tSapEgrPolicerSchedLevel
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.4.8.1.30
Object
The value of tSapEgrPolicerSchedLevel specifies the level of priority
while feeding to the parent.
The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel,
tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and
tSapEgrPolicerSchedCIRWeight are mutually exclusive to
tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl,
tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and
tSapEgrPolicerSchedPortCIRWght.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.4.8.1.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tSapEgrPolicerEntry
- Table
- tSapEgrPolicerTable
- Siblings
- 41
Syntax
TIMETRA-TC-MIBTLevel
- Source
- TIMETRA-TC-MIBTLevel
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapEgrPolicerId tSapEgrPolicerId defines the SAP Egress Policer identifier. It
identifies an sap-egress policer in the managed system. | column | TIMETRA-TC-MIBTEgressPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1 |
| tSapEgrPolicerAdminPIR obsolete tSapEgrPolicerAdminPIR specifies the administrative PIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapEgrPolicerAdminPIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10 |
| tSapEgrPolicerAdminCIR obsolete tSapEgrPolicerAdminCIR specifies the administrative CIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapEgrPolicerAdminCIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11 |
| tSapEgrPolicerStatMode tSapEgrPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxEgrPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12 |
| tSapEgrPolicerMBS The tSapEgrPolicerMBS specifies the high priority 'violate' threshold
of PIR leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13 |
| tSapEgrPolicerHiPrioOnly The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky
bucket's MBS (maximum burst size) of this policer that is reserved for
high priority traffic. | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14 |
| tSapEgrPolicerCBS The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR
leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15 |
| tSapEgrPolicerPktOffset tSapEgrPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTEgressPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16 |
| tSapEgrPolicerAdminPIRPercent The administrative PIR percentage, in centipercent. An
'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent
is set to non-default value when the object tSapEgrPo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17 |
| tSapEgrPolicerAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent
is set to non-default value when the object tSapEgrPo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18 |
| tSapEgrPolicerRateType The value of tSapEgrPolicerRateType specifies the type of egress
policer rate.
When the value of the object is set to 'kbps', the egresss policer
rates are specifie… | column | TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19 |
| tSapEgrPolicerRowStatus tSapEgrPolicerRowStatus allows entries to be created and deleted in
the tSapEgrPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2 |
| tSapEgrPolicerSlopeStartDepth obsolete The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20 |
| tSapEgrPolicerSlopeMaxDepth obsolete The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21 |
| tSapEgrPolicerSlopeMaxProb obsolete The value of tSapEgrPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22 |
| tSapEgrPolicerSlopeMap obsolete The value of tSapEgrPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23 |
| tSapEgrPolicerAdvCfgPolicy The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24 |
| tSapEgrPolicerProfileCapped The value of tSapEgrPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
egress policer.
When the va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25 |
| tSapEgrPolicerProfileOutPreserve The value of tSapEgrPolicerProfileOutPreserve specifies whether to
preserve the color of offered out-of-profile traffic at sap-egress
policer (profile of the packet can change bas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.26 |
| tSapEgrPolicerEnableExceedPir The value of tSapEgrPolicerEnableExceedPir specifies whether to enable
exceeding of PIR for sap-egress policer, i.e., whether the traffic
should be forwarded as exceed-profile ins… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.27 |
| tSapEgrPolicerEnblDscpPrecRemark The value of tSapEgrPolicerEnblDscpPrecRemark specifies whether to
enable remarking for DSCP and Precedence based on the profile state of
a packet being forwarded by sap-egress po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.28 |
| tSapEgrPolicerSchedParent The value of tSapEgrPolicerSchedParent specifies the scheduler to
which this policer would be feeding to.
The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSched… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.29 |
| tSapEgrPolicerLastChanged tSapEgrPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3 |
| tSapEgrPolicerSchedWeight The value of tSapEgrPolicerSchedWeight specifies the weight that needs
to be used by the scheduler to which this policer would be feeding to.
The objects tSapEgrPol… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.31 |
| tSapEgrPolicerSchedCIRLevel The value of tSapEgrPolicerSchedCIRLevel specifies the level of
priority while feeding to the parent. The level '0' means treat all
offered load for this policer as for the above … | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.32 |
| tSapEgrPolicerSchedCIRWeight The value of tSapEgrPolicerSchedCIRWeight specifies the weight that
needs to be used until the committed rate by the scheduler to which
this policer would be feeding to.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.33 |
| tSapEgrPolicerSchedUsePortParent The value of tSapEgrPolicerSchedUsePortParent specifies whether this
queue is parented by a port-level scheduler. When the value is 'true',
this sap-egress policer is parented by … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.34 |
| tSapEgrPolicerSchedPortLvl The value of the tSapEgrPolicerSchedPortLvl specifies the port
priority this policer will use to receive bandwidth from the
port-level scheduler for its above-cir offered load.
… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.35 |
| tSapEgrPolicerSchedPortWght The value of the tSapEgrPolicerSchedPortWght specifies the weight this
policer will use to receive bandwidth from the port-level scheduler
for its above-cir offered load.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.36 |
| tSapEgrPolicerSchedPortCIRLvl The value of the tSapEgrPolicerSchedPortCIRLvl specifies the port
priority this policer will use to receive bandwidth from the
port-level scheduler for its within-cir offered load… | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.37 |
| tSapEgrPolicerSchedPortCIRWght The value of the tSapEgrPolicerSchedPortCIRWght specifies the weight
this policer will use to receive bandwidth from the port-level
scheduler for its within-cir offered load.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.38 |
| tSapEgrPolicerAdminPIRHi The value of tSapEgrPolicerAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.39 |
| tSapEgrPolicerDescr tSapEgrPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4 |
| tSapEgrPolicerAdminPIRLo The value of tSapEgrPolicerAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.40 |
| tSapEgrPolicerAdminCIRHi The value of tSapEgrPolicerAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.41 |
| tSapEgrPolicerAdminCIRLo The value of tSapEgrPolicerAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.42 |
| tSapEgrPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5 |
| tSapEgrPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6 |
| tSapEgrPolicerParent tSapEgrPolicerParent specifies the arbiter to which this queue would
be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7 |
| tSapEgrPolicerLevel tSapEgrPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8 |
| tSapEgrPolicerWeight tSapEgrPolicerWeight specifies the weight that needs to be used by the
arbiter to which this queue would be feeding. | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9 |