TIMETRA-L2TP-MIB Table View

A table that contains L2TP configuration information about virtual
routers.
          
Rows in this table can be created or deleted via SNMP operations.
          
Rows in this table are automatically deleted when the corresponding
row in the vRtrConfTable is deleted.
          
The conceptual row that corresponds to the Base router instance,
however, is automatically created by the system, and cannot be created
or deleted via SNMP operations.

tmnxL2tpEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1

L2TP specific information about a virtual router.

Each entry represents a L2TP protocol instance.

Indexes

TIMETRA-VRTR-MIBvRtrID

Column	Syntax	OID
tmnxL2tpLastMgmtChange The value of tmnxL2tpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.1
tmnxL2tpAdminState The value of the object tmnxL2tpAdminState specifies the administrative state of this L2TP protocol instance.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.2
tmnxL2tpSessionLimit The value of tmnxL2tpSessionLimit specifies the maximum number of sessions in this L2TP protocol instance. The value '-2' is not allowed because this is the widest scope for TmnxL2tpSessionLimit.	TmnxL2tpSessionLimitr/w Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.3
tmnxL2tpReceiveWindowSize The value of tmnxL2tpReceiveWindowSize specifies the Receive Window Size in this L2TP protocol instance. The value '0' is not allowed.	TmnxL2tpReceiveWindowSizer/w Type Constraints: range: 0 range: 4..1024	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.4
tmnxL2tpRowStatus The value of tmnxL2tpRowStatus specifies the row status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.5
tmnxL2tpPeerAddrChangePlcy The value of the object tmnxL2tpPeerAddrChangePlcy specifies what to do in case the system receives a L2TP response from another address than the one the request was sent to, for a tunnel in this L2TP protocol instance.	TmnxL2tpPeerAddrChangePolicyr/w Type Values: 1 accept 2 ignore 3 reject	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.6
tmnxL2tpAvpExclude The value of the object tmnxL2tpAvpExclude specifies what AVPs (Attribute Value Pairs) to exclude from L2TP control outgoing messages related to a session in this L2TP protocol instance.	Bitsr/w Enumerated Values: 0 callingNumber 1 initialRxLcpConfReq	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.7
tmnxL2tpAvpCallingNumberSpec The value of the object tmnxL2tpAvpCallingNumberSpec specifies what string to put in the Calling Number AVP, for L2TP control messages related to a session in this L2TP protocol instance. This value is no…	TIMETRA-TC-MIBTmnxAsciiSpecificationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.8
tmnxL2tpAccountingPolicy The value of the object tmnxL2tpAccountingPolicy specifies the RADIUS accounting policy to use in this L2TP protocol instance. It refers to a conceptual row in the tmnxL2tpApTable. The valu…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.10
tmnxL2tpHelloInterval The value of tmnxL2tpHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. The value '-…	secondsTmnxL2tpTunnelHelloIntervalr/w Type Constraints: range: -2..-1 range: 10..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.11
tmnxL2tpIdleTO The value of tmnxL2tpIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. …	secondsTmnxL2tpTunnelIdleTOr/w Type Constraints: range: -2..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.12
tmnxL2tpDestructTO The value of tmnxL2tpDestructTO specifies the period of time that the data of a disconnected tunnel will persist before being removed. The value '-2' is not allowed because this is the widest scope for Tm…	secondsTmnxL2tpTunnelDestructTOr/w Type Constraints: range: -2 range: 60..86400	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.13
tmnxL2tpMaxRetxEstab The value of tmnxL2tpMaxRetxEstab specifies the number of retries allowed for established tunnels before their control connection goes down. The value '-2' is not allowed because this is the widest scope …	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.14
tmnxL2tpMaxRetxNotEstab The value of tmnxL2tpMaxRetxNotEstab specifies the number of retries allowed for unestablished tunnels before their control connection goes down. The value '-2' is not allowed because this is the widest s…	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.15
tmnxL2tpTunnelSessionLimit The value of tmnxL2tpTunnelSessionLimit specifies the maximum number of sessions in all Layer Two Tunneling Protocol Tunnels of this virtual router. The number of sessions allowed for a tunnel is currentl…	TmnxL2tpSessionLimitr/w Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.16
tmnxL2tpGroupSessionLimit The value of tmnxL2tpGroupSessionLimit specifies the maximum number of sessions in all Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The value '-2' is not allowed because this is the …	TmnxL2tpSessionLimitr/w Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.17
tmnxL2tpAvpHiding The value of the object tmnxL2tpAvpHiding specifies the method to be used for the authentication of the tunnels in this virtual router. The value 'default' is not allowed because this is the widest scope …	TmnxL2tpAvpHidingModer/w Type Values: 1 default 2 never 3 sensitive 4 always	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.18
tmnxL2tpDoChallenge The value of the object tmnxL2tpDoChallenge specifies when challenge-response is to be used for the authentication of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. …	TmnxL2tpDoChallenger/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.19
tmnxL2tpSecret The value of the object tmnxL2tpSecret specifies the password to be used to calculate the challenge response of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The password is also …	TmnxL2tpAuthSecretr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.20
tmnxL2tpSessionAssignMethod The value of the object tmnxL2tpSessionAssignMethod specifies the method to be used for the authentication of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The valu…	TmnxL2tpSessionAssignMethodr/w Type Values: 0 default 1 existingFirst 2 weighted 3 weightedRandom	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.21
tmnxL2tpLocalName The value of the object tmnxL2tpLocalName specifies the host name used by this system for the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router during the authentication phase of tunnel es…	TmnxL2tpHostNameOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.22
tmnxL2tpAddrType The value of tmnxL2tpAddrType specifies the address type of tmnxL2tpAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.23
tmnxL2tpAddr The value of tmnxL2tpAddr specifies the local IP address of the tunnels in the L2TP Tunnel Groups of this virtual router.	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.24
tmnxL2tpAvpIgnore The value of the object tmnxL2tpAvpIgnore specifies what AVPs (Attribute Value Pairs) to ignore from L2TP control incoming messages related to a session in this L2TP protocol instance.	Bitsr/w Enumerated Values: 0 sequencing-required	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.25
tmnxL2tpRtmDebounceTime The value of the object tmnxL2tpRtmDebounceTime specifies the debounce time the system applies before reacting to relevant events signalled by the system's Routing Table Manager (RTM). The time is express…	msUnsigned32r/w Constraints: range: 0-5000 range: 4294967295-4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.2.1.27

A table that contains L2TP configuration information about virtual
routers.
          
A conceptual row in this table is created automatically by the system
when a row in the tmnxL2tpTable is created.
          
Rows in this table are automatically deleted when the corresponding
row in the vRtrConfTable or the tmnxL2tpTable is deleted.
          
The conceptual row that corresponds to the Base router instance,
however, is automatically created by the system, and cannot be created
or deleted via SNMP operations.

tmnxL2tpXtEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1

L2TP specific information about a virtual router.

