tSyncIfTimingAdmRef1NationalUse
TIMETRA-CHASSIS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.21
Object
column
obsolete
r/w
Unsigned32
The value of tSyncIfTimingAdmRef1NationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsoleted in release 20.5.
Context
- MIB
- TIMETRA-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.21- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- tSyncIfTimingAdmEntry
- Table
- tSyncIfTimingAdmTable
- Siblings
- 37
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 4-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSyncIfTimingAdmRevert The value of tSyncIfTimingAdmRevert specifies whether the reference
source will revert to a higher priority source that has been
re-validated or newly validated.
Th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.1 |
| tSyncIfTimingAdmBITSIfType The value of tSyncIfTimingAdmBITSIfType specifies the interface type
of the BITS (Building Integrated Timing Supply) timing reference. | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.10 |
| tSyncIfTimingAdmBITSAdminStatus The value of tSyncIfTimingAdmBITSAdminStatus specifies the desired
administrative status of the BITS (Building Integrated Timing Supply)
input timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.11 |
| tSyncIfTimingAdmRef1SrcHw obsolete The value of tSyncIfTimingAdmRef1SrcHw specifies the source HW Index
of the first timing reference if the source is not a port.
This can only be set to a valid HW I… | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.12 |
| tSyncIfTimingAdmRef1BITSIfType obsolete The value of tSyncIfTimingAdmRef1BITSIfType specifies the interface
type of the first timing reference if the source is BITS.
This can only be changed if the value … | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.13 |
| tSyncIfTimingAdmRef2SrcHw obsolete The value of tSyncIfTimingAdmRef2SrcHw specifies the source HW Index
of the second timing reference if the source is not a port.
This can only be set to a valid HW … | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.14 |
| tSyncIfTimingAdmRef2BITSIfType obsolete The value of tSyncIfTimingAdmRef2BITSIfType specifies the interface
type of the second timing reference if the source is BITS.
This can only be changed if the value… | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.15 |
| tSyncIfTimingAdmBITSOutAdmStatus The value of tSyncIfTimingAdmBITSOutAdmStatus specifies administrative
status of the BITS (Building Integrated Timing Supply) output timing
reference.
In an XRS-40 … | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.16 |
| tSyncIfTimingAdmBITSOutLineLen tSyncIfTimingAdmBITSOutLineLen specifies the length of the line
(in feet) for the BITS (Building Integrated Timing Supply) output.
The following values are valid:
lengthNotApp… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.17 |
| tSyncIfTimingAdmRef1CfgQltyLevel The value of tSyncIfTimingAdmRef1CfgQltyLevel specifies the configured
Quality Level of Reference 1. A value of 'unknown (0)' indicates
Reference 1 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.18 |
| tSyncIfTimingAdmRef2CfgQltyLevel The value of tSyncIfTimingAdmRef2CfgQltyLevel specifies the configured
Quality Level of Reference 2. A value of 'unknown (0)' indicates
Reference 2 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.19 |
| tSyncIfTimingAdmRefOrder1 The value of tSyncIfTimingAdmRefOrder1 specifies the most preferred
timing reference source.
The synchronous equipment timing subsystem chooses a timing reference
b… | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.2 |
| tSyncIfTimingAdmBITSCfgQltyLevel The value of tSyncIfTimingAdmBITSCfgQltyLevel specifies the configured
Quality Level of the BITS interface. A value of 'unknown (0)'
indicates the BITS interface is not forced to … | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.20 |
| tSyncIfTimingAdmRef2NationalUse obsolete The value of tSyncIfTimingAdmRef2NationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsolete… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.22 |
| tSyncIfTimingAdmBITSNationalUse The value of tSyncIfTimingAdmBITSNationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.23 |
| tSyncIfTimingAdmQLSelection The value of tSyncIfTimingAdmQLSelection specifies whether or not the
timing reference selection process uses the quality level of each
timing reference when making the decision o… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.24 |
| tSyncIfTimingAdmRefOrder4 The value of tSyncIfTimingAdmRefOrder4 specifies the fourth most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.25 |
| tSyncIfTimingAdmPTPAdminStatus The value of tSyncIfTimingAdmPTPAdminStatus specifies the desired
administrative status of the Precision Timing Protocol (PTP) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.26 |
| tSyncIfTimingAdmPTPCfgQltyLevel The value of tSyncIfTimingAdmPTPCfgQltyLevel specifies the configured
Quality Level of the Precision Timing Protocol (PTP). A value of
'unknown (0)' specifies PTP is not forced to… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.27 |
| tSyncIfTimingAdmBITSOutSource The value of tSyncIfTimingAdmBITSOutSource specifies the source of the
BITS (Building Integrated Timing Supply) output.
