tSyncIfTimingAdmEntry
TIMETRA-CHASSIS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1
Object
row
Information about the synchronous interface timing. Entries are
created by user. Entries are deleted by user. Note that the first
Nokia SROS series product release does not support configuration of
synchronous timing equipment on the secondary CPM. All SNMP operations
with tmnxCpmCardSlotNum of the secondary CPM will be denied.
In an XRS-40 system, the configuration of synchronous timing equipment
on the extension chassis is not supported.
The 7x50 systems supports 3 timing references (reference1, reference2
and bits).
The 7710 system only supports 2 timing references (reference1 and
reference2). On 7710 system, references can be a source port
or a BITS input on a CES CMA. If the value of the reference source
port is a valid Port ID then the reference is a source port. If the
value of the source hardware is a valid HWIndex of a CES CMA then the
source is a BITS on the CES CMA.
The VSR system does not support synchronous interface timing.
Context
- MIB
- TIMETRA-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1- Type
- row
- Status
- current
- Parent
- tSyncIfTimingAdmTable
- Table
- tSyncIfTimingAdmTable
- Children
- 38
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tSyncIfTimingAdmRevert The value of tSyncIfTimingAdmRevert specifies whether the reference
source will revert to a higher priority source that has been
re-validated or newly validated.
Th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.1 |
| tSyncIfTimingAdmBITSIfType The value of tSyncIfTimingAdmBITSIfType specifies the interface type
of the BITS (Building Integrated Timing Supply) timing reference. | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.10 |
| tSyncIfTimingAdmBITSAdminStatus The value of tSyncIfTimingAdmBITSAdminStatus specifies the desired
administrative status of the BITS (Building Integrated Timing Supply)
input timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.11 |
| tSyncIfTimingAdmRef1SrcHw obsolete The value of tSyncIfTimingAdmRef1SrcHw specifies the source HW Index
of the first timing reference if the source is not a port.
This can only be set to a valid HW I… | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.12 |
| tSyncIfTimingAdmRef1BITSIfType obsolete The value of tSyncIfTimingAdmRef1BITSIfType specifies the interface
type of the first timing reference if the source is BITS.
This can only be changed if the value … | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.13 |
| tSyncIfTimingAdmRef2SrcHw obsolete The value of tSyncIfTimingAdmRef2SrcHw specifies the source HW Index
of the second timing reference if the source is not a port.
This can only be set to a valid HW … | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.14 |
| tSyncIfTimingAdmRef2BITSIfType obsolete The value of tSyncIfTimingAdmRef2BITSIfType specifies the interface
type of the second timing reference if the source is BITS.
This can only be changed if the value… | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.15 |
| tSyncIfTimingAdmBITSOutAdmStatus The value of tSyncIfTimingAdmBITSOutAdmStatus specifies administrative
status of the BITS (Building Integrated Timing Supply) output timing
reference.
In an XRS-40 … | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.16 |
| tSyncIfTimingAdmBITSOutLineLen tSyncIfTimingAdmBITSOutLineLen specifies the length of the line
(in feet) for the BITS (Building Integrated Timing Supply) output.
The following values are valid:
lengthNotApp… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.17 |
| tSyncIfTimingAdmRef1CfgQltyLevel The value of tSyncIfTimingAdmRef1CfgQltyLevel specifies the configured
Quality Level of Reference 1. A value of 'unknown (0)' indicates
Reference 1 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.18 |
| tSyncIfTimingAdmRef2CfgQltyLevel The value of tSyncIfTimingAdmRef2CfgQltyLevel specifies the configured
Quality Level of Reference 2. A value of 'unknown (0)' indicates
Reference 2 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.19 |
| tSyncIfTimingAdmRefOrder1 The value of tSyncIfTimingAdmRefOrder1 specifies the most preferred
timing reference source.