Each entry represents a L2TP protocol instance.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpXtNextAttempt The value of tmnxL2tpXtNextAttempt specifies the next tunnel to be used in case the session setup fails. A value of 'samePreferenceLevel(0)' specifies to try first any alternative tunnel from the same pre…	Enumerationr/w Enumerated Values: 0 samePreferenceLevel 1 nextPreferenceLevel	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.1
tmnxL2tpXtLastMgmtChange The value of tmnxL2tpXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.2
tmnxL2tpXtTuSelBlacklistReason The value of tmnxL2tpXtTuSelBlacklistReason specifies the CDN or StopCCN result codes or tunnel or session setup failure condition that determine which tunnels are added to the tunnel-selection-blacklist. …	Bitsr/w Enumerated Values: 0 addrChangeTimeout 1 cdnErrCode 2 cdnInvDest 3 cdnPermNoFacilities 4 cdnTmpNoFacilities 5 stopCcnErrCode 6 stopCcnOther 7 txCdnNotEstablishedInTime	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.3
tmnxL2tpXtTuSelBlacklistMaxTime The value of tmnxL2tpXtTuSelBlacklistMaxTime specifies the maximum time a tunnel or peer may remain in the tunnel-selection-blacklist.	minutesInteger32r/w Constraints: range: 1-60	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.4
tmnxL2tpXtTuSelBlacklistLength The value of tmnxL2tpXtTuSelBlacklistLength specifies how many items (tunnels or peers) can be in the tunnel-selection-blacklist. If a tunnel or peer needs to be added to the tunnel-selection-blacklist an…	minutesInteger32r/w Constraints: range: -1--1 range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.5
tmnxL2tpXtTuSelBlacklistToAction The value of tmnxL2tpXtTuSelBlacklistToAction specifies the action to be taken when a tunnel has been in the tunnel-selection-blacklist for the time specified in tmnxL2tpXtTuSelBlacklistMaxTime. A value o…	Enumerationr/w Enumerated Values: 0 removeFromBlacklist 1 tryOneSession	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.6
tmnxL2tpXtReplaceResultCodes The value of tmnxL2tpXtReplaceResultCodes specifies the return codes that must be replaced by another appropriate result code. This field is typically used to solve interoperability issues. The return cod…	Bitsr/w Enumerated Values: 0 cdnInvDest 1 cdnPermNoFacilities 2 cdnTmpNoFacilities	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.7
tmnxL2tpXtAvpCiscoNasPortEth The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoE session in this L2TP protocol instance. <orig…	TIMETRA-TC-MIBTmnxBinarySpecificationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.8
tmnxL2tpXtAvpCiscoNasPortAtm The value of tmnxL2tpXtAvpCiscoNasPortAtm specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoA (PPP over ATM) session in this L2TP protocol instance. …	TIMETRA-TC-MIBTmnxBinarySpecificationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.9
tmnxL2tpXtDfBitLac The value of tmnxL2tpXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS. If the value of this object is 'always', the DF…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.10
tmnxL2tpXtFoRecoveryMethod The value of the object tmnxL2tpXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this virtual router between this system (perfor…	TmnxL2tpFailoverRecoveryMethodr/w Type Values: 0 default 1 mcs 2 recoveryTunnel	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.11
tmnxL2tpXtFoRecoveryTime The value of tmnxL2tpXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. The value '-2' is not allowed beca…	secondsTmnxL2tpFailoverRecoveryTimer/w Type Constraints: range: -2 range: 0..900	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.12
tmnxL2tpXtFoRecoveryMaxSeLifeT The value of tmnxL2tpXtFoRecoveryMaxSeLifeT specifies the subset of sessions that this system attempts to synchronize in the Session State Synchronization phase as described in RFC 4951 'Fail Over Extensions for Layer 2…	minutesUnsigned32r/w Constraints: range: 2-4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.13

A table that contains L2TPv3 configuration information about virtual
routers.
          
A conceptual row in this table is created automatically by the system
when a row in the tmnxL2tpTable is created.
          
Rows in this table are automatically deleted when the corresponding
row in the vRtrConfTable or the tmnxL2tpTable is deleted.
          
The conceptual row that corresponds to the Base router instance,
however, is automatically created by the system, and cannot be created
or deleted via SNMP operations.

tmnxL2tpV3Entry row .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1

L2TPv3 specific information about a virtual router.

Each entry represents a L2TPv3 protocol instance.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpV3LastCh The value of tmnxL2tpV3LastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.1
tmnxL2tpV3CookieLen The value of tmnxL2tpV3CookieLen specifies the length of the cookie added to the outgoing data messages of the L2TP session. The value '-2' is not allowed.	Integer32r/w Constraints: range: 0-0 range: 4-4 range: 8-8	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.2
tmnxL2tpV3DigestType The value of tmnxL2tpV3DigestType specifies the digest type to be used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel. The value 'default' is not allowed because this is the…	TmnxL2tpDigestTyper/w Type Values: 0 default 1 none 2 md5 3 sha1	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.3
tmnxL2tpV3NonceLen The value of tmnxL2tpV3NonceLen specifies the length of the nonce in the Control Message Authentication Nonce AVP added to outgoing control messages. The value '-2' is not allowed.	Integer32r/w Constraints: range: 0-0 range: 16-64	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.4
tmnxL2tpV3TransportType The value of tmnxL2tpV3TransportType specifies the list of allowed transport types for L2TPV3.	Bitsr/w Enumerated Values: 0 ip	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.5
tmnxL2tpV3ReconnectTimeout The value of tmnxL2tpV3ReconnectTimeout specifies the time the ethernet tunnel client of L2TP waits before a retry of the session after session setup failed or the session was closed. The value '-2' is no…	secondsInteger32r/w Constraints: range: -1--1 range: 10-3600	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.6
tmnxL2tpV3Secret The value of the object tmnxL2tpV3Secret specifies the password to be used for AVP hiding and digest calculation for the tunnels in the Layer Two Tunneling Protocol V3 and V3draft Tunnel Groups of this virtual router. …	TmnxL2tpAuthSecretr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.7
tmnxL2tpV3PubTcpMssAdjust The value of tmnxL2tpV3PubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this virtual router which is sent from the public network to the private network. The system may us…	octetsInteger32r/w Constraints: range: -1--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.8
tmnxL2tpV3PrivTcpMssAdjust The value of tmnxL2tpV3PrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this virtual router which is sent from the private network to the public network. The system may u…	octetsInteger32r/w Constraints: range: -1--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.4.1.9

A table that contains L2TP configuration information about virtual
routers.
          
The system automatically creates an entry in this table for each
virtual router where L2TP is supported.
          
Only the Base router supports L2TP.

tmnxL2tpStatEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1

L2TP specific information about a virtual router.

Each entry represents a L2TP protocol instance.

Indexes

TIMETRA-VRTR-MIBvRtrID

Column	Syntax	OID
tmnxL2tpStatCleared The value of the object tmnxL2tpStatCleared indicates the value of sysUpTime when the system statistics were cleared. The value zero indicates that the system statistics have not been cleared since the la…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.1
tmnxL2tpStatTotalTunnels The value of tmnxL2tpStatTotalTunnels indicates the total number of tunnel set up attempts since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.2
tmnxL2tpStatFailedTunnels The value of tmnxL2tpStatFailedTunnels indicates the number of tunnels that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the system s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.3
tmnxL2tpStatFailedTuAuth The value of tmnxL2tpStatFailedTuAuth indicates the number of tunnels that failed authentication since the last re-initialization of the local network management subsystem, or the last time the system statistics were cl…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.4
tmnxL2tpStatActiveTunnels The value of tmnxL2tpStatActiveTunnels indicates the number of tunnels currently established.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.5
tmnxL2tpStatTotalSessions The value of tmnxL2tpStatTotalSessions indicates the number of session creation attempts since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.6
tmnxL2tpStatFailedSessions The value of tmnxL2tpStatFailedSessions indicates the number of sessions that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the system…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.7
tmnxL2tpStatActiveSessions The value of tmnxL2tpStatActiveSessions indicates the number of sessions currently established.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.8
tmnxL2tpStatCurrentTunnels The value of tmnxL2tpStatCurrentTunnels indicates the actual number of tunnels.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.9
tmnxL2tpStatCurrentSessions The value of tmnxL2tpStatCurrentSessions indicates the actual number of sessions.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.10
tmnxL2tpStatCurrSelBlacklstLen The value of tmnxL2tpStatCurrSelBlacklstLen indicates the actual number of tunnels and peers in the tunnel-selection-blacklist.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.11
tmnxL2tpStatUnavailTunnelIds The value of tmnxL2tpStatUnavailTunnelIds indicates the number of tunnel identifiers that is unavailable for the L2TP protocol because they are used by some other application.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.1.2.1.1.12

The L2TP Tunnel configuration table contains objects to configure L2TP
Tunnel Groups.

tmnxL2tpTgCfgEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1

Each conceptual row represents a Layer Two Tunneling Protocol Tunnel
Group.

Entries in this table can be created or deleted via SNMP operations.

