tQosEgrQueueWredQSlopeUsage
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.7.7.1.36
Object
column
r/w
Enumeration
The value of tQosEgrQueueWredQSlopeUsage specifies which slopes are
active for given slope-mode specified by tQosEgrQueueWredQMode.
When the value of this object is set to 'default (1)', the traffic is
subjected to slopes configured under tSlopePolicyTable.
When the value of this object is set to 'exceedLow (2)', the traffic
is subjected to two slopes (low and exceed) configured under
tSlopePolicyTable and a drop tail.
The value of tQosEgrQueueWredQSlopeUsage can be set to 'default (1)',
when the value of tQosEgrQueueWredQMode is set to 'poolPerQueue (2)'
and the value of tQosEgrQueueWredQSlopeUsage can be set to 'exceedLow
(2)', when the value of tQosEgrQueueWredQMode is set to 'native (1)'.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.7.7.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tQosEgrQueueEntry
- Table
- tQosEgrQueueTable
- Siblings
- 43
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notApplicable |
1 | default |
2 | exceedLow |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tQosEgrQueue The value of tQosEgrQueue identifies the queue index which is used as
the second index to the table entry. Zero is not allowed. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.1 |
| tQosEgrQueueMBS obsolete The value of tQosEgrQueueMBS specifies the maximum amount of buffer
space allowed for the queue.
This object has been replaced with tQosEgrQueueMBSBytes object. | column | kilo-bytes TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.10 |
| tQosEgrQueueHiPrioOnly obsolete The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer
space for the queue, used exclusively by high priority packets.
This object is obsoleted in 1… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.11 |
| tQosEgrQueuePIRAdaptation The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule
to be used while computing the operational PIR value. The adaptation
rule specifies the rules to compute the o… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.12 |
| tQosEgrQueueCIRAdaptation The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule
to be used while computing the operational CIR value. The adaptation
rule specifies the rules to compute the o… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.13 |
| tQosEgrQueueAdminPIR The value of tQosEgrQueueAdminPIR specifies the administrative PIR.
An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is
set to non-default value whe… | column | kilobps TIMETRA-TC-MIBTQosQueuePIRRate | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.14 |
| tQosEgrQueueAdminCIR The value of tQosEgrQueueAdminCIR specifies the administrative CIR.
An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is
set to non-default value whe… | column | kilobps TIMETRA-TC-MIBTQosQueueCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.15 |
| tQosEgrQueueLastChanged The value of tQosEgrQueueLastChanged indicates the timestamp of last
change to this row in tQosEgrQueueTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.18 |
| tQosEgrQueueUsePortParent The value of tQosEgrQueueUsePortParent specifies whether this queue is
parented by a port-level scheduler. When the value is 'true', this SAP
egress queue is parented by a port-le… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.19 |
| tQosEgrQueueRowStatus This is the Row Status of the entry. This allows creation/deletion of
rows in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.2 |
| tQosEgrQueuePortLvl The value of the object tQosEgrQueuePortLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its above-cir offered load. An '… | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.20 |
| tQosEgrQueuePortWght The value of the object tQosEgrQueuePortWght specifies the weight this
queue will use to receive bandwidth from the port-level scheduler for
its above-cir offered load. An 'incons… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.21 |
| tQosEgrQueuePortCIRLvl The value of the object tQosEgrQueuePortCIRLvl specifies the port
priority this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered load. … | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.22 |
| tQosEgrQueuePortCIRWght The value of the object tQosEgrQueuePortCIRWght specifies the weight
this queue will use to receive bandwidth from the port-level scheduler
for its within-cir offered load. An 'in… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.23 |
| tQosEgrQueuePoolName obsolete The value of tQosEgrQueuePoolName specifies the name of the pool to be
applied for SAP egress queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.24 |
| tQosEgrQueueXPWredQ obsolete The value of tQosEgrQueueXPWredQ specifies whether to alter the
generic pool association of the queue for the purpose of allowing
queue-specific WRED slopes with minimal provision… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.25 |
| tQosEgrQueueXPWredQSlope The value of tQosEgrQueueXPWredQSlope specifies the name of the slope
policy to be applied for QOS egress queue.
When tQosEgrQueueXPWredQ has the value 'false', an … | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.26 |
| tQosEgrQueueMBSBytes The value of tQosEgrQueueMBSBytes specifies the maximum amount of
buffer space allowed for the queue. | column | bytes TIMETRA-TC-MIBTBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.27 |
| tQosEgrQueueAdminPIRPercent The value of tQosEgrQueueAdminPIRPercent specifies the administrative
PIR percentage, in centipercent.
