tmnxL2tpXtAvpCiscoNasPortEth

The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put
in the Cisco-NAS-Port AVP, for L2TP control messages related to a
PPPoE session in this L2TP protocol instance.
              
              
 <origin>               ::= 'i' | 'm' | 'o' | 'p' | 's'
              
 'i' - inner VLAN ID
 'm' - ISA MDA number  / ESA number
 'o' - outer VLAN ID
 'p' - port number
 's' - ISA slot number / ESA VAPP number
              
 Maximum 32 bits can be specified.
              
 If less than 32 bits are specified, the least significant bits are
 used and the omitted higher bits are set to zero.
              
 Note that 'm' and 's' will contain ISA or ESA numbers, depending on
 the personality of the L2TP group.
              
 Example:  *12o*12i*2s01 means 'the 12 least significant bits of the
 outer VLAN ID, followed by the 12 least significant bits of the inner
 VLAN ID, followed by the two least significant bits of the ISA slot
 number or the ESA VAPP number, followed by a zero and a one-bit',
 stored in network order in the least significant bits:
 0000ooooooooooooiiiiiiiiiiiiss01.
              
 An empty string specifies that the Extended NAS-Port AVP must not be
 transmitted.

MIB

TIMETRA-L2TP-MIB

OID

.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.8

Type

column

Access

readwrite

Status

current

Parent

tmnxL2tpXtEntry