TIMETRA-OAM-PM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
42
Rows
42
Columns
311
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1
·
1 row entry
·
7 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgBinGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgBinGroupTable'
tmnxOamPmCfgBinGroupTable contains the configuration information for OAM Performance Monitoring bin groups.
tmnxOamPmCfgBinGroupEntry contains the configuration information for
one OAM Performance Monitoring bin group.
Bin group 1 is created by the system on a CPM restart.
The configuration of bin gr…
one OAM Performance Monitoring bin group.
Bin group 1 is created by the system on a CPM restart.
The configuration of bin gr…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgBinGroupId specifies the bin group to be
configured or read. |
TmnxOamPmBinGroupId Type Constraints: range: 1..255 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupRowStatus specifies the status of the
configuration row for the specified bin group. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupAdminStatus specifies whether or not
the specified bin group is administratively enabled. An attempt to set this object to 'disabled(2)' will be rejected if tests referrin… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupDescription specifies the descriptive
text for the specified bin group. |
TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupFdBinCount specifies the number of
Frame Delay bins to be created for the specified bin group. There is no default value for this object. A value must be provided on row … |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupFdrBinCount specifies the number of
Frame Delay Range bins to be created for the specified bin group. There is no default value for this object. A value must be provided … |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgBinGroupIfdvBinCount specifies the number of
Inter-Frame Delay Variation bins to be created for the specified bin group. There is no default value for this object. A value must b… |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.1.1.7 |
tmnxOamPmCfgBinTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.2
·
1 row entry
·
3 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgBinTable'
tmnxOamPmCfgBinTable contains the configuration information for OAM Performance Monitoring bins.
tmnxOamPmCfgBinEntry contains the configuration information for one
OAM Performance Monitoring bin.
Rows are created in this table when one (or more) of the following
objects is set:
tmnxOamPmCfgBinGroup…
OAM Performance Monitoring bin.
Rows are created in this table when one (or more) of the following
objects is set:
tmnxOamPmCfgBinGroup…
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgBinType specifies the type of the bin to be
configured or read. |
TmnxOamPmBinType Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.1 |
||||||
|
The value of tmnxOamPmCfgBinNum specifies the number of the bin to be
configured or read. |
TmnxOamPmCfgBinNum Type Constraints: range: 1..9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.2 |
||||||
|
The value of tmnxOamPmCfgBinLowerBound specifies the lower bound (in
microseconds) for the specified bin. A lower bound can be changed if the administrative state (i.e. tmnxOamPmCfgBinGroupAdminStatus) fo… |
microsecondsUnsigned32r/w Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.2.1.3 |
tmnxOamPmCfgSessTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.3
·
1 row entry
·
7 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessTable'
tmnxOamPmCfgSessTable contains the configuration information for OAM Performance Monitoring sessions.
tmnxOamPmCfgSessEntry contains the configuration information for one
OAM Performance Monitoring session.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgSessRowStatus.
An at…
OAM Performance Monitoring session.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgSessRowStatus.
An at…
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgSessName specifies the name of the session to
be configured or read. |
TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessRowStatus specifies the status of the
configuration row for the specified session. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessTestFamily specifies the type of service
(e.g. 'ethernet(1)') to be tested by the specified session. When a session is created, tmnxOamPmCfgSessRowStatus and tmnxOamPmCfgSessT… |
TmnxOamPmTestFamilyr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessType specifies the type (e.g.
'onDemand(2)') of the specified session. When a session is created, tmnxOamPmCfgSessRowStatus and tmnxOamPmCfgSessType can be specified in the sa… |
TmnxOamPmSessionTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessBinGroupId specifies the bin group to be
used by the specified session. Changing the bin group for a session deletes ALL the OAM-PM statistics for the session's tests. |
TmnxOamPmBinGroupIdr/w Type Constraints: range: 1..255 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessDescription specifies the descriptive
text for the specified session. |
TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxOamPmCfgSessOrigin indicates the mechanism used to
create this session. |
TIMETRA-TC-MIBTmnxCreateOrigin Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.3.1.7 |
tmnxOamPmCfgSessEthTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.4
·
1 row entry
·
8 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessEthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessEthTable'
tmnxOamPmCfgSessEthTable contains the Ethernet endpoint configuration information for OAM Performance Monitoring sessions.
tmnxOamPmCfgSessEthEntry contains the Ethernet endpoint configuration
information for one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOamPmCfgSe…
information for one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOamPmCfgSe…
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmCfgSessEthSrcMepId specifies the source Ethernet
Maintenance association End Point (MEP) identifier to be used by the specified session. Zero indicates a value has not been configure… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.1 |
|
The value of tmnxOamPmCfgSessEthSrcMdIndex specifies the source
Ethernet Maintenance Domain (MD) index to be used by the specified session. The source domain can be specified using tmnxOamPmCfgSessEthSrcM… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.2 |
|
The value of tmnxOamPmCfgSessEthSrcMaIndex specifies the source
Ethernet Maintenance Association (MA) index to be used by the specified session. The source association can be specified using tmnxOamPmCfgS… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.3 |
|
The value of tmnxOamPmCfgSessEthPriority specifies the value to be
copied into the priority field when launching a test PDU for the specified session. The priority value also selects the forwarding class … |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.4 |
|
The value of tmnxOamPmCfgSessEthDestMacAddr specifies the destination
MAC address for the specified session. A non-zero unicast destination MAC address is required in each test frame sent by each test bel… |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.5 |
|
The value of tmnxOamPmCfgSessEthRemoteMepId specifies the remote
Ethernet Maintenance association End Point (MEP) identifier to be used by the specified session. Zero indicates a value has not been config… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.6 |
|
The value of tmnxOamPmCfgSessEthSrcMdName specifies the name of the
source Ethernet Maintenance Domain (MD) to be used by the specified session. The source domain can be specified using tmnxOamPmCfgSessEt… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.7 |
|
The value of tmnxOamPmCfgSessEthSrcMaName specifies the name of the
source Ethernet Maintenance Association (MA) to be used by the specified session. The source association can be specified using tmnxOamP… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.4.1.8 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgDelayDmmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmTable'
tmnxOamPmCfgDelayDmmTable contains the configuration information for OAM Performance Monitoring Delay Measurement Message (DMM) tests.
tmnxOamPmCfgDelayDmmEntry contains the configuration information for
one OAM Performance Monitoring Delay Measurement Message (DMM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfg…
one OAM Performance Monitoring Delay Measurement Message (DMM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfg…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgDelayDmmRowStatus specifies the status of the
configuration row for the specified session's DMM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily othe… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmAdminStatus specifies whether or not
the specified session's DMM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tm… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmOnDmndStatus specifies the status of
the on-demand DMM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand DMM test… |
TIMETRA-TC-MIBTmnxEnabledDisabledOrNAr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmTestId specifies the test identifier
for the specified session's DMM test. When a DMM test is created, tmnxOamPmCfgDelayDmmRowStatus and tmnxOamPmCfgDelayDmmTestId must be… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmInterval specifies the elapsed time
between transmission of Y.1731 DMM PDUs for the specified session's DMM test. |
millisecondsUnsigned32r/w Constraints: range: 100-100range: 1000-1000range: 10000-10000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmDataTlvSize specifies the amount of
padding to be added to each launched Y.1731 DMM PDU for the specified session's DMM test. Zero specifies that a Data TLV should not be … |
octetsUnsigned32r/w Constraints: range: 0-0range: 3-2000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmTestDuration specifies the test
duration for the specified session's DMM test. Zero specifies a test which runs until it is manually stopped. An attempt to … |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmRunTimeLeft indicates the run time
remaining for the specified session's DMM test. For example, suppose a DMM test has the following configuration: tmnxOamP… |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgDelayDmmStrTmplName specifies the name of the
OAM-PM streaming template used by the specified DMM test. Streaming functionality is described in the DESCRIPTION clause of tmnxOamPm… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.9 |
tmnxOamPmCfgLossSlmTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.6
·
1 row entry
·
13 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgLossSlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossSlmTable'
tmnxOamPmCfgLossSlmTable contains the configuration information for OAM Performance Monitoring Synthetic Loss Message (SLM) tests.
tmnxOamPmCfgLossSlmEntry contains the configuration information for
one OAM Performance Monitoring Synthetic Loss Message (SLM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgLoss…
one OAM Performance Monitoring Synthetic Loss Message (SLM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgLoss…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgLossSlmRowStatus specifies the status of the
configuration row for the specified session's SLM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmAdminStatus specifies whether or not
the specified session's SLM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmn… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmOnDmndStatus specifies the status of
the on-demand SLM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand SLM test.… |
TIMETRA-TC-MIBTmnxEnabledDisabledOrNAr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmTestId specifies the test identifier
for the specified session's SLM test. When an SLM test is created, tmnxOamPmCfgLossSlmRowStatus and tmnxOamPmCfgLossSlmTestId must be s… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmInterval specifies the elapsed time
between transmission of Y.1731 SLM PDUs for the specified session's SLM test. |
millisecondsUnsigned32r/w Constraints: range: 100-100range: 1000-1000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmDataTlvSize specifies the amount of
padding to be added to each launched Y.1731 SLM PDU for the specified session's SLM test. Zero specifies that a Data TLV should not be a… |
octetsUnsigned32r/w Constraints: range: 0-0range: 3-2000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmTxFrmsPerDelT specifies the number of
Y.1731 SLM frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') for the specified session's SLM test. Expresse… |
framesUnsigned32r/w Constraints: range: 1-50 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmConsecDeltaTs specifies the number of
consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' for the specified session's SLM … |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmChliThreshold specifies the MEF-35
Consecutive High Loss Interval (CHLI) threshold for the specified session's SLM test. An attempt to change tmnxOamPmCfgLossSlmChliThresho… |
Unsigned32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.9 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmFlrThreshold specifies the MEF-35
Frame Loss Ratio (FLR) threshold for the specified session's SLM test. The FLR threshold is used to decide if a MEF-35 Small Time Interval… |
percentUnsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.10 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmTestDuration specifies the test
duration for the specified session's SLM test. Zero specifies a test which runs until it is manually stopped. An attempt to s… |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.11 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmRunTimeLeft indicates the run time
remaining for the specified session's SLM test. For example, suppose an SLM test has the following configuration: tmnxOamP… |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12 |
||||||||||||
|
The value of tmnxOamPmCfgLossSlmHliForceCount specifies whether or not
to count High Loss Intervals (HLIs) and Consecutive High Loss Intervals (CHLIs) when the SLM test's MEF-35 Availability state is Unavailable. … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.13 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgMeasIntvlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgMeasIntvlTable'
tmnxOamPmCfgMeasIntvlTable contains the configuration information for OAM Performance Monitoring measurement intervals.
tmnxOamPmCfgMeasIntvlEntry contains the configuration information for
the OAM Performance Monitoring measurement interval associated with
the specified session and measurement interval duration.