Indexes

TIMETRA-VRTR-MIBvRtrID tmnxL2tpTgCfgName

Column	Syntax	OID
tmnxL2tpTgCfgName The value of the object tmnxL2tpTgCfgName specifies the string to identify this Layer Two Tunneling Protocol Tunnel Group.	TIMETRA-TC-MIBTmnxL2tpTunnelGroupName Type Constraints: range: 1..63	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.1
tmnxL2tpTgCfgRowStatus The value of tmnxL2tpTgCfgRowStatus specifies the row status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.2
tmnxL2tpTgCfgLastMgmtChange The value of tmnxL2tpTgCfgLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.3
tmnxL2tpTgCfgDescription The value of tmnxL2tpTgCfgDescription specifies the description of this Layer Two Tunneling Protocol Tunnel Group.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.4
tmnxL2tpTgCfgAdminState The value of tmnxL2tpTgCfgAdminState specifies the administrative state of this Layer Two Tunneling Protocol Tunnel Group.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.5
tmnxL2tpTgCfgSecret The value of the object tmnxL2tpTgCfgSecret specifies the password to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. For any given tunnel in this group, t…	TmnxL2tpAuthSecretr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.6
tmnxL2tpTgCfgHelloInterval The value of tmnxL2tpTgCfgHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. A value…	secondsTmnxL2tpTunnelHelloIntervalr/w Type Constraints: range: -2..-1 range: 10..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.7
tmnxL2tpTgCfgIdleTO The value of tmnxL2tpTgCfgIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. …	secondsTmnxL2tpTunnelIdleTOr/w Type Constraints: range: -2..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.8
tmnxL2tpTgCfgDestructTO The value of tmnxL2tpTgCfgDestructTO specifies the period of time that the data of a disconnected tunnel will persist before being removed. A value of '-2' specifies that the value must be set to the actu…	secondsTmnxL2tpTunnelDestructTOr/w Type Constraints: range: -2 range: 60..86400	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.9
tmnxL2tpTgCfgMaxRetxEstab The value of tmnxL2tpTgCfgMaxRetxEstab specifies the number of retries allowed for established tunnels before their control connection goes down. A value of '-2' specifies that the value must be set to th…	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.10
tmnxL2tpTgCfgMaxRetxNotEstab The value of tmnxL2tpTgCfgMaxRetxNotEstab specifies the number of retries allowed for unestablished tunnels before their control connection goes down. A value of '-2' specifies that the value must be set …	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.11
tmnxL2tpTgCfgSessionLimit The value of tmnxL2tpTgCfgSessionLimit specifies the maximum number of sessions in this Layer Two Tunneling Protocol Tunnel Group. A value of '-2' specifies that the value must be set to the actual value …	TmnxL2tpSessionLimitr/w Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.12
tmnxL2tpTgCfgAvpHiding The value of the object tmnxL2tpTgCfgAvpHiding specifies the method to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' specifies that t…	TmnxL2tpAvpHidingModer/w Type Values: 1 default 2 never 3 sensitive 4 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.13
tmnxL2tpTgCfgSessionAssignMethod The value of the object tmnxL2tpTgCfgSessionAssignMethod specifies the method to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' specif…	TmnxL2tpSessionAssignMethodr/w Type Values: 0 default 1 existingFirst 2 weighted 3 weightedRandom	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.14
tmnxL2tpTgCfgLocalName The value of the object tmnxL2tpTgCfgLocalName specifies the host name used by this system for the tunnels in this Layer Two Tunneling Protocol Tunnel Group during the authentication phase of tunnel establishment. …	TmnxL2tpHostNameOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.15
tmnxL2tpTgCfgDoChallenge The value of the object tmnxL2tpTgCfgDoChallenge specifies when challenge-response is to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default…	TmnxL2tpDoChallenger/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.16
tmnxL2tpTgCfgReceiveWindowSize The value of the object tmnxL2tpTgCfgReceiveWindowSize specifies the Receive Window Size of the tunnels in this L2TP Tunnel Group. The value zero specifies that the value must be set to the actual value o…	TmnxL2tpReceiveWindowSizer/w Type Constraints: range: 0 range: 4..1024	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.17
tmnxL2tpTgCfgIsaGrpId The value of tmnxL2tpTgCfgIsaGrpId specifies the L2TP Integrated Service Adaptor group for the tunnels in this L2TP Tunnel Group.	TmnxL2tpIsaGrpIdOrZeror/w Type Constraints: range: 0..4	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.19
tmnxL2tpTgCfgAddrType The value of tmnxL2tpTgCfgAddrType specifies the address type of tmnxL2tpTgCfgAddr. The value 'unknown' specifies that the value must be set to the actual value of the object tmnxL2tpAddrType.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.20
tmnxL2tpTgCfgAddr The value of tmnxL2tpTgCfgAddr specifies the local IP address of the tunnels in this L2TP Tunnel Group. The value ''H specifies that the value must be set to the actual value of the object tmnxL2tpAddr.	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.21
tmnxL2tpTgCfgLoadBalanceMethod The value of the object tmnxL2tpTgCfgLoadBalanceMethod specifies the method to be used for load-balancing sessions across ISA MDA in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' is …	TmnxL2tpIsaMdaLoadBalanceMethodr/w Type Values: 0 default 1 perSession 2 perTunnel	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.25
tmnxL2tpTgCfgAccountingPolicy The value of the object tmnxL2tpTgCfgAccountingPolicy specifies the RADIUS accounting policy to be used in this Layer Two Tunneling Protocol Tunnel Group. It refers to a conceptual row in the tmnxL2tpApTa…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.26
tmnxL2tpTgCfgProtocol The value of the object tmnxL2tpTgCfgProtocol specifies the L2TP protocol version supported in this Layer Two Tunneling Protocol Tunnel Group. The object value can only be changed at LT2P Tunnel Group cre…	TmnxL2tpProtocolVersionr/w Type Values: 0 undefined 1 v2 2 v3 3 v3draft	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.2.1.27

The L2TP Tunnel configuration table contains objects to configure PPP
(Point to Point Protocol) on L2TP LNS Tunnel Groups.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpLnsTgPppEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1

Each conceptual row represents PPP information about a Layer Two
Tunneling Protocol LNS Tunnel Group.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpLnsTgPppLastMgmtChange The value of tmnxL2tpLnsTgPppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.1
tmnxL2tpLnsTgPppAuthPlcy The value of the object tmnxL2tpLnsTgPppAuthPlcy specifies the authentication policy used by this system for the tunnels in this L2TP LNS Tunnel Group during the authentication phase of tunnel establishment. …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.2
tmnxL2tpLnsTgPppAuthProtocol The value of the object tmnxL2tpLnsTgPppAuthProtocol specifies for the tunnels in this L2TP LNS Tunnel Group what PPP authentication protocol(s) will be negotiated during the LCP phase. The value 'defaul…	TmnxL2tpPppAuthenticationr/w Type Values: 0 default 1 pap 2 chap 3 prefChap 4 prefPap	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.3
tmnxL2tpLnsTgPppUserDb The value of the object tmnxL2tpLnsTgPppUserDb specifies the local user database to use for PADI or PPP PAP/CHAP based authentication during the authentication phase of tunnel establishment. An empty stri…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.4
tmnxL2tpLnsTgPppDefaultService The value of tmnxL2tpLnsTgPppDefaultService specifies the service ID of the service where the PPP sessions are established when the authentication server does not specify the service ID.	TIMETRA-TC-MIBTmnxServIdr/w Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.5
tmnxL2tpLnsTgPppDefaultGroupIf The value of tmnxL2tpLnsTgPppDefaultGroupIf specifies the group interface where the PPP sessions are established when the authentication server does not specify the group interface.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.6
tmnxL2tpLnsTgPppProxyLcp The value of tmnxL2tpLnsTgPppProxyLcp specifies if this system reuses the result of the Link Control Protocol (LCP) negotiation done by the proxy (LAC). If the value of this object is 'always', the Proxy …	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.7
tmnxL2tpLnsTgPppProxyAuth The value of tmnxL2tpLnsTgPppProxyAuth specifies if this system reuses the authentication done by the proxy (LAC). If the value of this object is 'always', the Authentication AVPs received from the LAC ar…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.8
tmnxL2tpLnsTgPppMtu The value of tmnxL2tpLnsTgPppMtu specifies the MTU (Maximum Transmission Unit) for the tunnels in this L2TP LNS Tunnel Group. The value zero is not allowed.	TmnxL2tpPppMtur/w Type Constraints: range: 0 range: 512..9212	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.9
tmnxL2tpLnsTgPppLcpKaInterval The value of tmnxL2tpLnsTgPppLcpKaInterval specifies for the tunnels in this L2TP LNS Tunnel Group the time interval in seconds at which LCP echo requests are transmitted. The value '0' is not allowed.	secondsTmnxL2tpLcpKaIntervalr/w Type Constraints: range: 0 range: 10..300	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.10
tmnxL2tpLnsTgPppLcpKaHoldUp The value of tmnxL2tpLnsTgPppLcpKaHoldUp specifies for the tunnels in this L2TP LNS Tunnel Group how many LCP keepalive messages can be missed before the related session is brought down. The value '0' is …	TmnxL2tpLcpKaHoldUpMplierr/w Type Constraints: range: 0..5	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.11
tmnxL2tpLnsTgPppIpcpSubnetNeg The value of tmnxL2tpLnsTgPppIpcpSubnetNeg specifies for the tunnels in this L2TP LNS Tunnel Group if IPCP subnet negotiation is enabled.	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.13
tmnxL2tpLnsTgPppLcpIgnoreMagic The value of tmnxL2tpLnsTgPppLcpIgnoreMagic specifies for the tunnels in this L2TP LNS Tunnel Group if checking the Magic-Number field in LCP Echo-Request and Echo-Reply messages is skipped. If the value …	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.20
tmnxL2tpLnsTgPppMinChapChall The value of tmnxL2tpLnsTgPppMinChapChall specifies the minimum length of the CHAP challenge generated by the system. Set the value of this object together with the value of tmnxL2tpLnsTgPppMaxChapChall. …	Unsigned32r/w Constraints: range: 8-64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.21
tmnxL2tpLnsTgPppMaxChapChall The value of tmnxL2tpLnsTgPppMaxChapChall specifies the maximum length of the CHAP challenge generated by the system. Set the value of this object together with the value of tmnxL2tpLnsTgPppMinChapChall. …	Unsigned32r/w Constraints: range: 8-64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.22
tmnxL2tpLnsTgPppLcpForceAckAccm The value of tmnxL2tpLnsTgPppLcpForceAckAccm specifies for the tunnels in this L2TP LNS Tunnel Group if this system acknowledges the LCP Asynchronous Control Character Map (ACCM) configuration option during the LCP nego…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.23
tmnxL2tpLnsTgPppDefaultSvcName The value of tmnxL2tpLnsTgPppDefaultSvcName specifies the name of the service where the PPP sessions are established when the authentication server does not specify the service ID.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.24
tmnxL2tpLnsTgPppRejDisabledNcp The value of tmnxL2tpLnsTgPppRejDisabledNcp specifies for the tunnels in this L2TP LNS Tunnel Group whether disabled NCP's (Network Control Protocol) are rejected or silently ignored. When the value of th…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.3.1.25

