tSapEgrPolicerAdminPIRPercent
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17
Object
column
r/w
centipercent Unsigned32
The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Units
- centipercent
- Parent
- tSapEgrPolicerEntry
- Table
- tSapEgrPolicerTable
- Siblings
- 41
Syntax
centipercent Unsigned32
Values & Constraints
Object Constraints
range: 1-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSapEgrPolicerId tSapEgrPolicerId defines the SAP Egress Policer identifier. It
identifies an sap-egress policer in the managed system. | column | TIMETRA-TC-MIBTEgressPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1 |
| tSapEgrPolicerAdminPIR obsolete tSapEgrPolicerAdminPIR specifies the administrative PIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapEgrPolicerAdminPIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10 |
| tSapEgrPolicerAdminCIR obsolete tSapEgrPolicerAdminCIR specifies the administrative CIR specified by
the user. This object is obsoleted in 15.0 release and has been
replaced with tSapEgrPolicerAdminCIRHi and tSa… | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11 |
| tSapEgrPolicerStatMode tSapEgrPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxEgrPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12 |
| tSapEgrPolicerMBS The tSapEgrPolicerMBS specifies the high priority 'violate' threshold
of PIR leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13 |
| tSapEgrPolicerHiPrioOnly The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky
bucket's MBS (maximum burst size) of this policer that is reserved for
high priority traffic. | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14 |
| tSapEgrPolicerCBS The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR
leaky bucket of this policer. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15 |
| tSapEgrPolicerPktOffset tSapEgrPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTEgressPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16 |
| tSapEgrPolicerAdminCIRPercent The administrative CIR percentage, in centipercent. An
'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent
is set to non-default value when the object tSapEgrPo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18 |
| tSapEgrPolicerRateType The value of tSapEgrPolicerRateType specifies the type of egress
policer rate.
When the value of the object is set to 'kbps', the egresss policer
rates are specifie… | column | TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19 |
| tSapEgrPolicerRowStatus tSapEgrPolicerRowStatus allows entries to be created and deleted in
the tSapEgrPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2 |
| tSapEgrPolicerSlopeStartDepth obsolete The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20 |
| tSapEgrPolicerSlopeMaxDepth obsolete The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21 |
| tSapEgrPolicerSlopeMaxProb obsolete The value of tSapEgrPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22 |
| tSapEgrPolicerSlopeMap obsolete The value of tSapEgrPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23 |
| tSapEgrPolicerAdvCfgPolicy The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24 |
| tSapEgrPolicerProfileCapped The value of tSapEgrPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
egress policer.
When the va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25 |
| tSapEgrPolicerProfileOutPreserve The value of tSapEgrPolicerProfileOutPreserve specifies whether to
preserve the color of offered out-of-profile traffic at sap-egress
policer (profile of the packet can change bas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.26 |
| tSapEgrPolicerEnableExceedPir The value of tSapEgrPolicerEnableExceedPir specifies whether to enable
exceeding of PIR for sap-egress policer, i.e., whether the traffic
should be forwarded as exceed-profile ins… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.27 |
| tSapEgrPolicerEnblDscpPrecRemark The value of tSapEgrPolicerEnblDscpPrecRemark specifies whether to
enable remarking for DSCP and Precedence based on the profile state of
a packet being forwarded by sap-egress po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.28 |
| tSapEgrPolicerSchedParent The value of tSapEgrPolicerSchedParent specifies the scheduler to
which this policer would be feeding to.
The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSched… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.29 |
| tSapEgrPolicerLastChanged tSapEgrPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3 |
| tSapEgrPolicerSchedLevel The value of tSapEgrPolicerSchedLevel specifies the level of priority
while feeding to the parent.
The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel,
… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.30 |
| tSapEgrPolicerSchedWeight The value of tSapEgrPolicerSchedWeight specifies the weight that needs
to be used by the scheduler to which this policer would be feeding to.
The objects tSapEgrPol… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.31 |
| tSapEgrPolicerSchedCIRLevel The value of tSapEgrPolicerSchedCIRLevel specifies the level of
priority while feeding to the parent. The level '0' means treat all
offered load for this policer as for the above … | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.32 |
| tSapEgrPolicerSchedCIRWeight The value of tSapEgrPolicerSchedCIRWeight specifies the weight that
needs to be used until the committed rate by the scheduler to which
this policer would be feeding to.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.33 |
| tSapEgrPolicerSchedUsePortParent The value of tSapEgrPolicerSchedUsePortParent specifies whether this
queue is parented by a port-level scheduler. When the value is 'true',
this sap-egress policer is parented by … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.34 |
| tSapEgrPolicerSchedPortLvl The value of the tSapEgrPolicerSchedPortLvl specifies the port
priority this policer will use to receive bandwidth from the
port-level scheduler for its above-cir offered load.
… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.35 |
| tSapEgrPolicerSchedPortWght The value of the tSapEgrPolicerSchedPortWght specifies the weight this
policer will use to receive bandwidth from the port-level scheduler
for its above-cir offered load.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.36 |
| tSapEgrPolicerSchedPortCIRLvl The value of the tSapEgrPolicerSchedPortCIRLvl specifies the port
priority this policer will use to receive bandwidth from the
port-level scheduler for its within-cir offered load… | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.37 |
| tSapEgrPolicerSchedPortCIRWght The value of the tSapEgrPolicerSchedPortCIRWght specifies the weight
this policer will use to receive bandwidth from the port-level
scheduler for its within-cir offered load.
… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.38 |
| tSapEgrPolicerAdminPIRHi The value of tSapEgrPolicerAdminPIRHi specifies the upper 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.39 |
| tSapEgrPolicerDescr tSapEgrPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4 |
| tSapEgrPolicerAdminPIRLo The value of tSapEgrPolicerAdminPIRLo specifies the lower 32 bits of
the administrative PIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.40 |
| tSapEgrPolicerAdminCIRHi The value of tSapEgrPolicerAdminCIRHi specifies the upper 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.41 |
| tSapEgrPolicerAdminCIRLo The value of tSapEgrPolicerAdminCIRLo specifies the lower 32 bits of
the administrative CIR specified by the user.
This value should always be set along with tSapEg… | column | kilobps TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.42 |
| tSapEgrPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5 |
| tSapEgrPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6 |
| tSapEgrPolicerParent tSapEgrPolicerParent specifies the arbiter to which this queue would
be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7 |
| tSapEgrPolicerLevel tSapEgrPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8 |
| tSapEgrPolicerWeight tSapEgrPolicerWeight specifies the weight that needs to be used by the
arbiter to which this queue would be feeding. | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9 |