Rows are cr…
the OAM Performance Monitoring measurement interval associated with
the specified session and measurement interval duration.
Rows are cr…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgMeasIntvlDuration specifies the duration of
the measurement interval (e.g. 'mi15Minutes(2)') to be read or configured. |
TmnxOamPmCfgMeasIntervalDuration Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlRowStatus specifies the status of
the configuration row for the specified session and measurement interval duration. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlAccntPolicy specifies the accounting
policy for the specified session and measurement interval duration. Zero specifies that the specified session and measurement interva… |
Unsigned32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlsStored specifies the maximum number
of historical measurement intervals which can be read using SNMP Get operations. For example, suppose tmnxOamPmCfgMeasIntvlsStored is… |
Unsigned32r/w Constraints: range: 1-96 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlBoundaryTyp specifies whether or not
the start of each measurement interval is aligned to the wall clock. Values: clockAligned(1) For example, if the specified … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlClockOffset specifies the offset (in
seconds) for the start of a measurement interval. For example, the following set of values will result in each one day measurement in… |
secondsUnsigned32r/w Constraints: range: 0-86399 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlDelayTCAs specifies the
administrative state of delay Threshold Crossing Alerts (TCAs) for this measurement interval. Delay TCAs are administratively enabled if both tmnx… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlLossTCAs specifies the
administrative state of loss Threshold Crossing Alerts (TCAs) for this measurement interval. Loss TCAs are administratively enabled if both tmnxOam… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgMeasIntvlTCAs specifies the administrative
state of Threshold Crossing Alerts (TCAs) for this measurement interval. Delay TCAs are administratively enabled if both tmnxOamPmCfgMea… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.7.1.9 |
tmnxOamPmCfgSessIpTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.8
·
1 row entry
·
19 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessIpTable'
tmnxOamPmCfgSessIpTable contains the IP endpoint configuration for the IP tests belonging to OAM Performance Monitoring sessions.
tmnxOamPmCfgSessIpEntry contains the IP endpoint configuration for the
IP tests belonging to one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOam…
IP tests belonging to one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOam…
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgSessIpServiceId specifies the virtual router
to be used by IP tests belonging to the specified session. Zero specifies the Base virtual router, as defined in TIMETRA-VRTR-MIB::vRt… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.1 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpSrcAddressType specifies the address
type of tmnxOamPmCfgSessIpSrcAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.2 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpSrcAddress specifies the source IP
address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpSrcAddressType and tmnxOamPmCfgSessIpSrcAddress must … |
OctetStringr/w Constraints: range: 0-0range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.3 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDstAddressType specifies the address
type of tmnxOamPmCfgSessIpDstAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.4 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDstAddress specifies the destination IP
address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpDstAddressType and tmnxOamPmCfgSessIpDstAddress … |
OctetStringr/w Constraints: range: 0-0range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.5 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDstUdpPort specifies the destination
UDP port to be used by IP tests belonging to the specified session. Zero indicates that no destination UDP port has been configured. |
INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.6 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpBypassRouting specifies whether or not
to send the ping request (for an IP test which belongs to the specified session) to a host on a directly attached network, bypassing the routing tabl… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.7 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpEgressIfName specifies the name of the
interface to be used to transmit a ping request (for an IP test which belongs to the specified session). At most one of tmnxOamPmCfgSe… |
TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.8 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpNhAddressType specifies the address
type of tmnxOamPmCfgSessIpNhAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.9 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpNhAddress specifies the next-hop IP
address to be used by IP tests belonging to the specified session. tmnxOamPmCfgSessIpNhAddressType and tmnxOamPmCfgSessIpNhAddress must b… |
OctetStringr/w Constraints: range: 0-0range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.10 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpForwardClass specifies the forwarding
class name to be used when launching a ping request for an IP test belonging to the specified session. The forwarding class name must be present in t… |
TIMETRA-TC-MIBTFCNamer/w | .1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.11 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpProfile specifies the Quality of
Service profile to be used when launching a ping request for an IP test belonging to the specified session. |
TIMETRA-TC-MIBTProfiler/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.12 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpTtl specifies the time-to-live to be
used when launching a ping request for an IP test belonging to the specified session. |
Unsigned32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.13 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpSrcUdpPort specifies the source UDP
port to be used by IP tests belonging to the specified session. A source UDP port is allocated when the TWAMP-Light test for the specifie… |
Unsigned32r/w Constraints: range: 0-0range: 64374-64383 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.14 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDoNotFragment specifies whether or not
the IPv4 Don't Fragment (DF) bit is set in each echo request packet launched for each test belonging to the specified session. When tm… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.15 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDscpName specifies the Differentiated
Services Code Point (DSCP) to be copied into the IP header of each echo request packet launched for each test belonging to the specified session. … |
TIMETRA-TC-MIBTDSCPNameOrEmptyr/w | .1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.16 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpDscpEgrRemark specifies whether or not
to allow each echo request packet's IP header Differentiated Services Code Point (DSCP) to be overwritten in accordance with the egress port's Qualit… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.17 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpPadPattern specifies a two octet pattern
to be repeated to fill the padding field of each echo request packet launched for each test belonging to the specified session. For example, if 25… |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.18 |
||||||||||||||
|
The value of tmnxOamPmCfgSessIpRouterInstName specifies the name of
the virtual router to be used by tests belonging to the specified session. The following values are supported: 1. '' (i.e. the empty st… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.8.1.19 |
tmnxOamPmCfgTwampLtTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.9
·
1 row entry
·
15 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgTwampLtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwampLtTable'
tmnxOamPmCfgTwampLtTable contains the configuration information for OAM Performance Monitoring TWAMP-Light (Two-Way Active Measurement Protocol, Light) tests.
tmnxOamPmCfgTwampLtEntry contains the configuration information for
the OAM Performance Monitoring TWAMP-Light test for the specified
session.
Rows are created or destroyed by SNMP Set operations on
tmnxOam…
the OAM Performance Monitoring TWAMP-Light test for the specified
session.
Rows are created or destroyed by SNMP Set operations on
tmnxOam…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgTwampLtRowStatus specifies the status of the
configuration row for the specified session's TWAMP-Light test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFami… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtAdminStatus specifies whether or not
the specified session's TWAMP-Light test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', set… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtOnDmndStatus specifies the status of
the on-demand TWAMP-Light test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand T… |
TIMETRA-TC-MIBTmnxEnabledDisabledOrNAr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtTestId specifies the test identifier
for the specified session's TWAMP-Light test. When a TWAMP-Light test is created, tmnxOamPmCfgTwampLtRowStatus and tmnxOamPmCfgTwampLtT… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtInterval specifies the elapsed time
between transmission of TWAMP-Test PDUs for the specified session's TWAMP-Light test. |
millisecondsUnsigned32r/w Constraints: range: 100-100range: 1000-1000range: 10000-10000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtPadSize specifies the amount of
padding to be added to each launched TWAMP-Test PDU for the specified session's TWAMP-Light test. |
octetsUnsigned32r/w Constraints: range: 0-2000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtTestDuration specifies the test
duration for the specified session's TWAMP-Light test. Zero specifies a test which runs until it is manually stopped. An atte… |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtRunTimeLeft indicates the run time
remaining for the specified session's TWAMP-Light test. For example, suppose a TWAMP-Light test has the following configuration: … |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtCollectStats specifies the type(s) of
statistics to collect while the TWAMP-Light test is running. Code points: collectDelayStats(1) - collect TWAMP-Light delay statisti… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.9 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtTxFrmsPerDelT specifies the number of
TWAMP-Light frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') when computing loss statistics for the specified session's T… |
framesUnsigned32r/w Constraints: range: 1-50 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.10 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtConsecDeltaTs specifies the number of
consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' when computing loss statistics f… |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.11 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtChliThreshold specifies the MEF-35
Consecutive High Loss Interval (CHLI) threshold for the specified session's TWAMP-Light test. The loss parameters used by SROS for TWAMP-… |
Unsigned32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.12 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtFlrThreshold specifies the MEF-35
Frame Loss Ratio (FLR) threshold for the specified session's TWAMP-Light test. The FLR threshold is used to decide if a MEF-35 Small Time … |
percentUnsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.13 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtHliForceCount specifies whether or not
to count High Loss Intervals (HLIs) and Consecutive High Loss Intervals (CHLIs) when the TWAMP-Light test's MEF-35 Availability state is Unavailable… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.14 |
||||||||||||
|
The value of tmnxOamPmCfgTwampLtStrTmplName specifies the name of the
OAM-PM streaming template used by the specified TWAMP-Light test. Streaming functionality is described in the DESCRIPTION clause of tm… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.15 |
tmnxOamPmCfgTwlRflTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.10
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgTwlRflTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwlRflTable'
tmnxOamPmCfgTwlRflTable contains the configuration information for OAM
Performance Monitoring TWAMP-Light (Two-Way Active Measurement
Protocol, Light) reflectors.