The L2TP Tunnel configuration table contains objects to configure
MLPPP (Multi Link Point to Point Protocol) on L2TP Tunnel Groups.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpTgMlpppEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1

Each conceptual row represents MLPPP information about a Layer Two
Tunneling Protocol LNS Tunnel Group.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTgMlpppLastMgmtChange The value of tmnxL2tpTgMlpppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.1
tmnxL2tpTgMlpppAdminState The value of tmnxL2tpTgMlpppAdminState specifies the administrative state of MLPPP for this Layer Two Tunneling Protocol Tunnel Group.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.2
tmnxL2tpTgMlpppMaxLinks The value of the object tmnxL2tpTgMlpppMaxLinks specifies the maximum number of MLPPP links. The value of this object is only relevant for tunnels where this system performs the LNS role.	Unsigned32r/w Constraints: range: 1-8	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.3
tmnxL2tpTgMlpppInterleave The value of tmnxL2tpTgMlpppInterleave specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.4
tmnxL2tpTgMlpppMaxFragDelay The value of tmnxL2tpTgMlpppMaxFragDelay specifies the maximum delay for fragments for the tunnels in this L2TP LNS Tunnel Group. The value zero means 'no fragmentation'. The value of this …	millisecondsTmnxL2tpMlpppMaxFragDelayr/w Type Constraints: range: 0 range: 5..1000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.5
tmnxL2tpTgMlpppReassemblyTo The value of tmnxL2tpTgMlpppReassemblyTo specifies the reassembly timeout for fragments for the tunnels in this L2TP LNS Tunnel Group. The value zero is not allowed. The value of this objec…	millisecondsUnsigned32r/w Constraints: range: 100-100 range: 1000-1000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.6
tmnxL2tpTgMlpppShortSeqNumberRx The value of tmnxL2tpTgMlpppShortSeqNumberRx specifies if this system requests to receive short sequence numbers from the peer. If the value of this object is 'always', this system includes the Short Sequ…	TmnxAlwaysOrNeverr/w Type Values: 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.7
tmnxL2tpTgMlpppEpClass The value of tmnxL2tpTgMlpppEpClass specifies the type of endpoint. If the value of 'tmnxL2tpTgMlpppEpClass' is equal to 'ipv4Address', the address for the MLPPP Endpoint Discriminator Option is taken fro…	TmnxL2tpMlpppEndpointClassr/w Type Values: 0 default 2 ipv4Address 3 macAddress	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.8
tmnxL2tpTgMlpppEpIpv4Address The value of tmnxL2tpTgMlpppEpIpv4Address specifies the class 2 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTgMlpppEpClass is equal to 'ipv4Address', a value of a…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.9
tmnxL2tpTgMlpppEpMacAddress The value of tmnxL2tpTgMlpppEpMacAddress specifies the class 3 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTgMlpppEpClass is equal to 'macAddress', a value of all…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.4.1.10

The L2TP Extended Tunnel configuration table contains more objects to
configure L2TP Tunnel Groups.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpTgXtEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.1.5.1

Each conceptual row represents information about a Layer Two Tunneling
Protocol Tunnel Group.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTgXtLastMgmtChange The value of tmnxL2tpTgXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.5.1.1
tmnxL2tpTgXtDfBitLac The value of tmnxL2tpTgXtDfBitLac specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream traf…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.5.1.4
tmnxL2tpTgXtFoRecoveryMethod The value of the object tmnxL2tpTgXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this tunnel group between this system (perfor…	TmnxL2tpFailoverRecoveryMethodr/w Type Values: 0 default 1 mcs 2 recoveryTunnel	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.5.1.5
tmnxL2tpTgXtFoRecoveryTime The value of the object tmnxL2tpTgXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. A value of '-2' speci…	TmnxL2tpFailoverRecoveryTimer/w Type Constraints: range: -2 range: 0..900	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.5.1.6

The L2TP V3 Tunnel configuration table contains objects to configure
L2TP V3 Tunnel Groups.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpV3TgEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1

Each conceptual row represents information about a Layer Two Tunneling
Protocol V3 Tunnel Group.

Conceptual rows that correspond to V2 Tunnel Groups are immutable and
can have attribute values that differ f…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpV3TgLastCh The value of tmnxL2tpV3TgLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.1
tmnxL2tpV3TgCookieLen The value of tmnxL2tpV3TgCookieLen specifies the length of the cookie added to the outgoing data messages of the L2TP session.	TmnxL2tpCookieLengthr/w Type Constraints: range: -2 range: 0 range: 4 range: 8	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.2
tmnxL2tpV3TgDigestType The value of tmnxL2tpV3TgDigestType specifies the digest type to be used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel.	TmnxL2tpDigestTyper/w Type Values: 0 default 1 none 2 md5 3 sha1	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.3
tmnxL2tpV3TgNonceLen The value of tmnxL2tpV3TgNonceLen specifies the length of the nonce in the Control Message Authentication Nonce AVP added to outgoing control messages.	TmnxL2tpNonceLengthr/w Type Constraints: range: -2 range: 0 range: 16..64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.4
tmnxL2tpV3TgPwCapList The value of tmnxL2tpV3TgPwCapList specifies the Pseudo Wire capture list type(s) to be accepted in the incoming control messages of the L2TP tunnel.	TmnxL2tpConfPwTyper/w Type Values: 0 ethernet 1 ethernetVlan	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.5
tmnxL2tpV3TgReconnectTimeout The value of tmnxL2tpV3TgReconnectTimeout specifies the time the ethernet tunnel client of L2TP waits before a retry of the session after session setup failed or the session was closed.	secondsTmnxL2tpReconnectTimeoutr/w Type Constraints: range: -2..-1 range: 10..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.6
tmnxL2tpV3TgRemRtrId The value of tmnxL2tpV3TgRemRtrId specifies the router-id that is expected in the incoming control messages of the L2TP tunnel. An address 0.0.0.0 means that the router-id in the incoming control messages…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.7
tmnxL2tpV3TgTrackPassChng The value of tmnxL2tpV3TgTrackPassChng specifies the tracking of a password change for the L2TP tunnel.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.8
tmnxL2tpV3TgSecret The value of the object tmnxL2tpV3TgSecret specifies the password to be used for AVP hiding and digest calculation for the tunnels in the Layer Two Tunneling Protocol V3 and V3draft Tunnel Group. This val…	TmnxL2tpAuthSecretr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.9
tmnxL2tpV3TgPubTcpMssAdjust The value of tmnxL2tpV3TgPubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the public network to the private network. The system may use this …	octetsInteger32r/w Constraints: range: -2--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.10
tmnxL2tpV3TgPrivTcpMssAdjust The value of tmnxL2tpV3TgPrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the private network to the public network. The system may use this…	octetsInteger32r/w Constraints: range: -2--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.1.6.1.11

The tmnxL2tpTgStatTable contains status and statistics information
about Layer Two Tunneling Protocol Tunnel Groups.
          
The tmnxL2tpTgStatTable has an entry for each L2TP Tunnel Group.

tmnxL2tpTgStatEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1

Each row entry contains status and statistics about a L2TP tunnel
group.

Rows are created or removed automatically by the system.