In an XRS-40 system, the extension chassis i… | column | TmnxBITSOutSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.28 |
| tSyncIfTimingAdmBITSOutQlMin The value of tSyncIfTimingAdmBITSOutQlMin specifies the minimum
quality level that a signal must have for it to be selected for BITS
output. This can be used to ensure that the si… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.29 |
| tSyncIfTimingAdmRefOrder2 The value of tSyncIfTimingAdmRefOrder2 specifies the second most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.3 |
| tSyncIfTimingAdmBITSOutSquelch The value of tSyncIfTimingAdmBITSOutSquelch specifies whether or not
to squelch the output signal. This object is only valid when there is
no valid reference selected.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.30 |
| tSyncIfTimingAdmQlMin The value of tSyncIfTimingAdmQlMin specifies the minimum acceptable
quality level that a signal must have for it to be considered for
selection by the system timing module.
… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.32 |
| tSyncIfTimingAdmWaitToRestorTime The value of tSyncIfTimingAdmWaitToRestorTime specifies the time, in
minutes, that a previously failed input reference must be valid before
it will be used for either the BITS out… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.33 |
| tSyncIfTimingAdmChangedMask The value of tSyncIfTimingAdmChangedMask indicates a bitmask of which
synchronous interface timing objects have been set, but not committed.
The agent sets these bi… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.34 |
| tSyncIfTimingAdmSyncECfgQltyLevl The value of tSyncIfTimingAdmSyncECfgQltyLevl specifies the configured
Quality Level of the Synchronous Ethernet (SyncE) timing reference. A
value of 'unknown (0)' specifies SyncE… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.35 |
| tSyncIfTimingAdmSyncEAdminStatus The value of tSyncIfTimingAdmSyncEAdminStatus specifies the desired
administrative status of the Synchronous Ethernet (SyncE) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.36 |
| tSyncIfTimingAdmRefOrder5 The value of tSyncIfTimingAdmRefOrder5 specifies the fifth most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.37 |
| tSyncIfTimingAdmGnssCfgQltyLevel The value of tSyncIfTimingAdmGnssCfgQltyLevel specifies the configured
Quality Level of the GNSS (Global Navigation Satellite System) timing
reference. A value of 'unknown (0)' sp… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.38 |
| tSyncIfTimingAdmGnssAdminStatus The value of tSyncIfTimingAdmGnssAdminStatus specifies the desired
administrative status of the GNSS (Global Navigation Satellite System)
timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.39 |
| tSyncIfTimingAdmRef1SrcPort The value of tSyncIfTimingAdmRef1SrcPort specifies the source port of
the first timing reference. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.4 |
| tSyncIfTimingAdmRef1AdminStatus The value of tSyncIfTimingAdmRef1AdminStatus specifies the desired
administrative status of the first timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.5 |
| tSyncIfTimingAdmRef2SrcPort The value of tSyncIfTimingAdmRef2SrcPort specifies the source port of
the second timing reference. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.6 |
| tSyncIfTimingAdmRef2AdminStatus The value of tSyncIfTimingAdmRef2AdminStatus specifies the desired
administrative status of the second timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.7 |
| tSyncIfTimingAdmChanged The value of tSyncIfTimingAdmChanged is a bitmask that indicates which
objects have been set, but not committed. bit values used here are:
0x0001: tSyncIfTiming… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.8 |
| tSyncIfTimingAdmRefOrder3 The value of tSyncIfTimingAdmRefOrder3 specifies the third most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.9 |