A TWAMP-Light reflector responds to TWAMP-Test frames.
tmnxOamPmCfgTwlRflEntry contains the configuration information for the
OAM Performance Monitoring TWAMP-Light reflector for the virtual
router specified by the given service identifier.
Service identifier z…
OAM Performance Monitoring TWAMP-Light reflector for the virtual
router specified by the given service identifier.
Service identifier z…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgTwlRflRowStatus specifies the status of the
configuration row for the TWAMP-Light reflector for the virtual router specified by the given service identifier. When a reflector is c… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgTwlRflAdminStatus specifies whether or not
the specified TWAMP-Light reflector is administratively enabled. tmnxOamPmCfgTwlRflListenUdpPort cannot be changed while tmnxOamPmCfgTwl… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgTwlRflDescription specifies the descriptive
text for the specified TWAMP-Light reflector. |
TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgTwlRflListenUdpPort specifies the UDP port on
which the specified TWAMP-Light reflector listens for TWAMP PDUs. When a reflector is created, tmnxOamPmCfgTwlRflRowStatus and tmnxOa… |
Unsigned32r/w Constraints: range: 862-862range: 1024-65535 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.10.1.4 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11
·
1 row entry
·
5 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgTwlRflPfxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwlRflPfxTable'
tmnxOamPmCfgTwlRflPfxTable contains the configuration information for
OAM Performance Monitoring TWAMP-Light (Two-Way Active Measurement
Protocol, Light) reflector prefixes.
The set of prefixes configured for a TWAMP-Light reflector defines a
set of valid source addresses for the reflector. When the reflector is
validating an incoming TWAMP-Test PDU, the PDU is rejected (and
counted) if its source address is invalid.
tmnxOamPmCfgTwlRflPfxEntry contains the configuration information for
the OAM Performance Monitoring TWAMP-Light reflector prefix specified
by the indices.
Rows are created or destroyed by SNMP Set operatio…
the OAM Performance Monitoring TWAMP-Light reflector prefix specified
by the indices.
Rows are created or destroyed by SNMP Set operatio…
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgTwlRflPfxPrefixType specifies the prefix type
of tmnxOamPmCfgTwlRflPfxPrefix. |
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.1 |
||||||||||||||
|
The value of tmnxOamPmCfgTwlRflPfxPrefix (in combination with
tmnxOamPmCfgTwlRflPfxPrefixType and tmnxOamPmCfgTwlRflPfxPrefixLen) specifies a valid source prefix for the TWAMP-Light reflector specified by the given serv… |
OctetString Constraints: range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.2 |
||||||||||||||
|
The value of tmnxOamPmCfgTwlRflPfxPrefixLen (in combination with
tmnxOamPmCfgTwlRflPfxPrefixType and tmnxOamPmCfgTwlRflPfxPrefix) specifies a valid source prefix for the TWAMP-Light reflector specified by the given serv… |
bitsUnsigned32 Constraints: range: 0-128 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.3 |
||||||||||||||
|
The value of tmnxOamPmCfgTwlRflPfxRowStatus specifies the status of
the configuration row for the specified TWAMP-Light reflector prefix. An attempt to create a row will be rejected if there is no row wit… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.4 |
||||||||||||||
|
The value of tmnxOamPmCfgTwlRflPfxDescription specifies the
descriptive text for the specified TWAMP-Light reflector prefix. |
TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.11.1.5 |
tmnxOamPmCfgLossLmmTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.12
·
1 row entry
·
14 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgLossLmmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmTable'
tmnxOamPmCfgLossLmmTable contains the configuration information for OAM Performance Monitoring Loss Measurement Message (LMM) tests.
tmnxOamPmCfgLossLmmEntry contains the configuration information for
one OAM Performance Monitoring Loss Measurement Message (LMM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgLo…
one OAM Performance Monitoring Loss Measurement Message (LMM) test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgLo…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgLossLmmRowStatus specifies the status of the
configuration row for the specified session's LMM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily other… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmAdminStatus specifies whether or not
the specified session's LMM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setting tmn… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmOnDmndStatus specifies the status of
the on-demand LMM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand LMM test.… |
TIMETRA-TC-MIBTmnxEnabledDisabledOrNAr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmTestId specifies the test identifier
for the specified session's LMM test. When an LMM test is created, tmnxOamPmCfgLossLmmRowStatus and tmnxOamPmCfgLossLmmTestId must be s… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmInterval specifies the elapsed time
between transmission of Y.1731 LMM PDUs for the specified session's LMM test. |
millisecondsUnsigned32r/w Constraints: range: 100-100range: 1000-1000range: 10000-10000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmTestDuration specifies the test
duration for the specified session's LMM test. Zero specifies a test which runs until it is manually stopped. An attempt to s… |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmRunTimeLeft indicates the run time
remaining for the specified session's LMM test. For example, suppose an LMM test has the following configuration: tmnxOamP… |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmTxFrmsPerDelT specifies the number of
LMM frames to send in one MEF-35 'delta_t' (also known as 'Small Time Interval') when computing availability statistics for the specified session's L… |
framesUnsigned32r/w Constraints: range: 1-50 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmConsecDeltaTs specifies the number of
consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals') which constitute a MEF-35 'Availability Window' when computing availability stat… |
Unsigned32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.9 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmChliThreshold specifies the MEF-35
Consecutive High Loss Interval (CHLI) threshold for the specified session's LMM test. The availability parameters used by SROS for LMM te… |
Unsigned32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.10 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmFlrThreshold specifies the MEF-35
Frame Loss Ratio (FLR) threshold for the specified session's LMM test. The FLR threshold is used to decide if a MEF-35 'delta_t' (also kno… |
percentUnsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.11 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmAvAdminStatus specifies whether or not
collection of availability statistics is enabled for the specified session's LMM test. When the value of tmnxOamPmCfgLossLmmAvAdminSt… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.12 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmHliForceCount specifies whether or not
to count High Loss Intervals (HLIs) and Consecutive High Loss Intervals (CHLIs) when the LMM test's MEF-35 Availability state is Unavailable. … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.13 |
||||||||||||
|
The value of tmnxOamPmCfgLossLmmCollFcAdminSt specifies the
administrative state of the collection of Forwarding Class (FC) statistics for the specified LMM test. Successful collection of FC statistics ca… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.14 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.13
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgThrLossFwBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossFwBwTable'
tmnxOamPmCfgThrLossFwBwTable contains configured thresholds for OAM Performance Monitoring loss TCAs. The subset of the loss thresholds that are only configurable in the forward and backward directions is configured using this table.
tmnxOamPmCfgThrLossFwBwEntry contains the configured thresholds for the
forward or backward direction of one OAM-PM loss test. For example, a
row may contain the configurable thresholds for the forward direction
for th…
forward or backward direction of one OAM-PM loss test. For example, a
row may contain the configurable thresholds for the forward direction
for th…
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgTestType specifies the test type index of the
row. The test types supporting loss thresholds are 'slm(2)', 'twampLight(3)', and 'lmm(4)'. |
TmnxOamPmTestType Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.1 |
||||||||||
|
The value of tmnxOamPmCfgForwardBackward specifies the direction index
of the row. |
TmnxOamPmForwardBackward Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.2 |
||||||||||
|
The value of tmnxOamPmCfgThrLossAvgFlrRaise specifies the raise
threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrRaise is the raise threshold … |
milli-percentInteger32r/w Constraints: range: -1--1range: 1-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.3 |
||||||||||
|
The value of tmnxOamPmCfgThrLossAvgFlrClear specifies the clear
threshold for the average Frame Loss Ratio (FLR). Depending on the specified indices, tmnxOamPmCfgThrLossAvgFlrClear is the clear threshold … |
milli-percentInteger32r/w Constraints: range: -1-99999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.13.1.4 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14
·
1 row entry
·
11 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgThrLossFwBwAgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossFwBwAgTable'
tmnxOamPmCfgThrLossFwBwAgTable contains configured thresholds for OAM Performance Monitoring loss TCAs. The subset of the loss thresholds that are configurable in the forward, backward, and aggregate directions is configured using this table. An aggregate loss threshold applies to the sum of a forward loss counter and a backward loss counter.
tmnxOamPmCfgThrLossFwBwAgEntry contains the configured thresholds for
the forward, backward, or aggregate direction of one OAM-PM loss test.
For example, a row may contain the configurable thresholds for the
forward dir…
the forward, backward, or aggregate direction of one OAM-PM loss test.