Indexes

TIMETRA-VRTR-MIBvRtrID tmnxL2tpTgStatName

Column	Syntax	OID
tmnxL2tpTgStatName The value of the object tmnxL2tpTgStatName indicates the string to identify this Layer Two Tunneling Protocol Tunnel Group.	TIMETRA-TC-MIBTmnxL2tpTunnelGroupName Type Constraints: range: 1..63	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.1
tmnxL2tpTgStatState The value of tmnxL2tpTgStatState indicates the operational state of this Layer Two Tunneling Protocol Tunnel Group.	TmnxL2tpTgOperState Type Values: 1 active 2 drain	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.2
tmnxL2tpTgStatCleared The value of the object tmnxL2tpTgStatCleared indicates the value of sysUpTime when the tunnel group statistics were cleared. The value zero indicates that the statistics have not been cleared since the l…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.3
tmnxL2tpTgStatTotalTunnels The value of tmnxL2tpTgStatTotalTunnels indicates the total number of tunnel set up attempts in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.4
tmnxL2tpTgStatFailedTunnels The value of tmnxL2tpTgStatFailedTunnels indicates the number of tunnels in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system statistics were clea…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.5
tmnxL2tpTgStatFailedTuAuth The value of tmnxL2tpTgStatFailedTuAuth indicates the number of tunnels in this tunnel group that failed authentication since the last re-initialization of the local network management subsystem, or the last time the s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.6
tmnxL2tpTgStatActiveTunnels The value of tmnxL2tpTgStatActiveTunnels indicates the number of tunnels currently established in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.7
tmnxL2tpTgStatTunnels The value of tmnxL2tpTgStatTunnels indicates the actual number of tunnels in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.8
tmnxL2tpTgStatTotalSessions The value of tmnxL2tpTgStatTotalSessions indicates the number of session creation attempts in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system st…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.9
tmnxL2tpTgStatFailedSessions The value of tmnxL2tpTgStatFailedSessions indicates the number of sessions in this tunnel group that failed to reach the established state since the last re-initialization of the local network management subsystem, or …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.10
tmnxL2tpTgStatActiveSessions The value of tmnxL2tpTgStatActiveSessions indicates the number of sessions currently established in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.11
tmnxL2tpTgStatSessions The value of tmnxL2tpTgStatSessions indicates the actual number of sessions in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.12
tmnxL2tpTgStatControlRxOctets The value of tmnxL2tpTgStatControlRxOctets indicates the number of control channel octets received by the current tunnels in this tunnel group.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.13
tmnxL2tpTgStatControlRxOctetsLw The value of tmnxL2tpTgStatControlRxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTgStatControlRxOctets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.14
tmnxL2tpTgStatControlRxOctetsHw The value of tmnxL2tpTgStatControlRxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTgStatControlRxOctets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.15
tmnxL2tpTgStatControlRxPkts The value of tmnxL2tpTgStatControlRxPkts indicates the accumulated number of control packets received by the current tunnels in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.16
tmnxL2tpTgStatControlTxOctets The value of tmnxL2tpTgStatControlTxOctets indicates the accumulated number of control channel octets that were transmitted to the current tunnel endpoints in this tunnel group.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.17
tmnxL2tpTgStatControlTxOctetsLw The value of tmnxL2tpTgStatControlTxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTgStatControlTxOctets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.18
tmnxL2tpTgStatControlTxOctetsHw The value of tmnxL2tpTgStatControlTxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTgStatControlTxOctets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.19
tmnxL2tpTgStatControlTxPkts The value of tmnxL2tpTgStatControlTxPkts indicates the accumulated number of control packets that were transmitted to the current tunnel endpoints in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.20
tmnxL2tpTgStatErrorTxPkts The value of tmnxL2tpTgStatErrorTxPkts indicates the accumulated number of packet transmission errors on the current tunnels in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.21
tmnxL2tpTgStatErrorRxPkts The value of tmnxL2tpTgStatErrorRxPkts indicates the accumulated number of errored packets that were received on the current tunnels in this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.22
tmnxL2tpTgStatSessionLimit The value of tmnxL2tpTgStatSessionLimit indicates the configured session limit of this tunnel group.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.23
tmnxL2tpTgStatSeAssignMethod The value of the object tmnxL2tpTgStatSeAssignMethod indicates the latest actual method used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. Note that the next tun…	TmnxL2tpSessionAssignMethod Type Values: 0 default 1 existingFirst 2 weighted 3 weightedRandom	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.24
tmnxL2tpTgStatOperSessionLimit The value of tmnxL2tpTgStatOperSessionLimit indicates the operational session limit of this tunnel group.	TmnxL2tpSessionLimit Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.1.1.25

The tmnxL2tpTgTuTable contains the set of active tunnels for each L2TP
Tunnel Group.

tmnxL2tpTgTuEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.2.2.1

Each row entry contains a tunnel identifier of a L2TP tunnel group.

Rows are created or removed automatically by the system.

Indexes

TIMETRA-VRTR-MIBvRtrID tmnxL2tpTgStatName tmnxL2tpTgTuId

Column	Syntax	OID
tmnxL2tpTgTuId The value of the object tmnxL2tpTgTuId indicates the local identifier of a Layer Two Tunneling Protocol Tunnel. In L2TP version 2, it is the 16-bit tunnel ID. In L2TP version 3, it is equal…	TmnxL2tpConnectionId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.2.2.2.1.1

The tmnxL2tpTgDrainTable has an entry for each active Layer Two
Tunneling Protocol Tunnel Group.

tmnxL2tpTgDrainEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.2.3.1.1

Each conceptual row presents an operations interface to drain a Layer
Two Tunneling Protocol Tunnel Group.

After a successful drain operation, the value of the object
tmnxL2tpTgStatState of this tunnel grou…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTgDrain Setting this object to 'drain (0)' triggers an attempt to drain this L2TP tunnel group. Setting it to 'stopDrain (1)' stops the draining. Reading this object returns the value 'notApplicabl…	TmnxL2tpActionTypeDrainr/w Type Values: 0 drain 1 stopDrain 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.60.1.2.3.1.1.1

The L2TP Tunnel configuration table contains objects to configure L2TP
Tunnels.

tmnxL2tpTuCfgEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1

Each conceptual row represents a Layer Two Tunneling Protocol Tunnel.

Entries in this table can be created or deleted via SNMP operations.