An 'inconsistentValue' error is returned if
tQosEgrQueueAdmin… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.28 |
| tQosEgrQueueAdminCIRPercent The value of tQosEgrQueueAdminCIRPercent specifies the administrative
CIR percentage, in centipercent.
An 'inconsistentValue' error is returned if
tQosEgrQueueAdmin… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.29 |
| tQosEgrQueueParent The value of tQosEgrQueueParent specifies the scheduler to which this
queue would be feeding. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.3 |
| tQosEgrQueueRateType The value of tQosEgrQueueRateType specifies the type of Egress queue
rate.
When the value of the object is set to 'kbps', the egresss queue rates
are specified in k… | column | TIMETRA-TC-MIBTPolicerRateTypeWithRefLimit | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.30 |
| tQosEgrQueueBurstLimit The value of tQosEgrQueueBurstLimit specifies the explicit shaping
burst size of a queue. | column | bytes TIMETRA-TC-MIBTBurstLimit | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.31 |
| tQosEgrQueueAdvCfgPolicy The value of tQosEgrQueueAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this queue. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.32 |
| tQosEgrQueuePktOffset The value of tQosEgrQueuePktOffset specifies the packet byte
offset to be applied with this queue. | column | TIMETRA-TC-MIBTEgressPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.33 |
| tQosEgrQueueHiLowPrioOnly obsolete The value of tQosEgrQueueHiLowPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority
(exceed-profile) packets.
This obje… | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.34 |
| tQosEgrQueueWredQMode The value of tQosEgrQueueWredQMode specifies the generic pool
association of the queue for the purpose of allowing queue-specific
WRED slopes.
When the value of thi… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.35 |
| tQosEgrQueueDynamicMbs The value of tQosEgrQueueDynamicMbs specifies whether to enable the
support for dynamically modifying the MBS size of a queue in order to
maintain the maximum latency for traffic … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.37 |
| tQosEgrQueueQueueDelay The value of tQosEgrQueueQueueDelay specifies the target queue-delay
for packets forward through this queue. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.38 |
| tQosEgrQDrpTailExcdReductnMbs The value of tQosEgrQDrpTailExcdReductnMbs specifies the percentage at
which exceed drop tail is being reduced from the MBS specified by
tQosEgrQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.39 |
| tQosEgrQueueLevel The value of tQosEgrQueueLevel specifies the level of priority while
feeding the parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.4 |
| tQosEgrQDrpTailHiPlusReductnMbs The value of tQosEgrQDrpTailHiPlusReductnMbs specifies the percentage
at which highplus drop tail is being reduced from the MBS specified by
tQosEgrQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.40 |
| tQosEgrQDrpTailLowReductnMbs The value of tQosEgrQDrpTailLowReductnMbs specifies the percentage at
which low drop tail is being reduced from the MBS specified by
tQosEgrQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.41 |
| tQosEgrQDrpTailHighReductnMbs The value of tQosEgrQDrpTailHighReductnMbs specifies the percentage at
which high drop tail is being reduced from the MBS specified by
tQosEgrQueueMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.42 |
| tQosEgrQueueHsWrrWeight The value of tQosEgrQueueHsWrrWeight specifies the Weighted Round
Robin (WRR) weight which this queue should parent into the scheduler.
The weight of each queue determines how muc… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.43 |
| tQosEgrQueueHsClassWeight The value of tQosEgrQueueHsClassWeight specifies the weight of the
scheduling class. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.44 |
| tQosEgrQueueHsWredQSlopePlcy The value of tQosEgrQueueHsWredQSlopePlcy specifies the name of the
slope policy to be applied for egress queue-group templates queue. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.45 |
| tQosEgrQueueHsAltClssPool The value of tQosEgrQueueHsAltClssPool specifies whether the HS
alternate class port pool buffer should be used for traffic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.46 |
| tQosEgrQueueWeight The value of tQosEgrQueueWeight specifies the weight that needs to be
used by the scheduler to which this queue would be feeding. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.5 |
| tQosEgrQueueCIRLevel The value of tQosEgrQueueCIRLevel specifies the level of priority
while feeding the parent. The level '0' means treat all offered
load for this queue as for the above CIR traffic. | column | TIMETRA-TC-MIBTLevelOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.6 |
| tQosEgrQueueCIRWeight The value of tQosEgrQueueCIRWeight specifies the weight that needs to
be used until the committed rate by the scheduler to which this queue
would be feeding. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.7 |
| tQosEgrQueueExpedite The value of tQosEgrQueueExpedite specifies the priority that this
queue should be assigned by the hardware level schedulers. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.8 |
| tQosEgrQueueCBS The value of tQosEgrQueueCBS specifies the amount of reserved buffer
space for the queue. | column | kilo-bytes TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.16.7.7.1.9 |