For example, a row may contain the configurable thresholds for the
forward dir…
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgForwardBackwardAggr specifies the direction
index of the row. |
TmnxOamPmForwardBackwardAggr Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.1 |
||||||
|
The value of tmnxOamPmCfgThrLossChliRaise specifies the raise
threshold for Consecutive High Loss Intervals (CHLIs). Depending on the specified indices, tmnxOamPmCfgThrLossChliRaise is the raise threshold… |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.2 |
||||||
|
The value of tmnxOamPmCfgThrLossChliClear specifies the clear
threshold for Consecutive High Loss Intervals (CHLIs). tmnxOamPmCfgThrLossChliClear is the clear threshold for the list of counters specified … |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.3 |
||||||
|
The value of tmnxOamPmCfgThrLossHliRaise specifies the raise threshold
for High Loss Intervals (HLIs). tmnxOamPmCfgThrLossHliRaise has the same operating principles as tmnxOamPmCfgThrLossChliRaise. … |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4 |
||||||
|
The value of tmnxOamPmCfgThrLossHliClear specifies the clear threshold
for High Loss Intervals (HLIs). tmnxOamPmCfgThrLossHliClear has the same operating principles as tmnxOamPmCfgThrLossChliClear. … |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.5 |
||||||
|
The value of tmnxOamPmCfgThrLossUnavlIndRaise specifies the raise
threshold for the number of availability indicators evaluated as Unavailable. tmnxOamPmCfgThrLossUnavlIndRaise has the same operating prin… |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.6 |
||||||
|
The value of tmnxOamPmCfgThrLossUnavlIndClear specifies the clear
threshold for the number of availability indicators evaluated as Unavailable. tmnxOamPmCfgThrLossUnavlIndClear has the same operating prin… |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.7 |
||||||
|
The value of tmnxOamPmCfgThrLossUndtAvlRaise specifies the raise
threshold for the number of availability indicators evaluated as Available based on extrapolation from the previous state. tmnxOamPmCfgThrL… |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.8 |
||||||
|
The value of tmnxOamPmCfgThrLossUndtAvlClear specifies the clear
threshold for the number of availability indicators evaluated as Available based on extrapolation from the previous state. tmnxOamPmCfgThrL… |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.9 |
||||||
|
The value of tmnxOamPmCfgThrLossUndtUnavlRais specifies the raise
threshold for the number of availability indicators evaluated as Unavailable based on extrapolation from the previous state. tmnxOamPmCfgT… |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.10 |
||||||
|
The value of tmnxOamPmCfgThrLossUndtUnavlClr specifies the clear
threshold for the number of availability indicators evaluated as Unavailable based on extrapolation from the previous state. tmnxOamPmCfgTh… |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.11 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15
·
1 row entry
·
5 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgThrDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrDelayTable'
tmnxOamPmCfgThrDelayTable contains threshold configuration for OAM Performance Monitoring delay TCAs.
tmnxOamPmCfgThrDelayEntry contains the threshold configuration for one
OAM-PM bin group, bin type, and direction.
For example, a row may contain the threshold configuration for bin
group 255, bin type 'ifdv…
OAM-PM bin group, bin type, and direction.
For example, a row may contain the threshold configuration for bin
group 255, bin type 'ifdv…
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgForwardBackward2Way specifies the direction
of the row to be configured or read. |
TmnxOamPmForwardBackwardTwoWay Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.1 |
||||||
|
The value of tmnxOamPmCfgThrDelayLowestBin specifies the lowest OAM-PM
delay bin to be used when applying a configured Raise or Clear delay threshold. The usage is described in the tmnxOamPmCfgThrDelayRai… |
Unsigned32r/w Constraints: range: 0-9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.2 |
||||||
|
The value of tmnxOamPmCfgThrDelayRaise specifies the OAM-PM raise
threshold for excessive delay. For example, suppose: 1. tmnxOamPmCfgThrDelayRaise=1000 and tmnxOamPmCfgThrDelayLowestBin=7 for the index … |
Integer32r/w Constraints: range: -1--1range: 1-864000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.3 |
||||||
|
The value of tmnxOamPmCfgThrDelayClear specifies the OAM-PM clear
threshold for excessive delay. For example, suppose: 1. tmnxOamPmCfgThrDelayClear=900 and tmnxOamPmCfgThrDelayLowestBin=7 for the index v… |
Integer32r/w Constraints: range: -1-863999 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.4 |
||||||
|
The value of tmnxOamPmCfgThrDelayExclBinFrTca specifies the bin number
of the lowest delay bin to be excluded from the OAM-PM TCA calculations for the specified bin group, bin type, and direction. Configu… |
TmnxOamPmCfgBinNumOrNoner/w Type Constraints: range: -1range: 1..9 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.15.1.5 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.16
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgBinGrpTypeDirTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgBinGrpTypeDirTable'
tmnxOamPmCfgBinGrpTypeDirTable contains configuration information for the delay bins to be excluded from OAM Performance Monitoring average delay calculations.
tmnxOamPmCfgBinGrpTypeDirEntry contains the delay bins to be excluded
from OAM-PM average delay calculations for one OAM-PM bin group, bin
type, and direction.
from OAM-PM average delay calculations for one OAM-PM bin group, bin
type, and direction.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgBgTyDirExclBinsFrAvg specifies the set of
delay bins to be excluded from OAM-PM average delay calculations for the specified bin group, bin type, and direction. Configuring a set … |
TmxnOamPmBinNumsr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.16.1.1 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.17
·
1 row entry
·
6 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessMplsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessMplsTable'
tmnxOamPmCfgSessMplsTable contains the MPLS configuration for the MPLS tests belonging to OAM Performance Monitoring sessions.
tmnxOamPmCfgSessMplsEntry contains the MPLS configuration for the MPLS
tests belonging to one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOamPmC…
tests belonging to one OAM Performance Monitoring session.
A row is created when a tmnxOamPmCfgSessTable row is created with
tmnxOamPmC…
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgSessMplsForwardClass specifies the forwarding
class name to be used when launching an MPLS Delay Measurement (DM) query for each test belonging to the specified session. The forwarding class na… |
TIMETRA-TC-MIBTFCNamer/w | .1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.1 |
||||||||
|
The value of tmnxOamPmCfgSessMplsProfile specifies the Quality of
Service profile to be used when launching an MPLS Delay Measurement (DM) query for each test belonging to the specified session. |
TIMETRA-TC-MIBTProfiler/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.2 |
||||||||
|
The value of tmnxOamPmCfgSessMplsTtl specifies the value to be copied
into the Time To Live field of the MPLS header when launching an MPLS Delay Measurement (DM) query for each test belonging to the specified session. |
Unsigned32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.3 |
||||||||
|
The value of tmnxOamPmCfgSessMplsDscpName specifies the Differentiated
Services Code Point (DSCP) to be copied into the Differentiated Services (DS) field of the MPLS DM PDU of each query launched for each test belongin… |
TIMETRA-TC-MIBTDSCPNamer/w | .1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.4 |
||||||||
|
The value of tmnxOamPmCfgSessMplsPadPattern specifies a two octet
pattern to be repeated to fill the Value field of the Padding TLV(s) of the MPLS DM PDU of each query launched for each test belonging to the specified s… |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.5 |
||||||||
|
The value of tmnxOamPmCfgSessMplsLspType specifies the type of the LSP
to be tested by OAM-PM. tmnxOamPmCfgSessMplsLspType can be changed: 1. From 'none(1)' to another value, or 2. From another value to… |
TmnxOamPmMplsLspTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.17.1.6 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.18
·
1 row entry
·
3 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessMplsRsvpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessMplsRsvpTable'
tmnxOamPmCfgSessMplsRsvpTable contains configuration information for manually created RSVP LSPs to be tested by OAM-PM.
tmnxOamPmCfgSessMplsRsvpEntry contains configuration information for
one manually created RSVP LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to 'rsvp(3)'.
…
one manually created RSVP LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to 'rsvp(3)'.
…
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgSessMplsRsvpLspName specifies the name of the
RSVP LSP to be tested by OAM-PM. For a successful test, the LSP name must match a TIMETRA-MPLS-MIB::vRtrMplsLspName, with TIMETRA-MPL… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.18.1.1 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRsvpRetAddrT specifies the address
type of tmnxOamPmCfgSessMplsRsvpRetAddr. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.18.1.2 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRsvpRetAddr specifies the destination
IP address to be used by an OAM-PM MPLS test when sending a UDP response from the tail end of a uni-directional LSP back to this system. … |
OctetStringr/w Constraints: range: 0-0range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.18.1.3 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19
·
1 row entry
·
7 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessMplsRsvpAutTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessMplsRsvpAutTable'
tmnxOamPmCfgSessMplsRsvpAutTable contains configuration information for automatically created RSVP LSPs to be tested by OAM-PM.
tmnxOamPmCfgSessMplsRsvpAutEntry contains configuration information
for one automatically created RSVP LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to
'rsvpAuto(4)'.
…
for one automatically created RSVP LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to
'rsvpAuto(4)'.
…
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgSessMplsRaTemplName specifies the name of the
LSP Template used to identify the LSP to be tested by OAM-PM. The LSP to be tested is fully identified by tmnxOamPmCfgSessMplsRaT… |
TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.1 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaFrAddrType specifies the address
type of tmnxOamPmCfgSessMplsRaFrAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.2 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaFrAddress specifies the IP address
of the ingress router used to identify the LSP to be tested by OAM-PM. The LSP to be tested is fully identified by tmnxOamPmCfgSes… |
OctetStringr/w Constraints: range: 0-0range: 4-4 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.3 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaToAddrType specifies the address
type of tmnxOamPmCfgSessMplsRaToAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.4 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaToAddress specifies the IP address
of the egress router used to identify the LSP to be tested by OAM-PM. The LSP to be tested is fully identified by tmnxOamPmCfgSess… |
OctetStringr/w Constraints: range: 0-0range: 4-4 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.5 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaRetAddrTyp specifies the address
type of tmnxOamPmCfgSessMplsRaRetAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.6 |
||||||||||||||
|
The value of tmnxOamPmCfgSessMplsRaRetAddress specifies the
destination IP address to be used by an OAM-PM MPLS test when sending a UDP response from the tail end of a uni-directional LSP back to this system. … |
OctetStringr/w Constraints: range: 0-0range: 4-4range: 16-16 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.19.1.7 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.20
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgSessMplsTpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessMplsTpTable'
tmnxOamPmCfgSessMplsTpTable contains configuration information for MPLS Transport Profile (MPLS-TP) LSPs to be tested by OAM-PM.
tmnxOamPmCfgSessMplsTpEntry contains configuration information for one
MPLS Transport Profile (MPLS-TP) LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to
'mplsTpStatic(…
MPLS Transport Profile (MPLS-TP) LSP to be tested by OAM-PM.