Indexes

TIMETRA-VRTR-MIBvRtrID tmnxL2tpTgCfgName tmnxL2tpTuCfgName

Column	Syntax	OID
tmnxL2tpTuCfgName The value of the object tmnxL2tpTuCfgName specifies the name of this Layer Two Tunneling Protocol Tunnel.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.1
tmnxL2tpTuCfgRowStatus The value of tmnxL2tpTuCfgRowStatus specifies the row status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.2
tmnxL2tpTuCfgLastMgmtChange The value of tmnxL2tpTuCfgLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.3
tmnxL2tpTuCfgDescription The value of tmnxL2tpTuCfgDescription specifies the description of this Layer Two Tunneling Protocol Tunnel.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.4
tmnxL2tpTuCfgAdminState The value of tmnxL2tpTuCfgAdminState specifies the administrative state of this Layer Two Tunneling Protocol Tunnel.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.5
tmnxL2tpTuCfgPreference The value of tmnxL2tpTuCfgPreference specifies the preference of this Layer Two Tunneling Protocol Tunnel. The value '0' corresponds to the highest preference.	TmnxL2tpTunnelPreferencer/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.6
tmnxL2tpTuCfgPeerAddrType The value of tmnxL2tpTuCfgPeerAddrType specifies the address type of tmnxL2tpTuCfgPeerAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.7
tmnxL2tpTuCfgPeerAddr The value of tmnxL2tpTuCfgPeerAddr specifies the IP address of the peer.	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.8
tmnxL2tpTuCfgAddrType The value of tmnxL2tpTuCfgAddrType specifies the address type of tmnxL2tpTuCfgAddr. The value 'unknown' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgAddrType.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.9
tmnxL2tpTuCfgAddr The value of tmnxL2tpTuCfgAddr specifies the local IP address of this Layer Two Tunneling Protocol Tunnel. The value ''H specifies that the value must be set to the actual value of the object tmnxL2tpTgCf…	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.10
tmnxL2tpTuCfgLocalName The value of the object tmnxL2tpTuCfgLocalName specifies the host name used by this system during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Cl…	TmnxL2tpHostNameOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.11
tmnxL2tpTuCfgRemoteName The value of the object tmnxL2tpTuCfgRemoteName specifies a string to be compared to the host name used by the tunnel peer during the authentication phase of tunnel establishment. This object is related t…	TmnxL2tpHostNameOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.12
tmnxL2tpTuCfgSecret The value of the object tmnxL2tpTuCfgSecret specifies the password to be used for the authentication of this Layer Two Tunneling Protocol Tunnel. This value overrules the value of the object tmnxL2tpTgCfg…	TmnxL2tpAuthSecretr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.13
tmnxL2tpTuCfgHelloInterval The value of tmnxL2tpTuCfgHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. A value…	secondsTmnxL2tpTunnelHelloIntervalr/w Type Constraints: range: -2..-1 range: 10..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.14
tmnxL2tpTuCfgIdleTO The value of tmnxL2tpTuCfgIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. …	secondsTmnxL2tpTunnelIdleTOr/w Type Constraints: range: -2..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.15
tmnxL2tpTuCfgDestructTO The value of tmnxL2tpTuCfgDestructTO specifies the period of time that data of a disconnected tunnel will persist before being removed. A value of '-2' specifies that the value must be set to the actual v…	secondsTmnxL2tpTunnelDestructTOr/w Type Constraints: range: -2 range: 60..86400	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.16
tmnxL2tpTuCfgMaxRetxEstab The value of tmnxL2tpTuCfgMaxRetxEstab specifies the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is established, before its control connection goes down.	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.17
tmnxL2tpTuCfgMaxRetxNotEstab The value of tmnxL2tpTuCfgMaxRetxNotEstab specifies the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is unestablished, before its control connection goes down.	TmnxL2tpTunnelMaxRetxr/w Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.18
tmnxL2tpTuCfgSessionLimit The value of tmnxL2tpTuCfgSessionLimit specifies the maximum number of sessions allowed in this Layer Two Tunneling Protocol Tunnel. The number of sessions allowed for a tunnel is currently limited to 655…	TmnxL2tpSessionLimitr/w Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.19
tmnxL2tpTuCfgAvpHiding The value of tmnxL2tpTuCfgAvpHiding specifies when the H bit in the header of each Attribute Value Pair (AVP) is set for the L2TP control messages related to this Layer Two Tunneling Protocol Tunnel. The …	TmnxL2tpAvpHidingModer/w Type Values: 1 default 2 never 3 sensitive 4 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.20
tmnxL2tpTuCfgAutoEstab The value of tmnxL2tpTuCfgAutoEstab specifies if this Layer Two Tunneling Protocol Tunnel is to be set up automatically by the system.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.21
tmnxL2tpTuCfgDoChallenge The value of tmnxL2tpTuCfgDoChallenge specifies when challenge-response is to be used for the authentication of this Layer Two Tunneling Protocol Tunnel. The value 'default' specifies that the value must …	TmnxL2tpDoChallenger/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.22
tmnxL2tpTuCfgReceiveWindowSize The value of tmnxL2tpTuCfgReceiveWindowSize specifies the Receive Window Size for this Layer Two Tunneling Protocol Tunnel. The value zero specifies that the value must be set to the actual value of the o…	TmnxL2tpReceiveWindowSizer/w Type Constraints: range: 0 range: 4..1024	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.23
tmnxL2tpTuCfgIsaGrpId The value of tmnxL2tpTuCfgIsaGrpId specifies the L2TP Integrated Service Adaptor group of this Layer Two Tunneling Protocol Tunnel. The value zero specifies that the value must be set to the actual value …	TmnxL2tpIsaGrpIdOrZeror/w Type Constraints: range: 0..4	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.24
tmnxL2tpTuCfgLoadBalanceMethod The value of the object tmnxL2tpTuCfgLoadBalanceMethod specifies the method to be used for load-balancing sessions across ISA MDA in this Layer Two Tunneling Protocol Tunnel. The value 'default' specifies…	TmnxL2tpIsaMdaLoadBalanceMethodr/w Type Values: 0 default 1 perSession 2 perTunnel	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.30
tmnxL2tpTuCfgAccountingPolicy The value of the object tmnxL2tpTuCfgAccountingPolicy specifies the RADIUS accounting policy to be used in this Layer Two Tunneling Protocol Tunnel. It refers to a conceptual row in the tmnxL2tpApTable. …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.2.1.31

The L2TP Tunnel configuration table contains objects to configure PPP
(Point to Point Protocol) on L2TP LNS Tunnels.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpLnsTuPppEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1

Each conceptual row represents PPP information about a Layer Two
Tunneling Protocol LNS Tunnel configuration.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpLnsTuPppLastMgmtChange The value of tmnxL2tpLnsTuPppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.1
tmnxL2tpLnsTuPppAuthPlcy The value of the object tmnxL2tpLnsTuPppAuthPlcy specifies the authentication policy used by this system during the authentication phase of session establishment. An empty string specifies that the actual…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.2
tmnxL2tpLnsTuPppAuthProtocol The value of tmnxL2tpLnsTuPppAuthProtocol specifies what PPP authentication protocol(s) will be negotiated during the LCP phase for the sessions of this tunnel. The value zero specifies that the actual va…	TmnxL2tpPppAuthenticationr/w Type Values: 0 default 1 pap 2 chap 3 prefChap 4 prefPap	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.3
tmnxL2tpLnsTuPppUserDb The value of the object tmnxL2tpLnsTuPppUserDb specifies the local user database to use for PADI or PPP PAP/CHAP based authentication during the authentication phase of session establishment. An empty str…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.4
tmnxL2tpLnsTuPppDefaultService The value of tmnxL2tpLnsTuPppDefaultService specifies the service ID of the service where the PPP sessions are established when the authentication server does not specify the service ID. The value zero sp…	TIMETRA-TC-MIBTmnxServIdr/w Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.5
tmnxL2tpLnsTuPppDefaultGroupIf The value of tmnxL2tpLnsTuPppDefaultGroupIf specifies the group interface where the PPP sessions are established when the authentication server does not specify the group interface. The empty string speci…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.6
tmnxL2tpLnsTuPppProxyLcp The value of tmnxL2tpLnsTuPppProxyLcp specifies if this system reuses the result of the Link Control Protocol (LCP) negotiation done by the proxy (LAC). If the value of this object is 'always', the Proxy …	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.7
tmnxL2tpLnsTuPppProxyAuth The value of tmnxL2tpLnsTuPppProxyAuth specifies if this system reuses the authentication done by the proxy (LAC). If the value of this object is 'always', the Authentication AVPs received from the LAC ar…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.8
tmnxL2tpLnsTuPppMtu The value of tmnxL2tpLnsTuPppMtu specifies the MTU (Maximum Transmission Unit) for this tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppMtu.	TmnxL2tpPppMtur/w Type Constraints: range: 0 range: 512..9212	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.9
tmnxL2tpLnsTuPppLcpKaInterval The value of tmnxL2tpLnsTuPppLcpKaInterval specifies the time interval in seconds at which LCP echo requests are transmitted for this tunnel. The value zero specifies that the actual value must be used of…	secondsTmnxL2tpLcpKaIntervalr/w Type Constraints: range: 0 range: 10..300	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.10
tmnxL2tpLnsTuPppLcpKaHoldUp The value of tmnxL2tpLnsTuPppLcpKaHoldUp specifies how many LCP keepalive messages can be missed before the related session is brought down. The value zero specifies that the actual value must be used of …	TmnxL2tpLcpKaHoldUpMplierr/w Type Constraints: range: 0..5	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.11
tmnxL2tpLnsTuPppIpcpSubnetNeg The value of tmnxL2tpLnsTuPppIpcpSubnetNeg specifies if IPCP subnet negotiation is enabled.	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.13
tmnxL2tpLnsTuPppLcpIgnoreMagic The value of tmnxL2tpLnsTuPppLcpIgnoreMagic specifies if checking the Magic-Number field in LCP Echo-Request and Echo-Reply messages is skipped. If the value of tmnxL2tpLnsTuPppLcpIgnoreMagic is equal to …	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.14
tmnxL2tpLnsTuPppMinChapChall The value of tmnxL2tpLnsTuPppMinChapChall specifies the minimum length of the CHAP challenge generated by the system. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsT…	Unsigned32r/w Constraints: range: 0-0 range: 8-64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.15
tmnxL2tpLnsTuPppMaxChapChall The value of tmnxL2tpLnsTuPppMaxChapChall specifies the maximum length of the CHAP challenge generated by the system. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsT…	Unsigned32r/w Constraints: range: 0-0 range: 8-64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.16
tmnxL2tpLnsTuPppLcpForceAckAccm The value of tmnxL2tpLnsTuPppLcpForceAckAccm specifies if this system acknowledges the LCP Asynchronous Control Character Map (ACCM) configuration option during the LCP negotiation phase; in this case, though the system…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.17
tmnxL2tpLnsTuPppDefaultSvcName The value of tmnxL2tpLnsTuPppDefaultSvcName specifies the name of the service where the PPP sessions are established when the authentication server does not specify the service ID. An empty string specifi…	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.18
tmnxL2tpLnsTuPppRejDisabledNcp The value of tmnxL2tpLnsTuPppRejDisabledNcp specifies whether disabled NCP's (Network Control protocol) are rejected or silently ignored. When the value of this object is set to 'always(3)' then disabled…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.3.1.19

