tSapEgrQDrpTailLowReductnMbs
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.40
Object
The value of tSapEgrQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tSapEgressQueueMBSBytes.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.40- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tSapEgressQueueEntry
- Table
- tSapEgressQueueTable
- Siblings
- 48
Syntax
TIMETRA-TC-MIBTBurstPercentOrDefault
- Source
- TIMETRA-TC-MIBTBurstPercentOrDefault
- Base type
Integer32
Values & Constraints
Type Constraints
range: -1..100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapEgressQueueIndex the number of a queue. zero is not allowed.
for sap-egress, only three queues are allowed,
so the queue index range is restricted. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1 |
| tSapEgressQueueMBS obsolete The maximum amount of buffer space (in kilobytes) allowed for the
queue.
This object has been replaced with tSapEgressQueueMBSBytes object. | column | TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10 |
| tSapEgressQueueHiPrioOnly obsolete The percentage of buffer space for the queue, used exclusively by high
priority packets.
This object is obsoleted in 15.0 release and has been replaced with
tSapEgr… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11 |
| tSapEgressQueuePIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12 |
| tSapEgressQueueCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13 |
| tSapEgressQueueAdminPIR obsolete The administrative PIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapEgressQueueAdminPIRHi
and tSapEgressQueueAdminPIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueuePIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14 |
| tSapEgressQueueAdminCIR obsolete The administrative CIR specified by the user. This object is obsoleted
in 15.0 release and has been replaced with tSapEgressQueueAdminCIRHi
and tSapEgressQueueAdminCIRLo objects. | column | kilobps TIMETRA-TC-MIBTQosQueueCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15 |
| tSapEgressQueueOperPIR obsolete The administrative PIR specified by the user. | column | kilobps TIMETRA-TC-MIBTPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16 |
| tSapEgressQueueOperCIR obsolete The operational value derived by computing the CIR value from the
administrative CIR and PIR values and their corresponding adaptation
rules. | column | kilobps TIMETRA-TC-MIBTCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17 |
| tSapEgressQueueLastChanged timestamp of last change to this row in tSapEgressQueueTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18 |
| tSapEgressQueueUsePortParent The value of the object tSapEgressQueueUsePortParent specifies whether
this queue is parented by a port-level scheduler. When the value is
'true', this SAP egress queue is parente… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19 |
| tSapEgressQueueRowStatus Row Status of the entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2 |
| tSapEgressQueuePortLvl The value of the object tSapEgressQueuePortLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its above-cir offered load. A… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20 |
| tSapEgressQueuePortWght The value of the object tSapEgressQueuePortWght specifies the weight
this queue will use to receive bandwidth from the port-level scheduler
for its above-cir offered load. An 'inc… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21 |
| tSapEgressQueuePortCIRLvl The value of the object tSapEgressQueuePortCIRLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered loa… | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22 |
| tSapEgressQueuePortCIRWght The value of the object tSapEgressQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered load. An … | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23 |
| tSapEgressQueuePortAvgOverhead The value of tSapEgressQueuePortAvgOverhead specifies the
encapsulation overhead, in centipercent, used to
translate packet-based rate to frame-based rate and vice versa. | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24 |
| tSapEgressQueuePoolName obsolete The value of tSapEgressQueuePoolName specifies the name of the pool to
be applied for SAP egress queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25 |
| tSapEgressQueueXPWredQ obsolete The value of tSapEgressQueueXPWredQ specifies whether to alter the
generic pool association of the queue for the purpose of allowing
queue-specific WRED slopes with minimal provis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26 |
| tSapEgressQueueXPWredQSlope The value of tSapEgressQueueXPWredQSlope specifies the name of the
slope policy to be applied for SAP egress queue.