A row is created when tmnxOamPmCfgSessMplsLspType is set to
'mplsTpStatic(…
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmCfgSessMplsTpLspName specifies the name of the
MPLS-TP LSP to be tested by OAM-PM. For a successful test, the LSP name must match a TIMETRA-MPLS-MIB::vRtrMplsLspName, with TIMETRA-MP… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.20.1.1 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21
·
1 row entry
·
10 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgDelayMplsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayMplsTable'
tmnxOamPmCfgDelayMplsTable contains the configuration information for OAM-PM MPLS Delay Measurement (DM) tests.
tmnxOamPmCfgDelayMplsEntry contains the configuration information for
one OAM-PM MPLS DM test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgDelayMplsRowStatus.
An attempt…
one OAM-PM MPLS DM test.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgDelayMplsRowStatus.
An attempt…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgDelayMplsRowStatus specifies the status of
the configuration row for the specified session's MPLS DM test. An attempt to create a row for a session with tmnxOamPmCfgSessTestFamily… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsAdminStatus specifies whether or not
the specified session's MPLS DM test is administratively enabled. If the session type (tmnxOamPmCfgSessType) is 'proactive(1)', setti… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsOnDmdStatus specifies the status of
the on-demand MPLS DM test for the specified session. Values: 'enabled(1)' Set by an SNMP manager to start an on-demand MPLS… |
TIMETRA-TC-MIBTmnxEnabledDisabledOrNAr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsTestId specifies the test identifier
for the specified session's MPLS DM test. When a MPLS DM test is created, tmnxOamPmCfgDelayMplsRowStatus and tmnxOamPmCfgDelayMplsTes… |
Unsigned32r/w Constraints: range: 0-67108863 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsInterval specifies the elapsed time
between transmission of MPLS DM queries for the specified session's MPLS DM test. |
millisecondsUnsigned32r/w Constraints: range: 1000-1000range: 2000-2000range: 3000-3000range: 4000-4000range: 5000-5000range: 6000-6000range: 7000-7000range: 8000-8000range: 9000-9000range: 10000-10000 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsPadTlvSize specifies the amount of
padding to be added to each launched MPLS DM query for the specified session's MPLS DM test. Zero specifies that a Pad TLV should not b… |
octetsUnsigned32r/w Constraints: range: 0-0range: 2-257 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.6 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsReflectPad specifies whether or not
to copy the Padding TLV from an MPLS DM query to the response. Within the MPLS DM protocol, this value controls whether the Type field… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.7 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsTstDuration specifies the test
duration for the specified session's MPLS DM test. Zero specifies a test which runs until it is manually stopped. An attempt… |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.8 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsRunTimeLeft indicates the run time
remaining for the specified session's MPLS DM test. For example, suppose a MPLS DM test has the following configuration: … |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.9 |
||||||||||||
|
The value of tmnxOamPmCfgDelayMplsStrTmplName specifies the name of
the OAM-PM streaming template used by the specified MPLS-DM test. Streaming functionality is described in the DESCRIPTION clause of tmnx… |
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.21.1.10 |
tmnxOamPmCfgStrTmplTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.22
·
1 row entry
·
6 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgStrTmplTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgStrTmplTable'
tmnxOamPmCfgStrTmplTable contains the configuration information for
OAM-PM streaming templates.
A streaming template is used to send telemetry reports to a network
management station. A telemetry report can contain (for example) the
average round-trip Frame Delay (FD) computed using a DMM test across a
10 second interval.
A streaming template defined using this table can be referenced by an
OAM-PM test (e.g. a DMM test).
tmnxOamPmCfgStrTmplEntry contains the configuration information for
one OAM-PM streaming template.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgStrTmplRowStatus.
one OAM-PM streaming template.
Rows are created or destroyed by SNMP Set operations on
tmnxOamPmCfgStrTmplRowStatus.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgStrTmplName specifies the name of the
streaming template to be configured or read. |
TIMETRA-TC-MIBTLNamedItem Type Constraints: range: 1..64 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgStrTmplRowStatus specifies the status of the
configuration row for the specified streaming template. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgStrTmplDescription specifies the descriptive
text for the specified streaming template. |
TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.3 |
||||||||||||
|
The value of tmnxOamPmCfgStrTmplAdminStatus specifies whether or not
the specified streaming template is administratively enabled. When a streaming template is disabled, a test which refers to the templat… |
TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.4 |
||||||||||||
|
The value of tmnxOamPmCfgStrTmplSampleWindow specifies the duration of
the sampling window for the specified streaming template. When a sampling window closes, a telemetry report is sent. |
secondsUnsigned32r/w Constraints: range: 10-60 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.5 |
||||||||||||
|
The value of tmnxOamPmCfgStrTmplWindowInteg specifies the percentage
of valid measurements in the sampling window needed to declare the window valid (i.e. not suspect). A sampling window is reported as su… |
percentUnsigned32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.22.1.6 |
tmnxOamPmCfgStrMeasTable
table.1.3.6.1.4.1.6527.3.1.2.92.1.3.23
·
1 row entry
·
3 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmCfgStrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmCfgStrMeasTable'
tmnxOamPmCfgStrMeasTable contains the configuration of the
measurements to be collected for OAM-PM streaming templates.
Streaming functionality is described in the DESCRIPTION clause of
tmnxOamPmCfgStrTmplTable.
tmnxOamPmCfgStrMeasEntry contains the configuration of one measurement
to be collected for one OAM-PM streaming template.
For example, suppose the table contains the following rows (where
INDEX columns are …
to be collected for one OAM-PM streaming template.
For example, suppose the table contains the following rows (where
INDEX columns are …
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmCfgStrMetric specifies the metric to be
collected (e.g. average Frame Delay, 'fdAvg(1)'). |
TmnxOamPmStrMetric Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.23.1.1 |
||||||||||||
|
The value of tmnxOamPmCfgStrDir specifies the direction to be measured
(e.g. 'forward(1)'). |
TmnxOamPmForwardBackwardTwoWay Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.1.3.23.1.2 |
||||||||||||
|
The value of tmnxOamPmCfgStrMeasRowStatus specifies the status of the
configuration row for the specified streaming measurement. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.92.1.3.23.1.3 |
tmnxOamPmStsBaseTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.1
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsBaseTable'
tmnxOamPmStsBaseTable contains the base statistics for OAM Performance Monitoring Measurement Interval Data Sets. The statistics in this table are common to all test types (e.g. DMM and SLM tests).
tmnxOamPmStsBaseEntry contains the base statistics for one OAM
Performance Monitoring Measurement Interval Data Set.
Rows are created in this table when a test is started (e.g. using
tmnxOamPmCfgDelayDmmAdm…
Performance Monitoring Measurement Interval Data Set.
Rows are created in this table when a test is started (e.g. using
tmnxOamPmCfgDelayDmmAdm…
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsBaseTestType specifies the type of test for
which statistics are to be read (e.g. 'dmm(1)'). |
TmnxOamPmTestType Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.1 |
||||||||||
|
The value of tmnxOamPmStsMeasIntvlDuration specifies the duration of
the interval of the statistics to be read (e.g. 'mi15Minutes(2)'). |
TmnxOamPmMeasIntervalDuration Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.2 |
||||||||||
|
The value of tmnxOamPmStsIntvlNum specifies the interval number of the
statistics to be read. The system's creation and destruction of interval numbers is described in the tmnxOamPmStsBaseEntry DESCRIPTIO… |
TmnxOamPmStsIntvlNum Type Constraints: range: 1..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.3 |
||||||||||
|
The value of tmnxOamPmStsBaseOperStatus indicates the operational
status of the specified measurement interval data set. If the interval is historical and the operational status is 'inProgress(1)', the in… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.4 |
||||||||||
|
The value of tmnxOamPmStsBaseSuspect indicates whether or not the
specified measurement interval data set contains suspect information. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.5 |
||||||||||
|
The value of tmnxOamPmStsBaseStartTime indicates the start time (in
UTC) of the specified measurement interval data set. |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.6 |
||||||||||
|
The value of tmnxOamPmStsBaseElapsedTime indicates the time elapsed
since data collection started for the specified measurement interval data set. |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.7 |
||||||||||
|
The value of tmnxOamPmStsBaseTestFramesTx indicates the number of test
frames sent for the specified measurement interval data set. |
framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.8 |
||||||||||
|
The value of tmnxOamPmStsBaseTestFramesRx indicates the number of test
frames received for the specified measurement interval data set. |
framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.2
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsMeasIntvlIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsMeasIntvlIndexTable'
tmnxOamPmStsMeasIntvlIndexTable contains the interval number of the newest interval for all the active combinations of session, test type (e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)').
tmnxOamPmStsMeasIntvlIndexEntry contains the interval number of the
newest interval for the specified combination of session, test type
(e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)').
Rows a…
newest interval for the specified combination of session, test type
(e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)').
