tQosIngPolicerAdminPIR
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10
Object
tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kilobps
- Parent
- tQosIngPolicerEntry
- Table
- tQosIngPolicerTable
- Siblings
- 24
Syntax
kilobps TIMETRA-TC-MIBTHPolPIRRate
- Source
- TIMETRA-TC-MIBTHPolPIRRate
- Base type
Integer32
Values & Constraints
Type Constraints
range: -1
range: 1..2000000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tQosIngPolicerId tQosIngPolicerId defines the Ingress Queue Group Policer identifier.
It identifies an ingress queue group policer in the managed system. | column | TIMETRA-TC-MIBTIngPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1 |
| tQosIngPolicerAdminCIR tQosIngPolicerAdminCIR specifies the administrative CIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11 |
| tQosIngPolicerCBS tQosIngPolicerCBS specifies the amount of reserved buffer space (in
bytes) used to configure the policer's CIR leaky bucket's 'exceed'
threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12 |
| tQosIngPolicerMBS tQosIngPolicerMBS specifies the maximum amount of buffer space (in
bytes) used to configure the policer's PIR leaky bucket's high
priority 'violate' threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13 |
| tQosIngPolicerHiPrioOnly tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for
the queue, used to configure the percentage of the policer's PIR leaky
bucket's MBS (maximum burst size) that… | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14 |
| tQosIngPolicerPktOffset tQosIngPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15 |
| tQosIngPolicerProfileCapped The value of tQosIngPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
ingress policer.
When the v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16 |
| tQosIngPolicerStatMode tQosIngPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxIngPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17 |
| tQosIngPolicerSlopeStartDepth obsolete The value of tQosIngPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18 |
| tQosIngPolicerSlopeMaxDepth obsolete The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19 |
| tQosIngPolicerRowStatus tQosIngPolicerRowStatus allows entries to be created and deleted in
the tQosIngPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2 |
| tQosIngPolicerSlopeMaxProb obsolete The value of tQosIngPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tQosIngPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20 |
| tQosIngPolicerSlopeMap obsolete The value of tQosIngPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21 |
| tQosIngPolicerAdvCfgPolicy The value of tQosIngPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22 |
| tQosIngPolicerAdminPIRPercent The value of tQosIngPolicerAdminPIRPercent specifies the
administrative PIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosIngPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.23 |
| tQosIngPolicerAdminCIRPercent The value of tQosIngPolicerAdminCIRPercent specifies the
administrative CIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosIngPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.24 |
| tQosIngPolicerAdminRateType The value of tQosIngPolicerAdminRateType specifies the type of rate
for this policer.
When the value of the object is set to 'kbps', the policer rates are
specified… | column | TIMETRA-TC-MIBTRateType | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.25 |
| tQosIngPolicerLastChanged tQosIngPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3 |
| tQosIngPolicerDescr tQosIngPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4 |
| tQosIngPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5 |
| tQosIngPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6 |
| tQosIngPolicerParent tQosIngPolicerParent specifies the arbiter to which this policer would
be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7 |
| tQosIngPolicerLevel tQosIngPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8 |
| tQosIngPolicerWeight tQosIngPolicerWeight specifies the weight that needs to be used by the
arbiter to which this policer would be feeding | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9 |