An 'inconsistentValue' error is returned when th… | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27 |
| tSapEgressQueueMBSBytes The maximum amount of buffer space (in bytes) allowed for the queue. | column | bytes TIMETRA-TC-MIBTBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28 |
| tSapEgressQueueBurstLimit The value of tSapEgressQueueBurstLimit specifies the explicit shaping
burst size of a queue. | column | bytes TIMETRA-TC-MIBTBurstLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29 |
| tSapEgressQueueParent The scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3 |
| tSapEgressQueuePktOffset The value of tSapEgressQueuePktOffset specifies the per packet byte
offset for this queue. | column | bytes TIMETRA-TC-MIBTEgressQPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30 |
| tSapEgressQueueAdminPIRPercent The administrative PIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapEgressQueueAdminPIRPercent is set to non-default value when the
object tSapEgre… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31 |
| tSapEgressQueueAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if
tSapEgressQueueAdminCIRPercent is set to non-default value when the
object tSapEgre… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32 |
| tSapEgressQueueRateType The value of tSapEgressQueueRateType specifies the type of Egress
Queue rate.
When the value of the object is set to 'kbps', the ingresss queue rates
are specified … | column | TIMETRA-TC-MIBTPolicerRateTypeWithRefLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33 |
| tSapEgressQueueAdvCfgPolicy The value of tSapEgressQueueAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34 |
| tSapEgressQueueHiLowPrioOnly obsolete The value of tSapEgressQueueHiLowPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority
(exceed-profile) packets.
This o… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.35 |
| tSapEgressQueueWredQMode The value of tSapEgressQueueWredQMode specifies the generic pool
association of the queue for the purpose of allowing queue-specific
WRED slopes.
When the value of … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.36 |
| tSapEgressQueueWredQSlopeUsage The value of tSapEgressQueueWredQSlopeUsage specifies which slopes are
active for given slope-mode specified by tSapEgressQueueWredQMode.
When the value of this obj… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.37 |
| tSapEgrQDrpTailExcdReductnMbs The value of tSapEgrQDrpTailExcdReductnMbs specifies the percentage at
which exceed drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.38 |
| tSapEgrQDrpTailHiPlusReductnMbs The value of tSapEgrQDrpTailHiPlusReductnMbs specifies the percentage
at which highplus drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.39 |
| tSapEgressQueueLevel This specifies the level of priority while feeding to the parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4 |
| tSapEgrQDrpTailHighReductnMbs The value of tSapEgrQDrpTailHighReductnMbs specifies the percentage at
which high drop tail is being reduced from the MBS specified by
tSapEgressQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.41 |
| tSapEgressQueueAdminPIRHi The value of tSapEgressQueueAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.42 |
| tSapEgressQueueAdminPIRLo The value of tSapEgressQueueAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.43 |
| tSapEgressQueueAdminCIRHi The value of tSapEgressQueueAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.44 |
| tSapEgressQueueAdminCIRLo The value of tSapEgressQueueAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapE… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.45 |
| tSapEgressQueueHsWrrWeight The value of tSapEgressQueueHsWrrWeight specifies the Weighted Round
Robin (WRR) weight which this queue should parent into the scheduler.
The weight of each queue determines how … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.46 |
| tSapEgressQueueHsClassWeight The value of tSapEgressQueueHsClassWeight specifies the weight of the
scheduling class. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.47 |
| tSapEgressQueueHsWredQSlopePlcy The value of tSapEgressQueueHsWredQSlopePlcy specifies the name of the
slope policy to be applied for network-queue queue. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.48 |
| tSapEgressQueueHsAltClssPool The value of tSapEgressQueueHsAltClssPool specifies whether the HS
alternate class port pool buffer should be used for traffic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.49 |
| tSapEgressQueueWeight The weight that needs to be used by the scheduler to which this queue
would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5 |
| tSapEgressQueueCIRLevel This specifies the level of priority while feeding to the parent. The
level '0' means treat all offered load for this queue as for the above
CIR traffic. | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6 |
| tSapEgressQueueCIRWeight The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7 |
| tSapEgressQueueExpedite tSapEgressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this att… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8 |
| tSapEgressQueueCBS The amount of reserved buffer space (in kilobytes) for the queue. | column | TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9 |