Rows a…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsMeasIntvlIndexNewest indicates the interval
number of the newest interval for the specified session, test type (e.g. 'dmm(1)'), and interval duration (e.g. 'mi15Minutes(2)'). This value is prov… |
TmnxOamPmStsIntvlNum Type Constraints: range: 1..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.2.1.1 |
tmnxOamPmStsLossSlmTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.3
·
1 row entry
·
22 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsLossSlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsLossSlmTable'
tmnxOamPmStsLossSlmTable contains the frame loss statistics for OAM Performance Monitoring SLM (Synthetic Loss Measurement) tests.
tmnxOamPmStsLossSlmEntry contains the SLM test statistics for one OAM
Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
created with tm…
Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
created with tm…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsLossSlmTxFwd indicates the number of SLM
request frames transmitted in the forward direction for the specified measurement interval data set. A frame is counted if the SLM Availab… |
SLM framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.1 |
|
The value of tmnxOamPmStsLossSlmRxFwd indicates the number of SLM
request frames received in the forward direction for the specified measurement interval data set. A frame is counted if the SLM Availabili… |
SLM framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.2 |
|
The value of tmnxOamPmStsLossSlmTxBwd indicates the number of SLR
reply frames transmitted in the backward direction for the specified measurement interval data set. A frame is counted if the SLM Availabi… |
SLR framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.3 |
|
The value of tmnxOamPmStsLossSlmRxBwd indicates the number of SLR
reply frames received in the backward direction for the specified measurement interval data set. A frame is counted if the SLM Availabilit… |
SLR framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.4 |
|
The value of tmnxOamPmStsLossSlmAvailIndFwd indicates the number of
availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.5 |
|
The value of tmnxOamPmStsLossSlmAvailIndBwd indicates the number of
availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.6 |
|
The value of tmnxOamPmStsLossSlmUnavlIndFwd indicates the number of
availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.7 |
|
The value of tmnxOamPmStsLossSlmUnavlIndBwd indicates the number of
availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.8 |
|
The value of tmnxOamPmStsLossSlmUndtAvlFwd indicates the number of
availability indicators evaluated as Available in the forward direction based on extrapolation from the previous state. For example, this… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.9 |
|
The value of tmnxOamPmStsLossSlmUndtUnavlFwd indicates the number of
availability indicators evaluated as Unavailable in the forward direction based on extrapolation from the previous state. For example, … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.10 |
|
The value of tmnxOamPmStsLossSlmUndtAvlBwd indicates the number of
availability indicators evaluated as Available in the backward direction based on extrapolation from the previous state. For example, thi… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.11 |
|
The value of tmnxOamPmStsLossSlmUndtUnavlBwd indicates the number of
availability indicators evaluated as Unavailable in the backward direction based on extrapolation from the previous state. For example,… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.12 |
|
The value of tmnxOamPmStsLossSlmHliFwd indicates the number of High
Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.13 |
|
The value of tmnxOamPmStsLossSlmHliBwd indicates the number of High
Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.14 |
|
The value of tmnxOamPmStsLossSlmChliFwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.15 |
|
The value of tmnxOamPmStsLossSlmChliBwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.16 |
|
The value of tmnxOamPmStsLossSlmMinFlrFwd indicates the minimum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.17 |
|
The value of tmnxOamPmStsLossSlmMaxFlrFwd indicates the maximum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.18 |
|
The value of tmnxOamPmStsLossSlmAvgFlrFwd indicates the average Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.19 |
|
The value of tmnxOamPmStsLossSlmMinFlrBwd indicates the minimum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.20 |
|
The value of tmnxOamPmStsLossSlmMaxFlrBwd indicates the maximum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.21 |
|
The value of tmnxOamPmStsLossSlmAvgFlrBwd indicates the average Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.3.1.22 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayDmmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayDmmTable'
tmnxOamPmStsDelayDmmTable contains the summarized DMM (Delay Measurement Message) statistics for OAM Performance Monitoring Measurement Interval Data Sets.
tmnxOamPmStsDelayDmmEntry contains the summarized DMM (Delay
Measurement Message) statistics for one OAM Performance Monitoring
Measurement Interval Data Set.
When a row is created in tmnxOamPmStsBaseTable …
Measurement Message) statistics for one OAM Performance Monitoring
Measurement Interval Data Set.
When a row is created in tmnxOamPmStsBaseTable …
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayDmmFwdMin indicates the minimum delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.1 |
|
The value of tmnxOamPmStsDelayDmmFwdMax indicates the maximum delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.2 |
|
The value of tmnxOamPmStsDelayDmmFwdAvg indicates the average delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.3 |
|
The value of tmnxOamPmStsDelayDmmBwdMin indicates the minimum delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.4 |
|
The value of tmnxOamPmStsDelayDmmBwdMax indicates the maximum delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.5 |
|
The value of tmnxOamPmStsDelayDmmBwdAvg indicates the average delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.6 |
|
The value of tmnxOamPmStsDelayDmm2wyMin indicates the minimum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.7 |
|
The value of tmnxOamPmStsDelayDmm2wyMax indicates the maximum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.8 |
|
The value of tmnxOamPmStsDelayDmm2wyAvg indicates the average two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.4.1.9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.5
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayDmmBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayDmmBinTable'
tmnxOamPmStsDelayDmmBinTable contains the per-bin DMM (Delay Measurement Message) statistics for OAM Performance Monitoring Measurement Interval Data Sets.
tmnxOamPmStsDelayDmmBinEntry contains the per-bin DMM (Delay
Measurement Message) statistics for one OAM Performance Monitoring
Measurement Interval Data Set.
Rows are created in this table when a correspon…
Measurement Message) statistics for one OAM Performance Monitoring
Measurement Interval Data Set.
Rows are created in this table when a correspon…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayDmmBinNum specifies the bin number of
the statistics to be read. |
Unsigned32 Constraints: range: 0-9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.1 |
|
The value of tmnxOamPmStsDelayDmmBinFwdCount indicates the number of
measurements in the forward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppos… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.2 |
|
The value of tmnxOamPmStsDelayDmmBinBwdCount indicates the number of
measurements in the backward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppo… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.3 |
|
The value of tmnxOamPmStsDelayDmmBin2wyCount indicates the number of
two-way measurements that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index value… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.5.1.4 |
tmnxOamPmStsTwlRflTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.6
·
1 row entry
·
3 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsTwlRflTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsTwlRflTable'
tmnxOamPmStsTwlRflTable contains the statistics for OAM Performance Monitoring TWAMP-Light reflectors.
tmnxOamPmStsTwlRflEntry contains the statistics for the specified OAM
Performance Monitoring TWAMP-Light reflector.
SROS creates a row in this table when a corresponding row is created
in tmnxOamPmCfgTwlRfl…
Performance Monitoring TWAMP-Light reflector.
SROS creates a row in this table when a corresponding row is created
in tmnxOamPmCfgTwlRfl…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsTwlRflUpTime indicates the time elapsed since
the most recent transition of the reflector's administrative status to 'enabled(1)'. Zero is returned if the reflector's administrati… |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.1 |
|
The value of tmnxOamPmStsTwlRflFramesRx indicates the number of
TWAMP-Test frames received by the specified reflector. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.2 |
|
The value of tmnxOamPmStsTwlRflFramesTx indicates the number of
TWAMP-Test frames transmitted by the specified reflector. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.6.1.3 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayTwlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayTwlTable'
tmnxOamPmStsDelayTwlTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame delay summary statistics. The frame delay summary statistics kept for TWAMP-Light tests are the same as the frame delay summary statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66.
tmnxOamPmStsDelayTwlEntry contains the TWAMP-Light frame delay summary
statistics for one OAM Performance Monitoring Measurement Interval
Data Set.
When a row is created in tmnxOamPmStsBaseTable with
tmnxOa…
statistics for one OAM Performance Monitoring Measurement Interval
Data Set.
When a row is created in tmnxOamPmStsBaseTable with
tmnxOa…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayTwlFwdMin indicates the minimum delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.1 |
|
The value of tmnxOamPmStsDelayTwlFwdMax indicates the maximum delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.2 |
|
The value of tmnxOamPmStsDelayTwlFwdAvg indicates the average delay in
the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.3 |
|
The value of tmnxOamPmStsDelayTwlBwdMin indicates the minimum delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.4 |
|
The value of tmnxOamPmStsDelayTwlBwdMax indicates the maximum delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.5 |
|
The value of tmnxOamPmStsDelayTwlBwdAvg indicates the average delay in
the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.6 |
|
The value of tmnxOamPmStsDelayTwl2wyMin indicates the minimum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.7 |
|
The value of tmnxOamPmStsDelayTwl2wyMax indicates the maximum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.8 |
|
The value of tmnxOamPmStsDelayTwl2wyAvg indicates the average two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.7.1.9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.8
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayTwlBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayTwlBinTable'
tmnxOamPmStsDelayTwlBinTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame delay per-bin statistics. The frame delay per-bin statistics kept for TWAMP-Light tests are the same as the frame delay per-bin statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66.
tmnxOamPmStsDelayTwlBinEntry contains the TWAMP-Light frame delay
per-bin statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
Rows are created in this table when a corresponding row…
per-bin statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
Rows are created in this table when a corresponding row…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayTwlBinNum specifies the bin number of
the statistics to be read. |
Unsigned32 Constraints: range: 0-9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.1 |
|
The value of tmnxOamPmStsDelayTwlBinFwdCount indicates the number of
TWAMP-Light frame delay measurements in the forward direction that fall within the configured range (in microseconds) of the specified bin. … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.2 |
|
The value of tmnxOamPmStsDelayTwlBinBwdCount indicates the number of
TWAMP-Light frame delay measurements in the backward direction that fall within the configured range (in microseconds) of the specified bin. … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.3 |
|
The value of tmnxOamPmStsDelayTwlBin2wyCount indicates the number of
TWAMP-Light two-way frame delay measurements that fall within the configured range (in microseconds) of the specified bin. For example,… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.8.1.4 |
tmnxOamPmStsLossLmmTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.9
·
1 row entry
·
24 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsLossLmmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsLossLmmTable'
tmnxOamPmStsLossLmmTable contains the frame loss statistics for OAM Performance Monitoring LMM (Loss Measurement Message) tests.
