tQosEgrPolicerSlopeMaxDepth
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20
Object
column
obsolete
r/w
centipercent Unsigned32
The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this point will be dropped.
This object is obsoleted in 14.0 Release.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20- Type
- column
- Access
- readwrite
- Status
- obsolete
- Units
- centipercent
- Parent
- tQosEgrPolicerEntry
- Table
- tQosEgrPolicerTable
- Siblings
- 25
Syntax
centipercent Unsigned32
Values & Constraints
Object Constraints
range: 1-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tQosEgrPolicerId tQosEgrPolicerId defines the Egress Queue Group Policer identifier.
It identifies an egress queue group policer in the managed system. | column | TIMETRA-TC-MIBTEgrPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1 |
| tQosEgrPolicerAdminPIR tQosEgrPolicerAdminPIR specifies the administrative PIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10 |
| tQosEgrPolicerAdminCIR tQosEgrPolicerAdminCIR specifies the administrative CIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11 |
| tQosEgrPolicerCBS tQosEgrPolicerCBS specifies the amount of reserved buffer space (in
bytes) used to configure the policer's CIR leaky bucket's 'exceed'
threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12 |
| tQosEgrPolicerMBS tQosEgrPolicerMBS specifies the maximum amount of buffer space (in
bytes) used to configure the policer's PIR leaky bucket's high
priority 'violate' threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13 |
| tQosEgrPolicerHiPrioOnly tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for
the queue, used to configure the percentage of the policer's PIR leaky
bucket's MBS (maximum burst size) that… | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14 |
| tQosEgrPolicerPktOffset tQosEgrPolicerPktOffset specifies the packet byte offset for addition
of policing information by this policer. | column | TIMETRA-TC-MIBTEgressPerPacketOffset | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15 |
| tQosEgrPolicerProfileCapped The value of tQosEgrPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
egress policer.
When the va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16 |
| tQosEgrPolicerStatMode tQosEgrPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxEgrPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17 |
| tQosEgrPolicerSlopeStartDepth obsolete The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18 |
| tQosEgrPolicerRowStatus tQosEgrPolicerRowStatus allows entries to be created and deleted in
the tQosEgrPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2 |
| tQosEgrPolicerSlopeMaxProb obsolete The value of tQosEgrPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21 |
| tQosEgrPolicerSlopeMap obsolete The value of tQosEgrPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22 |
| tQosEgrPolicerAdvCfgPolicy The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23 |
| tQosEgrPolicerEnableExceedPir The value of tQosEgrPolicerEnableExceedPir specifies whether to enable
exceeding of PIR for sap-egress policer, i.e., whether the traffic
should be forwarded as exceed-profile ins… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.24 |
| tQosEgrPolicerAdminPIRPercent The value of tQosEgrPolicerAdminPIRPercent specifies the
administrative PIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosEgrPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.25 |
| tQosEgrPolicerAdminCIRPercent The value of tQosEgrPolicerAdminCIRPercent specifies the
administrative CIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosEgrPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.26 |
| tQosEgrPolicerAdminRateType The value of tQosEgrPolicerAdminRateType specifies the type of rate
for this policer.
When the value of the object is set to 'kbps', the policer rates are
specified… | column | TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.27 |
| tQosEgrPolicerLastChanged tQosEgrPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3 |
| tQosEgrPolicerDescr tQosEgrPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4 |
| tQosEgrPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5 |
| tQosEgrPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6 |
| tQosEgrPolicerParent tQosEgrPolicerParent specifies the arbiter to which this policer would
be feeding | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7 |
| tQosEgrPolicerLevel tQosEgrPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8 |
| tQosEgrPolicerWeight tQosEgrPolicerWeight specifies the weight that needs to be used by the
scheduler to which this queue would be feeding. | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9 |