tAtmTdpDescrType
TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11
Object
tAtmTdpDescrType identifies the types of ATM traffic descriptor. The
default is determined by the value of tAtmTdpServCat. The following
default rules apply:
Applicable Service Category tAtmTdpDescrType
UBR clp0And1pcr
CBR clp0And1pcr
RT-VBR clp0And1pcrPlusClp0And1scr
NRT-VBR clp0And1pcrPlusClp0And1scr
Context
- MIB
- TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tAtmTdpEntry
- Table
- tAtmTdpTable
- Siblings
- 14
Syntax
TIMETRA-TC-MIBTAtmTdpDescrType
- Source
- TIMETRA-TC-MIBTAtmTdpDescrType
- Base type
Enumeration
Values & Constraints
Type Values
0 | clp0And1pcr |
1 | clp0And1pcrPlusClp0And1scr |
2 | clp0And1pcrPlusClp0scr |
3 | clp0And1pcrPlusClp0scrTag |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tAtmTdpIndex This object is used to identify an entity inside the tAtmTdpTable.
When creating a new row in the table the value of this index may be
obtained by retrieving the value of tAtmTdpI… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1 |
| tAtmTdpRowStatus tAtmTdpRowStatus is used to create/modify/delete a new row in this
table. Only createAndGo/Active/Destroy are supported | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10 |
| tAtmTdpCdvt tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in
microseconds. The following default applies for Cdvt that is
modifiable depending upon a given service category:
… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12 |
| tAtmTdpPolicing tAtmTdpPolicing determines whether ingress traffic is policed.
Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR
and NRT-VBR. This is cell-based policing.
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13 |
| tAtmTdpCLPTagging tAtmTdpCLPTagging controls the setting of the CLP bit in the
ATM cell header for egress traffic on an IES or VPRN SAP.
If disabled (the default), all traffic has the CLP bit set
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14 |
| tAtmTdpWeight The value of tAtmTdpWeight specifies the relative weight assigned to
this ATM traffic descriptor with respect to ATM VP shaper scheduling.
The value of tAtmTdpWeigh… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.15 |
| tAtmTdpSir tAtmTdpSir identifies the sustained information rate in kilobits per
second. The default Sir is determined by the Service Category. The
following default applies to Sir that is mo… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2 |
| tAtmTdpPir tAtmTdpPir identifies the peak information rate in kilobits per
second. The default Pir is determined by the Service Category. The
following default applies to Pir that is modifia… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3 |
| tAtmTdpMbs tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs
is determined by the Service Category. The following default applies
to Mbs that is modifiable depending upo… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4 |
| tAtmTdpMir tAtmTdpMir identifies the Minimum Information Rate in kilobits per
second. The default Mir is determined by the Service Category. The
following default applies for Mir that is mod… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5 |
| tAtmTdpShaping tAtmTdpShaping determines whether egress shaping should occur. The
default tAtmTdpShaping is determined by the Service Category. The
following default applies for tAtmTdpShaping d… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6 |
| tAtmTdpServCat tAtmTdpServCat determines the ATM service category. | column | ATM-TC-MIBAtmServiceCategory | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7 |
| tAtmTdpDescription The value of tAtmTdpDescription specifies an ASCII string used to
describe the ATM traffic descriptor. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8 |
| tAtmTdpLastChanged tAtmTdpLastChanged maintains the timestamp of the last change made to
a row in the Traffic Descriptor Profile Table. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9 |