tmnxOamPmStsLossLmmEntry contains the LMM test statistics for one OAM
Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
created with tm…
Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
created with tm…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsLossLmmTxFwd indicates the number of service
frames transmitted in the forward direction for the specified measurement interval data set. This counter is computed using the proced… |
framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.1 |
|
The value of tmnxOamPmStsLossLmmRxFwd indicates the number of service
frames received in the forward direction for the specified measurement interval data set. This counter is computed using the procedure… |
framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.2 |
|
The value of tmnxOamPmStsLossLmmTxBwd indicates the number of service
frames transmitted in the backward direction for the specified measurement interval data set. This counter is computed using the proce… |
framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.3 |
|
The value of tmnxOamPmStsLossLmmRxBwd indicates the number of service
frames received in the backward direction for the specified measurement interval data set. This counter is computed using the procedur… |
framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.4 |
|
The value of tmnxOamPmStsLossLmmMinFlrFwd indicates the minimum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.5 |
|
The value of tmnxOamPmStsLossLmmMaxFlrFwd indicates the maximum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.6 |
|
The value of tmnxOamPmStsLossLmmAvgFlrFwd indicates the average Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. This value is computed using the procedures… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.7 |
|
The value of tmnxOamPmStsLossLmmMinFlrBwd indicates the minimum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedure… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.8 |
|
The value of tmnxOamPmStsLossLmmMaxFlrBwd indicates the maximum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedure… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.9 |
|
The value of tmnxOamPmStsLossLmmAvgFlrBwd indicates the average Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. This value is computed using the procedure… |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.10 |
|
The value of tmnxOamPmStsLossLmmAvailIndFwd indicates the number of
availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.11 |
|
The value of tmnxOamPmStsLossLmmAvailIndBwd indicates the number of
availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.12 |
|
The value of tmnxOamPmStsLossLmmUnavlIndFwd indicates the number of
availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.13 |
|
The value of tmnxOamPmStsLossLmmUnavlIndBwd indicates the number of
availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.14 |
|
The value of tmnxOamPmStsLossLmmUndtAvlFwd indicates the number of
availability indicators evaluated as Undetermined Available, in the forward direction. This counter is incremented when: 1. It is time t… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.15 |
|
The value of tmnxOamPmStsLossLmmUndtUnavlFwd indicates the number of
availability indicators evaluated as Undetermined Unavailable, in the forward direction. This counter is incremented when: 1. It is ti… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.16 |
|
The value of tmnxOamPmStsLossLmmUndtAvlBwd indicates the number of
availability indicators evaluated as Undetermined Available, in the backward direction. This counter is incremented when: 1. It is time … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.17 |
|
The value of tmnxOamPmStsLossLmmUndtUnavlBwd indicates the number of
availability indicators evaluated as Undetermined Unavailable, in the backward direction. This counter is incremented when: 1. It is t… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.18 |
|
The value of tmnxOamPmStsLossLmmHliFwd indicates the number of High
Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.19 |
|
The value of tmnxOamPmStsLossLmmHliBwd indicates the number of High
Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.20 |
|
The value of tmnxOamPmStsLossLmmChliFwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.21 |
|
The value of tmnxOamPmStsLossLmmChliBwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.22 |
|
The value of tmnxOamPmStsLossLmmUndetDelTsFwd indicates the number of
undetermined MEF-35 'delta_t's (also known as 'Small Time Intervals') for the forward direction for the specified measurement interval data set. … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.23 |
|
The value of tmnxOamPmStsLossLmmUndetDelTsBwd indicates the number of
undetermined MEF-35 'delta_t's (also known as 'Small Time Intervals') for the backward direction for the specified measurement interval data set. … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.9.1.24 |
tmnxOamPmStsLossTwlTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.10
·
1 row entry
·
22 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsLossTwlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsLossTwlTable'
tmnxOamPmStsLossTwlTable contains TWAMP-Light (Two-Way Active Measurement Protocol, Light) frame loss statistics. The frame loss statistics kept for TWAMP-Light tests are the same as the frame loss statistics specified for Ethernet SLM (Synthetic Loss Measurement) tests in MEF-35 section 10.2.
tmnxOamPmStsLossTwlEntry contains the TWAMP-Light loss test statistics
for one OAM Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
cr…
for one OAM Performance Monitoring Measurement Interval Data Set.
A row is created in this table when a tmnxOamPmStsBaseTable row is
cr…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsLossTwlTxFwd indicates the number of
TWAMP-Light request frames transmitted in the forward direction for the specified measurement interval data set. A frame is counted if the TWA… |
TWAMP-Light request framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.1 |
|
The value of tmnxOamPmStsLossTwlRxFwd indicates the number of
TWAMP-Light request frames received in the forward direction for the specified measurement interval data set. A frame is counted if the TWAMP-… |
TWAMP-Light request framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.2 |
|
The value of tmnxOamPmStsLossTwlTxBwd indicates the number of
TWAMP-Light reply frames transmitted in the backward direction for the specified measurement interval data set. A frame is counted if the TWAM… |
TWAMP-Light reply framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.3 |
|
The value of tmnxOamPmStsLossTwlRxBwd indicates the number of
TWAMP-Light reply frames received in the backward direction for the specified measurement interval data set. A frame is counted if the TWAMP-L… |
TWAMP-Light reply framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.4 |
|
The value of tmnxOamPmStsLossTwlAvailIndFwd indicates the number of
availability indicators evaluated as Available in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.5 |
|
The value of tmnxOamPmStsLossTwlAvailIndBwd indicates the number of
availability indicators evaluated as Available in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.6 |
|
The value of tmnxOamPmStsLossTwlUnavlIndFwd indicates the number of
availability indicators evaluated as Unavailable in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.7 |
|
The value of tmnxOamPmStsLossTwlUnavlIndBwd indicates the number of
availability indicators evaluated as Unavailable in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.8 |
|
The value of tmnxOamPmStsLossTwlUndtAvlFwd indicates the number of
availability indicators evaluated as Available in the forward direction, based on extrapolation from the previous state. For example, thi… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.9 |
|
The value of tmnxOamPmStsLossTwlUndtUnavlFwd indicates the number of
availability indicators evaluated as Unavailable in the forward direction, based on extrapolation from the previous state. For example,… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.10 |
|
The value of tmnxOamPmStsLossTwlUndtAvlBwd indicates the number of
availability indicators evaluated as Available in the backward direction, based on extrapolation from the previous state. For example, th… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.11 |
|
The value of tmnxOamPmStsLossTwlUndtUnavlBwd indicates the number of
availability indicators evaluated as Unavailable in the backward direction, based on extrapolation from the previous state. For example… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.12 |
|
The value of tmnxOamPmStsLossTwlHliFwd indicates the number of High
Loss Intervals (HLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.13 |
|
The value of tmnxOamPmStsLossTwlHliBwd indicates the number of High
Loss Intervals (HLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.14 |
|
The value of tmnxOamPmStsLossTwlChliFwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the forward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.15 |
|
The value of tmnxOamPmStsLossTwlChliBwd indicates the number of
Consecutive High Loss Intervals (CHLIs) in the backward direction for the specified measurement interval data set. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.16 |
|
The value of tmnxOamPmStsLossTwlMinFlrFwd indicates the minimum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.17 |
|
The value of tmnxOamPmStsLossTwlMaxFlrFwd indicates the maximum Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.18 |
|
The value of tmnxOamPmStsLossTwlAvgFlrFwd indicates the average Frame
Loss Ratio (FLR) in the forward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.19 |
|
The value of tmnxOamPmStsLossTwlMinFlrBwd indicates the minimum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.20 |
|
The value of tmnxOamPmStsLossTwlMaxFlrBwd indicates the maximum Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.21 |
|
The value of tmnxOamPmStsLossTwlAvgFlrBwd indicates the average Frame
Loss Ratio (FLR) in the backward direction for the specified measurement interval data set. |
milli-percentUnsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.10.1.22 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.11
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsTcaDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsTcaDelayTable'
tmnxOamPmStsTcaDelayTable contains statistics for delay-based OAM-PM Threshold Crossing Alerts (TCAs).
tmnxOamPmStsTcaDelayEntry contains the OAM-PM delay TCA statistics for
the combination of an OAM-PM session name, test type, bin type, and
direction (e.g. {'oam_pm_sess_1', 'dmm(1)', 'ifdv(3)', 'twoWay(3)'}).
…
the combination of an OAM-PM session name, test type, bin type, and
direction (e.g. {'oam_pm_sess_1', 'dmm(1)', 'ifdv(3)', 'twoWay(3)'}).
…
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsTcaDelayLastTime indicates the UTC date and
time at the start of the measurement interval which generated the most recent delay-based Raise or Clear TCA for the specified indices. Measurement in… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.11.1.1 |
||||||
|
The value of tmnxOamPmStsTcaDelayOperState indicates the operational
state of delay-based TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.11.1.2 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12
·
1 row entry
·
10 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsTcaLossFwBwAgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsTcaLossFwBwAgTable'
tmnxOamPmStsTcaLossFwBwAgTable contains statistics for loss-based OAM-PM Threshold Crossing Alerts (TCAs). The subset of the TCA loss statistics that are kept in the forward, backward, and aggregate directions is available using this table.
