tQosIngPolicerSlopeStartDepth
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18
Object
column
obsolete
r/w
centipercent Unsigned32
The value of tQosIngPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is obsoleted in 14.0 Release.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18- Type
- column
- Access
- readwrite
- Status
- obsolete
- Units
- centipercent
- Parent
- tQosIngPolicerEntry
- Table
- tQosIngPolicerTable
- Siblings
- 24
Syntax
centipercent Unsigned32
Values & Constraints
Object Constraints
range: 1-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tQosIngPolicerId tQosIngPolicerId defines the Ingress Queue Group Policer identifier.
It identifies an ingress queue group policer in the managed system. | column | TIMETRA-TC-MIBTIngPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1 |
| tQosIngPolicerAdminPIR tQosIngPolicerAdminPIR specifies the administrative PIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10 |
| tQosIngPolicerAdminCIR tQosIngPolicerAdminCIR specifies the administrative CIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11 |
| tQosIngPolicerCBS tQosIngPolicerCBS specifies the amount of reserved buffer space (in
bytes) used to configure the policer's CIR leaky bucket's 'exceed'
threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12 |
| tQosIngPolicerMBS tQosIngPolicerMBS specifies the maximum amount of buffer space (in
bytes) used to configure the policer's PIR leaky bucket's high
priority 'violate' threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13 |
| tQosIngPolicerHiPrioOnly tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for
the queue, used to configure the percentage of the policer's PIR leaky
bucket's MBS (maximum burst size) that… | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14 |
| tQosIngPolicerPktOffset tQosIngPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15 |
| tQosIngPolicerProfileCapped The value of tQosIngPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
ingress policer.
When the v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16 |
| tQosIngPolicerStatMode tQosIngPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxIngPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17 |
| tQosIngPolicerSlopeMaxDepth obsolete The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19 |
| tQosIngPolicerRowStatus tQosIngPolicerRowStatus allows entries to be created and deleted in
the tQosIngPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2 |
| tQosIngPolicerSlopeMaxProb obsolete The value of tQosIngPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tQosIngPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20 |
| tQosIngPolicerSlopeMap obsolete The value of tQosIngPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21 |
| tQosIngPolicerAdvCfgPolicy The value of tQosIngPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22 |
| tQosIngPolicerAdminPIRPercent The value of tQosIngPolicerAdminPIRPercent specifies the
administrative PIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosIngPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.23 |
| tQosIngPolicerAdminCIRPercent The value of tQosIngPolicerAdminCIRPercent specifies the
administrative CIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosIngPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.24 |
| tQosIngPolicerAdminRateType The value of tQosIngPolicerAdminRateType specifies the type of rate
for this policer.
When the value of the object is set to 'kbps', the policer rates are
specified… | column | TIMETRA-TC-MIBTRateType | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.25 |
| tQosIngPolicerLastChanged tQosIngPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3 |
| tQosIngPolicerDescr tQosIngPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4 |
| tQosIngPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5 |
| tQosIngPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6 |
| tQosIngPolicerParent tQosIngPolicerParent specifies the arbiter to which this policer would
be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7 |
| tQosIngPolicerLevel tQosIngPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8 |
| tQosIngPolicerWeight tQosIngPolicerWeight specifies the weight that needs to be used by the
arbiter to which this policer would be feeding | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9 |