The L2TP Tunnel configuration table contains objects to configure
MLPPP on L2TP Tunnels.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpTuMlpppEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1

Each conceptual row represents MLPPP information about a Layer Two
Tunneling Protocol LNS Tunnel configuration.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTuMlpppLastMgmtChange The value of tmnxL2tpTuMlpppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.1
tmnxL2tpTuMlpppAdminState The value of tmnxL2tpTuMlpppAdminState specifies the administrative state of MLPPP for this Layer Two Tunneling Protocol Tunnel. The value 'noop' specifies that the actual value must be used of the object…	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.2
tmnxL2tpTuMlpppMaxLinks The value of the object tmnxL2tpTuMlpppMaxLinks specifies the maximum number of MLPPP links. The value of this object is only relevant for tunnels where this system performs the LNS role. T…	Unsigned32r/w Constraints: range: 0-8	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.3
tmnxL2tpTuMlpppInterleave The value of tmnxL2tpTuMlpppInterleave specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.4
tmnxL2tpTuMlpppMaxFragDelay The value of tmnxL2tpTuMlpppMaxFragDelay specifies the maximum delay of fragments for this L2TP Tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpTgMlpppMaxFragDela…	millisecondsTmnxL2tpMlpppMaxFragDelayr/w Type Constraints: range: 0 range: 5..1000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.5
tmnxL2tpTuMlpppReassemblyTo The value of tmnxL2tpTuMlpppReassemblyTo specifies the reassembly timeout for fragments for this L2TP Tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpTgMlpppReass…	millisecondsTmnxL2tpMlpppReassemblyTimeoutr/w Type Constraints: range: 0 range: 100 range: 1000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.6
tmnxL2tpTuMlpppShortSeqNumberRx The value of tmnxL2tpTuMlpppShortSeqNumberRx specifies if this system requests to receive short sequence numbers from the peer. If the value of this object is 'always', this system includes the Short Sequ…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.7
tmnxL2tpTuMlpppEpClass The value of tmnxL2tpTuMlpppEpClass specifies the type of endpoint. If the value of 'tmnxL2tpTuMlpppEpClass' is equal to 'ipv4Address', the address for the MLPPP Endpoint Discriminator Option is taken fro…	TmnxL2tpMlpppEndpointClassr/w Type Values: 0 default 2 ipv4Address 3 macAddress	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.8
tmnxL2tpTuMlpppEpIpv4Address The value of tmnxL2tpTuMlpppEpIpv4Address specifies the class 2 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTuMlpppEpClass is equal to 'ipv4Address', a value of a…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.9
tmnxL2tpTuMlpppEpMacAddress The value of tmnxL2tpTuMlpppEpMacAddress specifies the class 3 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTuMlpppEpClass is equal to 'macAddress', a value of all…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.4.1.10

The L2TP Tunnel configuration table contains more objects to configure
L2TP Tunnels.
          
Entries in this table are automatically created and deleted by the
system.

tmnxL2tpTuXtEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.5.1

Each conceptual row represents MLPPP information about a Layer Two
Tunneling Protocol Tunnel configuration.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTuXtLastMgmtChange The value of tmnxL2tpTuXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.5.1.1
tmnxL2tpTuXtDfBitLac The value of tmnxL2tpTuXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS using this tunnel. If the value of this object…	TmnxAlwaysNeverOrDefaultr/w Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.5.1.2
tmnxL2tpTuXtFoRecoveryMethod The value of the object tmnxL2tpTuXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP this tunnel and its sessions between this system (performing the LAC role) and its…	TmnxL2tpFailoverRecoveryMethodr/w Type Values: 0 default 1 mcs 2 recoveryTunnel	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.5.1.3
tmnxL2tpTuXtFoRecoveryTime The value of the object tmnxL2tpTuXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. A value of '-2' speci…	TmnxL2tpFailoverRecoveryTimer/w Type Constraints: range: -2 range: 0..900	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.5.1.4

The tmnxL2tpTuL2tpV3Table contains objects used to configure instances
of the L2TPv3 tunnel entries.
          
Entries in this table are automatically created and destroyed via SNMP
SET operations to tmnxL2tpTuCfgRowStatus.

tmnxL2tpTuL2tpV3Entry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.1.6.1

Each tmnxL2tpTuL2tpV3Entry contains the configuration of one L2TPv3
tunnel entry.

Conceptual rows that correspond to V2 Tunnels are immutable.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxL2tpTuL2tpV3LastChange The value of tmnxL2tpTuL2tpV3LastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local netwo…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.6.1.1
tmnxL2tpTuL2tpV3PubTcpMssAdjust The value of tmnxL2tpTuL2tpV3PubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the public network to the private network. The system may use t…	octetsInteger32r/w Constraints: range: -2--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.6.1.2
tmnxL2tpTuL2tpV3PrivTcpMssAdjust The value of tmnxL2tpTuL2tpV3PrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the private network to the public network. The system may use …	octetsInteger32r/w Constraints: range: -2--1 range: 512-9000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.1.6.1.3

The tmnxL2tpTuStatusTable has an entry for each Layer Two Tunneling
Protocol Tunnel.

tmnxL2tpTuStatusEntry row .1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1

Each conceptual row represents a Layer Two Tunneling Protocol Tunnel.

Entries in this table are created and destroyed by the system.