tmnxOamPmStsTcaLossFwBwAgEntry contains the TCA statistics for the
forward, backward, or aggregate direction of one OAM-PM loss test. For
example, a row may contain TCA statistics for the forward direction for
the SLM …
forward, backward, or aggregate direction of one OAM-PM loss test. For
example, a row may contain TCA statistics for the forward direction for
the SLM …
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsTcaLossChliLastTime indicates the UTC date and
time at the start of the measurement interval which generated the most recent Consecutive High Loss Interval (CHLI) Raise or Clear TCA for the spec… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.1 |
||||||
|
The value of tmnxOamPmStsTcaLossChliOperState indicates the
operational state of Consecutive High Loss Interval (CHLI) TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.2 |
||||||
|
The value of tmnxOamPmStsTcaLossHliLastTime indicates the UTC date and
time at the start of the measurement interval which generated the most recent High Loss Interval (HLI) Raise or Clear TCA for the specified indices.… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.3 |
||||||
|
The value of tmnxOamPmStsTcaLossHliOperState indicates the operational
state of High Loss Interval (HLI) TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.4 |
||||||
|
The value of tmnxOamPmStsTcaLossUnavlIndLTime indicates the UTC date
and time at the start of the measurement interval which generated the most recent Unavailability Indicator Raise or Clear TCA for the specified indice… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.5 |
||||||
|
The value of tmnxOamPmStsTcaLossUnavlIndOprSt indicates the
operational state of Unavailability Indicator TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.6 |
||||||
|
The value of tmnxOamPmStsTcaLossUndtAvlLTime indicates the UTC date
and time at the start of the measurement interval which generated the most recent Undetermined Availability Indicator Raise or Clear TCA for the specif… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.7 |
||||||
|
The value of tmnxOamPmStsTcaLossUndtAvlOperSt indicates the
operational state of Undetermined Availability Indicator TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.8 |
||||||
|
The value of tmnxOamPmStsTcaLossUndtUnavlLTim indicates the UTC date
and time at the start of the measurement interval which generated the most recent Undetermined Unavailability Indicator Raise or Clear TCA for the spe… |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.9 |
||||||
|
The value of tmnxOamPmStsTcaLossUndtUnavlOpSt indicates the
operational state of Undetermined Unavailability Indicator TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.12.1.10 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.13
·
1 row entry
·
2 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsTcaLossFwBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsTcaLossFwBwTable'
tmnxOamPmStsTcaLossFwBwTable contains statistics for loss-based OAM-PM Threshold Crossing Alerts (TCAs). The subset of the TCA loss statistics that are kept in the forward and backward directions is available using this table.
tmnxOamPmStsTcaLossFwBwEntry contains TCA statistics for the forward or
backward direction of one OAM-PM loss test. For example, a row may
contain TCA statistics for the forward direction for the SLM test
belonging to …
backward direction of one OAM-PM loss test. For example, a row may
contain TCA statistics for the forward direction for the SLM test
belonging to …
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsTcaLossAvgFlrLstTime indicates the UTC date
and time at the start of the measurement interval which generated the most recent Average Frame Loss Ratio (FLR) Raise or Clear TCA for the specified … |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.13.1.1 |
||||||
|
The value of tmnxOamPmStsTcaLossAvgFlrOperSt indicates the operational
state of Average Frame Loss Ratio (FLR) TCAs for the specified indices. |
TmnxOamPmStsTcaOperState Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.13.1.2 |
tmnxOamPmStsSessIpTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.14
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsSessIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsSessIpTable'
tmnxOamPmStsSessIpTable contains status information for OAM-PM sessions with tmnxOamPmCfgSessTestFamily equal to 'ip(2)'.
tmnxOamPmStsSessIpEntry contains status information for an OAM-PM
session with tmnxOamPmCfgSessTestFamily equal to 'ip(2)'.
session with tmnxOamPmCfgSessTestFamily equal to 'ip(2)'.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsSessIpSrcUdpPort indicates the source UDP
port allocated for the specified OAM-PM IP session. The allocation of source UDP ports is described in the DESCRIPTION clause of tmnxOamP… |
INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.14.1.1 |
tmnxOamPmStsTestTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.15
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsTestTable'
tmnxOamPmStsTestTable contains status information for OAM-PM tests.
Additional test status information is available in
tmnxOamPmCfgDelayDmmTable,
tmnxOamPmCfgDelayMplsTable,
tmnxOamPmCfgLossLmmTable,
tmnxOamPmCfgLossSlmTable, and
tmnxOamPmCfgTwampLtTable.
tmnxOamPmStsTestEntry contains status information for the OAM-PM test
specified by the indices.
A row is created/destroyed in this table when an OAM-PM test is
created/destroyed.
An OAM-PM test…
specified by the indices.
A row is created/destroyed in this table when an OAM-PM test is
created/destroyed.
An OAM-PM test…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsTestDetectTxError indicates a reason for the
specified test's current inability (if any) to launch request frames. For example, 'ethParentAdminDown(4)' could be returned for an SL… |
TmnxOamPmDetectableTxError Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.15.1.1 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16
·
1 row entry
·
9 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayMplsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayMplsTable'
tmnxOamPmStsDelayMplsTable contains the summarized MPLS DM (Delay Measurement) statistics for OAM Performance Monitoring Measurement Interval Data Sets. The packet delay summary statistics kept for MPLS DM tests are the same as the frame delay summary statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66.
tmnxOamPmStsDelayMplsEntry contains the summarized MPLS DM (Delay
Measurement) statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
When a row is created in tmnxOamPmStsBaseTable wit…
Measurement) statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
When a row is created in tmnxOamPmStsBaseTable wit…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayMplsFwdMin indicates the minimum delay
in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.1 |
|
The value of tmnxOamPmStsDelayMplsFwdMax indicates the maximum delay
in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.2 |
|
The value of tmnxOamPmStsDelayMplsFwdAvg indicates the average delay
in the forward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.3 |
|
The value of tmnxOamPmStsDelayMplsBwdMin indicates the minimum delay
in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.4 |
|
The value of tmnxOamPmStsDelayMplsBwdMax indicates the maximum delay
in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.5 |
|
The value of tmnxOamPmStsDelayMplsBwdAvg indicates the average delay
in the backward direction for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.6 |
|
The value of tmnxOamPmStsDelayMpls2wyMin indicates the minimum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.7 |
|
The value of tmnxOamPmStsDelayMpls2wyMax indicates the maximum two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.8 |
|
The value of tmnxOamPmStsDelayMpls2wyAvg indicates the average two-way
delay for the specified session, interval duration (e.g. 'mi15Minutes(2)'), interval number, and bin type (e.g. 'fd(1)'). |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.16.1.9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.17
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsDelayMplsBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsDelayMplsBinTable'
tmnxOamPmStsDelayMplsBinTable contains the per-bin MPLS DM (Delay Measurement) statistics for OAM Performance Monitoring Measurement Interval Data Sets. The packet delay statistics kept for MPLS DM tests are the same as the frame delay summary statistics specified for Ethernet DMM (Delay Measurement Message) tests in MEF-35 requirement R66.
tmnxOamPmStsDelayMplsBinEntry contains the per-bin MPLS DM (Delay
Measurement) statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
Rows are created in this table when a correspondin…
Measurement) statistics for one OAM Performance Monitoring Measurement
Interval Data Set.
Rows are created in this table when a correspondin…
| Column | Syntax | OID |
|---|---|---|
|
The value of tmnxOamPmStsDelayMplsBinNum specifies the bin number of
the statistics to be read. |
Unsigned32 Constraints: range: 0-9 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.17.1.1 |
|
The value of tmnxOamPmStsDelayMplsBinFwdCount indicates the number of
measurements in the forward direction that fall within the configured range (in microseconds) of the specified bin. For example, suppo… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.17.1.2 |
|
The value of tmnxOamPmStsDelayMplsBinBwdCount indicates the number of
measurements in the backward direction that fall within the configured range (in microseconds) of the specified bin. For example, supp… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.17.1.3 |
|
The value of tmnxOamPmStsDelayMplsBin2wyCount indicates the number of
two-way measurements that fall within the configured range (in microseconds) of the specified bin. For example, suppose the index valu… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.17.1.4 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.18
·
1 row entry
·
1 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsMplsTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsMplsTestTable'
tmnxOamPmStsMplsTestTable contains status information for OAM-PM MPLS
tests.
Additional status information for OAM-PM MPLS tests is available in
tmnxOamPmCfgDelayMplsTable and tmnxOamPmStsTestTable.
tmnxOamPmStsMplsTestEntry contains status information for the OAM-PM
MPLS test specified by the indices.
A row is created/destroyed in this table when an OAM-PM MPLS test is
created/destroyed.
…
MPLS test specified by the indices.
A row is created/destroyed in this table when an OAM-PM MPLS test is
created/destroyed.
…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsMplsTestRxStatus indicates the most recent
status received in an MPLS-DM response for the specified MPLS-DM test. |
TmnxOamPmMplsTestRxStatus Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.92.2.2.18.1.1 |
tmnxOamPmStsStrTable
table.1.3.6.1.4.1.6527.3.1.2.92.2.2.19
·
1 row entry
·
4 columns
Uses the nokia variant from
Command help
/opt/observium/mibs/nokia.
Walk tmnxOamPmStsStrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-PM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-PM-MIB::tmnxOamPmStsStrTable'
tmnxOamPmStsStrTable contains statistics for OAM-PM streaming sample
windows.
Streaming functionality is described in the DESCRIPTION clause of
tmnxOamPmCfgStrTmplTable.
tmnxOamPmStsStrEntry contains statistics for one OAM-PM streaming
sample window.
A row can be indexed by, for example,
{'oam_pm_sess_1', 'dmm(1)', 'fdAvg(1)', 'twoWay(3)'}.
When a row is re…
sample window.
A row can be indexed by, for example,
{'oam_pm_sess_1', 'dmm(1)', 'fdAvg(1)', 'twoWay(3)'}.
When a row is re…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The value of tmnxOamPmStsStrCloseTime indicates the UTC date and time
when the reported sample window closed. |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.19.1.1 |
||||
|
The value of tmnxOamPmStsStrSampleCount indicates the number of valid
measurements in the sample window. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.19.1.2 |
||||
|
The value of tmnxOamPmStsStrSuspect indicates whether or not the value
read using tmnxOamPmStsStrDelay is suspect. A value is suspect if the number of valid measurements in the sampling window (i.e. tmnxO… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.19.1.3 |
||||
|
The value of tmnxOamPmStsStrDelay indicates the delay measurement
specified by the tmnxOamPmCfgStrMetric INDEX for the sample window. For example, if tmnxOamPmCfgStrMetric is 'fdAvg(1)', then tmnxOamPmSts… |
microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.92.2.2.19.1.4 |