tQosEgrPolicerPktOffset
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15
Object
tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tQosEgrPolicerEntry
- Table
- tQosEgrPolicerTable
- Siblings
- 25
Syntax
TIMETRA-TC-MIBTEgressPerPacketOffset
- Source
- TIMETRA-TC-MIBTEgressPerPacketOffset
- Base type
Integer32
Values & Constraints
Type Constraints
range: -64..31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tQosEgrPolicerId tQosEgrPolicerId defines the Egress Queue Group Policer identifier.
It identifies an egress queue group policer in the managed system. | column | TIMETRA-TC-MIBTEgrPolicerId | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1 |
| tQosEgrPolicerAdminPIR tQosEgrPolicerAdminPIR specifies the administrative PIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolPIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10 |
| tQosEgrPolicerAdminCIR tQosEgrPolicerAdminCIR specifies the administrative CIR specified by
the user. | column | kilobps TIMETRA-TC-MIBTHPolCIRRate | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11 |
| tQosEgrPolicerCBS tQosEgrPolicerCBS specifies the amount of reserved buffer space (in
bytes) used to configure the policer's CIR leaky bucket's 'exceed'
threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12 |
| tQosEgrPolicerMBS tQosEgrPolicerMBS specifies the maximum amount of buffer space (in
bytes) used to configure the policer's PIR leaky bucket's high
priority 'violate' threshold. | column | bytes TIMETRA-TC-MIBTPlcrBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13 |
| tQosEgrPolicerHiPrioOnly tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for
the queue, used to configure the percentage of the policer's PIR leaky
bucket's MBS (maximum burst size) that… | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14 |
| tQosEgrPolicerProfileCapped The value of tQosEgrPolicerProfileCapped specifies how the explicit
in-profile and undetermined profile traffic should be handled at the
egress policer.
When the va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16 |
| tQosEgrPolicerStatMode tQosEgrPolicerStatMode specifies the mode of statistics collected by
this policer. | column | TIMETRA-TC-MIBTmnxEgrPolicerStatMode | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17 |
| tQosEgrPolicerSlopeStartDepth obsolete The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of
the buffer utilized after which the drop probability starts to rise
above 0.
This object is o… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18 |
| tQosEgrPolicerRowStatus tQosEgrPolicerRowStatus allows entries to be created and deleted in
the tQosEgrPolicerTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2 |
| tQosEgrPolicerSlopeMaxDepth obsolete The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of
the buffer utilized after which the drop probability is 100 percent.
This implies that all packets beyond this… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20 |
| tQosEgrPolicerSlopeMaxProb obsolete The value of tQosEgrPolicerSlopeMaxProb specifies the drop
probability, as a percentage, when the queue depth reaches
tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21 |
| tQosEgrPolicerSlopeMap obsolete The value of tQosEgrPolicerSlopeMap specifies the slope map to be used
with this policer.
This object is obsoleted in 14.0 Release. | column | TIMETRA-TC-MIBTmnxSlopeMap | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22 |
| tQosEgrPolicerAdvCfgPolicy The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the
advanced configuration policy to be applied with this policer. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23 |
| tQosEgrPolicerEnableExceedPir The value of tQosEgrPolicerEnableExceedPir specifies whether to enable
exceeding of PIR for sap-egress policer, i.e., whether the traffic
should be forwarded as exceed-profile ins… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.24 |
| tQosEgrPolicerAdminPIRPercent The value of tQosEgrPolicerAdminPIRPercent specifies the
administrative PIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosEgrPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.25 |
| tQosEgrPolicerAdminCIRPercent The value of tQosEgrPolicerAdminCIRPercent specifies the
administrative CIR percentage, in centipercent of this policer. An
'inconsistentValue' error is returned if tQosEgrPolicer… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.26 |
| tQosEgrPolicerAdminRateType The value of tQosEgrPolicerAdminRateType specifies the type of rate
for this policer.
When the value of the object is set to 'kbps', the policer rates are
specified… | column | TIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.27 |
| tQosEgrPolicerLastChanged tQosEgrPolicerLastChanged indicates the value of sysUpTime when the
entry was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3 |
| tQosEgrPolicerDescr tQosEgrPolicerDescr specifies the description of the policer. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4 |
| tQosEgrPolicerPIRAdaptation The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5 |
| tQosEgrPolicerCIRAdaptation The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offse… | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6 |
| tQosEgrPolicerParent tQosEgrPolicerParent specifies the arbiter to which this policer would
be feeding | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7 |
| tQosEgrPolicerLevel tQosEgrPolicerLevel specifies the level of priority while feeding the
parent. | column | TIMETRA-TC-MIBTLevel | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8 |
| tQosEgrPolicerWeight tQosEgrPolicerWeight specifies the weight that needs to be used by the
scheduler to which this queue would be feeding. | column | TIMETRA-TC-MIBTPolicerWeight | .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9 |