tmnxOamIcmpPingCtlEgrIfIndex

TIMETRA-OAM-TEST-MIB · .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.7
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
The value of tmnxOamIcmpPingCtlEgrIfIndex specifies the ifIndex of the
interface to use to transmit the ICMP ping packets.
              
If a non-zero value is Set, it must be a known ifIndex.  The value
stored is the corresponding interface name string.  When
tmnxOamIcmpPingCtlEgrIfIndex is read, the stored interface name string
is converted to an ifIndex (zero, if the interface no longer exists),
and the ifIndex is returned.  When tmnxOamIcmpPingCtlEgrIfName is read,
the stored interface name string is returned.
              
If zero is Set, the empty string is stored in the interface name
string.  When tmnxOamIcmpPingCtlEgrIfIndex is read, zero is returned.
When tmnxOamIcmpPingCtlEgrIfName is read, the empty string is returned.
              
Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex,
tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be
set to a non-default value.  Otherwise, 'inconsistentValue' is
returned.
              
When tmnxOamPingCtlRouterInstanceName is non-default,
tmnxOamIcmpPingCtlEgrIfIndex cannot be set to a non-default value.
              
Managers are encouraged to use tmnxOamIcmpPingCtlEgrIfName (instead of
tmnxOamIcmpPingCtlEgrIfIndex) because tmnxOamIcmpPingCtlEgrIfIndex
will be deleted in a future release.

Context

MIB
TIMETRA-OAM-TEST-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.11.1.18.1.7
Type
column
Access
readwrite
Status
current
Parent
tmnxOamIcmpPingCtlEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-TEST-MIB::tmnxOamIcmpPingCtlEgrIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-TEST-MIB::tmnxOamIcmpPingCtlEgrIfIndex.<tmnxOamPingCtlOwnerIndex>.<tmnxOamPingCtlTestIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-OAM-TEST-MIB::tmnxOamIcmpPingCtlEgrIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647

Conformance

Member of
tmnxOamIcmpPingGroup