of tSapEgressQueueAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34 |
| tSapEgressQueueHiLowPrioOnly obsolete The value of tSapEgressQueueHiLowPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority
(exceed-profile) packets.
This o… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.35 |
| tSapEgressQueueWredQMode The value of tSapEgressQueueWredQMode specifies the generic pool
association of the queue for the purpose of allowing queue-specific
WRED slopes.
When the value of … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.36 |
| tSapEgressQueueWredQSlopeUsage The value of tSapEgressQueueWredQSlopeUsage specifies which slopes are
active for given slope-mode specified by tSapEgressQueueWredQMode.
When the value of this obj… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.37 |
| tSapEgrQDrpTailExcdReductnMbs The value of tSapEgrQDrpTailExcdReductnMbs specifies the percentage at
which exceed drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.38 |
| tSapEgrQDrpTailHiPlusReductnMbs The value of tSapEgrQDrpTailHiPlusReductnMbs specifies the percentage
at which highplus drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.39 |
| tSapEgressQueueLevel This specifies the level of priority while feeding to the parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4 |
| tSapEgrQDrpTailLowReductnMbs The value of tSapEgrQDrpTailLowReductnMbs specifies the percentage at
which low drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.40 |
| tSapEgrQDrpTailHighReductnMbs The value of tSapEgrQDrpTailHighReductnMbs specifies the percentage at
which high drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.41 |
| tSapEgressQueueAdminPIRLo The value of tSapEgressQueueAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.43 |
| tSapEgressQueueAdminCIRHi The value of tSapEgressQueueAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.44 |
| tSapEgressQueueAdminCIRLo The value of tSapEgressQueueAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.45 |
| tSapEgressQueueHsWrrWeight The value of tSapEgressQueueHsWrrWeight specifies the Weighted Round
Robin (WRR) weight which this queue should parent into the scheduler.
The weight of each queue determines how … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.46 |
| tSapEgressQueueHsClassWeight The value of tSapEgressQueueHsClassWeight specifies the weight of the
scheduling class. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.47 |
| tSapEgressQueueHsWredQSlopePlcy The value of tSapEgressQueueHsWredQSlopePlcy specifies the name of the
slope policy to be applied for network-queue queue. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.48 |
| tSapEgressQueueHsAltClssPool The value of tSapEgressQueueHsAltClssPool specifies whether the HS
alternate class port pool buffer should be used for traffic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.49 |
| tSapEgressQueueWeight The weight that needs to be used by the scheduler to which this queue
would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5 |
| tSapEgressQueueCIRLevel This specifies the level of priority while feeding to the parent. The
level '0' means treat all offered load for this queue as for the above
CIR traffic. | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6 |
| tSapEgressQueueCIRWeight The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7 |
| tSapEgressQueueExpedite tSapEgressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this att… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8 |
| tSapEgressQueueCBS The amount of reserved buffer space (in kilobytes) for the queue. | column | TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9 |