tQosEgrPolicerHiPrioOnly

TIMETRA-QOS-MIB · .1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14
MIB view Table view

Object

column r/w percent TIMETRA-TC-MIBTBurstPercentOrDefault 
tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for
the queue, used to configure the percentage of the policer's PIR leaky
bucket's MBS (maximum burst size) that is reserved for high priority
traffic.

Context

MIB
TIMETRA-QOS-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14
Type
column
Access
readwrite
Status
current
Units
percent
Parent
tQosEgrPolicerEntry
Table
tQosEgrPolicerTable
Siblings
25

Syntax

percent TIMETRA-TC-MIBTBurstPercentOrDefault
Source
TIMETRA-TC-MIBTBurstPercentOrDefault
Base type
Integer32

Values & Constraints

Type Constraints
range: -1..100

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tQosEgrPolicerId
tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system.
columnTIMETRA-TC-MIBTEgrPolicerId.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1
tQosEgrPolicerAdminPIR
tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
columnkilobps TIMETRA-TC-MIBTHPolPIRRate.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10
tQosEgrPolicerAdminCIR
tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
columnkilobps TIMETRA-TC-MIBTHPolCIRRate.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11
tQosEgrPolicerCBS
tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
columnbytes TIMETRA-TC-MIBTPlcrBurstSizeBytes.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12
tQosEgrPolicerMBS
tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
columnbytes TIMETRA-TC-MIBTPlcrBurstSizeBytes.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13
tQosEgrPolicerPktOffset
tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
columnTIMETRA-TC-MIBTEgressPerPacketOffset.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15
tQosEgrPolicerProfileCapped
The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the va…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16
tQosEgrPolicerStatMode
tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer.
columnTIMETRA-TC-MIBTmnxEgrPolicerStatMode.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17
tQosEgrPolicerSlopeStartDepth obsolete
The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0. This object is o…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18
tQosEgrPolicerRowStatus
tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2
tQosEgrPolicerSlopeMaxDepth obsolete
The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20
tQosEgrPolicerSlopeMaxProb obsolete
The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21
tQosEgrPolicerSlopeMap obsolete
The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer. This object is obsoleted in 14.0 Release.
columnTIMETRA-TC-MIBTmnxSlopeMap.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22
tQosEgrPolicerAdvCfgPolicy
The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
columnTIMETRA-TC-MIBTNamedItemOrEmpty.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23
tQosEgrPolicerEnableExceedPir
The value of tQosEgrPolicerEnableExceedPir specifies whether to enable exceeding of PIR for sap-egress policer, i.e., whether the traffic should be forwarded as exceed-profile ins…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.24
tQosEgrPolicerAdminPIRPercent
The value of tQosEgrPolicerAdminPIRPercent specifies the administrative PIR percentage, in centipercent of this policer. An 'inconsistentValue' error is returned if tQosEgrPolicer…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.25
tQosEgrPolicerAdminCIRPercent
The value of tQosEgrPolicerAdminCIRPercent specifies the administrative CIR percentage, in centipercent of this policer. An 'inconsistentValue' error is returned if tQosEgrPolicer…
columncentipercent Unsigned32.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.26
tQosEgrPolicerAdminRateType
The value of tQosEgrPolicerAdminRateType specifies the type of rate for this policer. When the value of the object is set to 'kbps', the policer rates are specified…
columnTIMETRA-TC-MIBTPolRateTypeRefOrLocalLimit.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.27
tQosEgrPolicerLastChanged
tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3
tQosEgrPolicerDescr
tQosEgrPolicerDescr specifies the description of the policer.
columnTIMETRA-TC-MIBTItemDescription.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4
tQosEgrPolicerPIRAdaptation
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offse…
columnTIMETRA-TC-MIBTAdaptationRule.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5
tQosEgrPolicerCIRAdaptation
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offse…
columnTIMETRA-TC-MIBTAdaptationRule.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6
tQosEgrPolicerParent
tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding
columnTIMETRA-TC-MIBTNamedItemOrEmpty.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7
tQosEgrPolicerLevel
tQosEgrPolicerLevel specifies the level of priority while feeding the parent.
columnTIMETRA-TC-MIBTLevel.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8
tQosEgrPolicerWeight
tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
columnTIMETRA-TC-MIBTPolicerWeight.1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9