Indexes

TIMETRA-VRTR-MIBvRtrID tmnxL2tpTuStatusId

Column	Syntax	OID
tmnxL2tpTuStatusId The value of the object tmnxL2tpTuStatusId indicates the local identifier of this Layer Two Tunneling Protocol Tunnel. In L2TP version 2, it contains the 16-bit tunnel ID in the high-order bits. …	TmnxL2tpConnectionId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.1
tmnxL2tpTuStatusState The value of tmnxL2tpTuStatusState indicates the operational state of this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpTuOperState Type Values: 1 unknown 2 idle 3 waitReply 4 waitConn 5 establishedIdle 6 established 7 draining 8 drained 9 closed 10 closedByPeer	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.2
tmnxL2tpTuStatusTunnelId The value of the object tmnxL2tpTuStatusTunnelId indicates the local identifier of this Layer Two Tunneling Protocol Tunnel, when L2TP version 2 is used. In L2TP version 3, it is equal to the most signifi…	TmnxL2tpTunnelId Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.3
tmnxL2tpTuStatusPreference The value of tmnxL2tpTuStatusPreference indicates the preference of this Layer Two Tunneling Protocol Tunnel. The value '0' corresponds to the highest preference.	TmnxL2tpTunnelPreference Type Constraints: range: 0..16777215	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.4
tmnxL2tpTuStatusPeerAddrType The value of tmnxL2tpTuStatusPeerAddrType indicates the address type of tmnxL2tpTuStatusPeerAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.5
tmnxL2tpTuStatusPeerAddr The value of tmnxL2tpTuStatusPeerAddr indicates the IP address of the peer.	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.6
tmnxL2tpTuStatusAddrType The value of tmnxL2tpTuStatusAddrType indicates the address type of tmnxL2tpTuStatusAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.7
tmnxL2tpTuStatusAddr The value of tmnxL2tpTuStatusAddr indicates the local IP address of this Layer Two Tunneling Protocol Tunnel.	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.8
tmnxL2tpTuStatusLocalName The value of the object tmnxL2tpTuStatusLocalName indicates the host name used by this system during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel…	TmnxL2tpHostNameOrEmpty Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.9
tmnxL2tpTuStatusRemoteName The value of the object tmnxL2tpTuStatusRemoteName indicates a string that is compared to the host name used by the tunnel peer during the authentication phase of tunnel establishment. This object is rela…	TmnxL2tpHostNameOrEmpty Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.10
tmnxL2tpTuStatusAssignmentId The value of the object tmnxL2tpTuStatusAssignmentId indicates a string that distinguishes this Layer Two Tunneling Protocol Tunnel. This object is related to the RADIUS attribute Tunnel-Assignment-ID. …	TmnxL2tpTunnelNameOrEmpty Type Constraints: range: 0..63	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.11
tmnxL2tpTuStatusHelloInterval The value of tmnxL2tpTuStatusHelloInterval indicates the time interval between two consecutive tunnel Hello messages. A value of '-1' indicates that the keepalive function is disabled.	secondsTmnxL2tpTunnelHelloInterval Type Constraints: range: -2..-1 range: 10..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.13
tmnxL2tpTuStatusIdleTO The value of tmnxL2tpTuStatusIdleTO indicates the period of time that this Layer Two Tunneling Protocol Tunnel will persist while it has no active sessions before being disconnected. A value of -1 indicat…	secondsTmnxL2tpTunnelIdleTO Type Constraints: range: -2..3600	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.14
tmnxL2tpTuStatusDestructTO The value of tmnxL2tpTuStatusDestructTO indicates the period of time that data of this Layer Two Tunneling Protocol Tunnel will persist after it is disconnected.	secondsTmnxL2tpTunnelDestructTO Type Constraints: range: -2 range: 60..86400	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.15
tmnxL2tpTuStatusMaxRetxEstab The value of tmnxL2tpTuStatusMaxRetxEstab indicates the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is established, before its control connection goes down.	TmnxL2tpTunnelMaxRetx Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.16
tmnxL2tpTuStatusMaxRetxNotEstab The value of tmnxL2tpTuStatusMaxRetxNotEstab indicates the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is unestablished, before its control connection goes down.	TmnxL2tpTunnelMaxRetx Type Constraints: range: -2 range: 2..7	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.17
tmnxL2tpTuStatusSessionLimit The value of tmnxL2tpTuStatusSessionLimit indicates the configured number of sessions allowed in this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpSessionLimit Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.18
tmnxL2tpTuStatusAvpHiding The value of tmnxL2tpTuStatusAvpHiding indicates when the H bit in the header of each Attribute Value Pair (AVP) is set for the L2TP control messages related to this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpAvpHidingMode Type Values: 1 default 2 never 3 sensitive 4 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.19
tmnxL2tpTuStatusGroupName The value of tmnxL2tpTuStatusGroupName indicates the name of the tunnel group where this Layer Two Tunneling Protocol Tunnel belongs to.	TIMETRA-TC-MIBTmnxL2tpTunnelGroupNameOrEmpty Type Constraints: range: 0..63	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.20
tmnxL2tpTuStatusRemoteTunnelId The value of the object tmnxL2tpTuStatusRemoteTunnelId indicates the identifier of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer, when L2TP version 2 is used. In L2TP version 3, it is e…	TmnxL2tpTunnelId Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.21
tmnxL2tpTuStatusRemoteConnId The value of the object tmnxL2tpTuStatusRemoteConnId indicates the identifier of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer.	TmnxL2tpConnectionId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.22
tmnxL2tpTuStatusTransportType The value of the object tmnxL2tpTuStatusTransportType indicates the transport type used for the messages of this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpTransportType Type Values: 0 unknown 1 udpIp 2 ip	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.23
tmnxL2tpTuStatusUdpPort The value of tmnxL2tpTuStatusUdpPort indicates the local UDP port of this Layer Two Tunneling Protocol Tunnel.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.24
tmnxL2tpTuStatusRemoteUdpPort The value of the object tmnxL2tpTuStatusRemoteUdpPort indicates the UDP port of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.25
tmnxL2tpTuStatusStartTime The value of the object tmnxL2tpTuStatusStartTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered either the state 'waitReply' or 'waitConn'.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.26
tmnxL2tpTuStatusEstabTime The value of the object tmnxL2tpTuStatusEstabTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered the state 'established'. The value zero means that this tunnel has …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.27
tmnxL2tpTuStatusIdleTime The value of the object tmnxL2tpTuStatusIdleTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered the state 'idle'. The value zero means that this tunnel has not beco…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.28
tmnxL2tpTuStatusClosedTime The value of the object tmnxL2tpTuStatusClosedTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered one of the closed states. The value zero means that this tunnel ha…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.29
tmnxL2tpTuStatusStopCcnResult The value of tmnxL2tpTuStatusStopCcnResult indicates the result of a StopCCN (Stop-Control-Connection-Notification) message related to this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpStopCcnResult Type Values: 0 noError 1 generalReq 2 generalErr 3 alreadyExists 4 reqNotAuth 5 version 6 reqShutDown 7 fsmError	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.30
tmnxL2tpTuStatusGeneralError The value of tmnxL2tpTuStatusGeneralError indicates an general error related to this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpGeneralError Type Values: 0 noError 1 noControl 2 wrongLength 3 fieldOutOfRange 4 insufficientRes 5 sessionIdInvalid 6 vendorSpecific 7 tryAnother 8 unknownMandatory 9 tryAnotherDirected	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.31
tmnxL2tpTuStatusErrorMessage The value of the object tmnxL2tpTuStatusErrorMessage indicates describes an error related to this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpErrorMessage Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.32
tmnxL2tpTuStatusDoChallenge The value of tmnxL2tpTuStatusDoChallenge indicates when challenge-response is used for the authentication of this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpDoChallenge Type Values: 1 default 2 never 3 always	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.33
tmnxL2tpTuStatusRws The value of tmnxL2tpTuStatusRws indicates the actual Receive Window Size of this Layer Two Tunneling Protocol Tunnel.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.34
tmnxL2tpTuStatusTxDestAddrType The value of tmnxL2tpTuStatusTxDestAddrType indicates the address type of tmnxL2tpTuStatusTxDestAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.35
tmnxL2tpTuStatusTxDestAddr The value of tmnxL2tpTuStatusTxDestAddr indicates the destination IP address used while transmitting L2TP control messages for this Layer Two Tunneling Protocol Tunnel. The destination address can be diff…	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.36
tmnxL2tpTuStatusRxSrcAddrType The value of tmnxL2tpTuStatusRxSrcAddrType indicates the address type of tmnxL2tpTuStatusRxSrcAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.37
tmnxL2tpTuStatusRxSrcAddr The value of tmnxL2tpTuStatusRxSrcAddr indicates the source IP address found in L2TP control messages received for this Layer Two Tunneling Protocol Tunnel. The source address can be different from the va…	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.38
tmnxL2tpTuStatusAccountingPolicy The value of tmnxL2tpTuStatusAccountingPolicy indicates the RADIUS accounting policy of this Layer Two Tunneling Protocol Tunnel.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.40
tmnxL2tpTuStatusSelBlacklstState The value of tmnxL2tpTuStatusSelBlacklstState indicates if this tunnel is deemed reachable or not. A value of 'notBlacklisted(0)' indicates the tunnel is not in the tunnel-selection-blacklist and is thus …	Enumeration Enumerated Values: 0 notBlacklisted 1 blacklisted 2 selectable	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.41
tmnxL2tpTuStatusSelBlacklstTime The value of tmnxL2tpTuStatusSelBlacklstTime indicates when the tunnel was put in the tunnel-selection-blacklist. If the tunnel is currently not in the tunnel-selection-blacklist, tmnxL2tpTuStatusSelBlack…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.42
tmnxL2tpTuStatSelBlacklstTimeRem The value of tmnxL2tpTuStatSelBlacklstTimeRem indicates the remaining time the tunnel will remain in the tunnel-selection-blacklist. If the tunnel is currently not in the tunnel-selection-blacklist, tmnxL…	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.43
tmnxL2tpTuStatusTxDestUdpPort The value of tmnxL2tpTuStatusTxDestUdpPort indicates the destination UDP port used while transmitting L2TP control messages for this Layer Two Tunneling Protocol Tunnel. The destination UDP port can be di…	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.44
tmnxL2tpTuStatusRxSrcUdpPort The value of tmnxL2tpTuStatusRxSrcUdpPort indicates the source UDP port found in L2TP control messages received for this Layer Two Tunneling Protocol Tunnel. The source UDP port can be different from the …	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.45
tmnxL2tpTuStatusDfBitLac The value of tmnxL2tpTuStatusDfBitLac indicates if this system, while performing the LAC role, sets the DF (Don't Fragment) bit in the IP header of the data traffic transmitted with this Layer Two Tunneling Protocol Tun…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.46
tmnxL2tpTuStatusProtocolVersion The value of the object tmnxL2tpTuStatusProtocolVersion indicates the L2TP protocol version for this Layer Two Tunneling Protocol tunnel.	TmnxL2tpProtocolVersion Type Values: 0 undefined 1 v2 2 v3 3 v3draft	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.47
tmnxL2tpTuStatusOperSessionLimit The value of tmnxL2tpTuStatusOperSessionLimit indicates the operational number of sessions allowed in this Layer Two Tunneling Protocol Tunnel.	TmnxL2tpSessionLimit Type Constraints: range: -2..-1 range: 1..250000	.1.3.6.1.4.1.6527.3.1.2.60.1.3.2.2.1.48