tmnxOamPmNotifThrBinLowerBound

The value of tmnxOamPmNotifThrBinLowerBound indicates the configured
lower bound (in microseconds) of the MEF-35 delay bin which is the
subject of the enclosing notification.
          
When this object is part of a tmnxOamPmThrRaise notification, the
notification was raised because the number of PDUs with delay greater
than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified
measurement interval) met or exceeded the configured threshold
tmnxOamPmCfgThrDelayRaise.
          
When this object is part of a tmnxOamPmThrClear notification, the
notification was raised because the number of PDUs with delay greater
than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified
measurement interval) was less than or equal to the configured
threshold tmnxOamPmCfgThrDelayClear.
          
For example, suppose an OAM-PM delay raise threshold is configured with
tmnxOamPmCfgThrDelayRaise = 1000 and tmnxOamPmCfgThrDelayLowestBin = 6.
Suppose the configured lower bound (i.e. tmnxOamPmCfgBinLowerBound) for
the specified bin 6 is 30,000 microseconds.  Then, if the count of PDUs
with delay at or above 30,000 microseconds (e.g.
tmnxOamPmStsDelayDmmBin2wyCount) is 1000, and a TCA is raised, this
object will report 30,000.
          
This value must be ignored if the enclosing notification is a loss TCA
(i.e. when tmnxOamPmNotifThrType is not 'delay(1)').

MIB

TIMETRA-OAM-PM-MIB

OID

.1.3.6.1.4.1.6527.3.1.2.92.3.9

Type

scalar

Access

notifyonly

Status

current

Units

microseconds

Parent

tmnxOamPmNotificationObjs

Groups

1