The synchronous equipment timing subsystem chooses a timing reference
b… | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.2 |
| tSyncIfTimingAdmBITSCfgQltyLevel The value of tSyncIfTimingAdmBITSCfgQltyLevel specifies the configured
Quality Level of the BITS interface. A value of 'unknown (0)'
indicates the BITS interface is not forced to … | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.20 |
| tSyncIfTimingAdmRef1NationalUse obsolete The value of tSyncIfTimingAdmRef1NationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsolete… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.21 |
| tSyncIfTimingAdmRef2NationalUse obsolete The value of tSyncIfTimingAdmRef2NationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsolete… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.22 |
| tSyncIfTimingAdmBITSNationalUse The value of tSyncIfTimingAdmBITSNationalUse specifies the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.23 |
| tSyncIfTimingAdmQLSelection The value of tSyncIfTimingAdmQLSelection specifies whether or not the
timing reference selection process uses the quality level of each
timing reference when making the decision o… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.24 |
| tSyncIfTimingAdmRefOrder4 The value of tSyncIfTimingAdmRefOrder4 specifies the fourth most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.25 |
| tSyncIfTimingAdmPTPAdminStatus The value of tSyncIfTimingAdmPTPAdminStatus specifies the desired
administrative status of the Precision Timing Protocol (PTP) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.26 |
| tSyncIfTimingAdmPTPCfgQltyLevel The value of tSyncIfTimingAdmPTPCfgQltyLevel specifies the configured
Quality Level of the Precision Timing Protocol (PTP). A value of
'unknown (0)' specifies PTP is not forced to… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.27 |
| tSyncIfTimingAdmBITSOutSource The value of tSyncIfTimingAdmBITSOutSource specifies the source of the
BITS (Building Integrated Timing Supply) output.
In an XRS-40 system, the extension chassis i… | column | TmnxBITSOutSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.28 |
| tSyncIfTimingAdmBITSOutQlMin The value of tSyncIfTimingAdmBITSOutQlMin specifies the minimum
quality level that a signal must have for it to be selected for BITS
output. This can be used to ensure that the si… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.29 |
| tSyncIfTimingAdmRefOrder2 The value of tSyncIfTimingAdmRefOrder2 specifies the second most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.3 |
| tSyncIfTimingAdmBITSOutSquelch The value of tSyncIfTimingAdmBITSOutSquelch specifies whether or not
to squelch the output signal. This object is only valid when there is
no valid reference selected.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.30 |
| tSyncIfTimingAdmQlMin The value of tSyncIfTimingAdmQlMin specifies the minimum acceptable
quality level that a signal must have for it to be considered for
selection by the system timing module.
… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.32 |
| tSyncIfTimingAdmWaitToRestorTime The value of tSyncIfTimingAdmWaitToRestorTime specifies the time, in
minutes, that a previously failed input reference must be valid before
it will be used for either the BITS out… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.33 |
| tSyncIfTimingAdmChangedMask The value of tSyncIfTimingAdmChangedMask indicates a bitmask of which
synchronous interface timing objects have been set, but not committed.
The agent sets these bi… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.34 |
| tSyncIfTimingAdmSyncECfgQltyLevl The value of tSyncIfTimingAdmSyncECfgQltyLevl specifies the configured
Quality Level of the Synchronous Ethernet (SyncE) timing reference. A
value of 'unknown (0)' specifies SyncE… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.35 |
| tSyncIfTimingAdmSyncEAdminStatus The value of tSyncIfTimingAdmSyncEAdminStatus specifies the desired
administrative status of the Synchronous Ethernet (SyncE) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.36 |
| tSyncIfTimingAdmRefOrder5 The value of tSyncIfTimingAdmRefOrder5 specifies the fifth most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.37 |
| tSyncIfTimingAdmGnssCfgQltyLevel The value of tSyncIfTimingAdmGnssCfgQltyLevel specifies the configured
Quality Level of the GNSS (Global Navigation Satellite System) timing
reference. A value of 'unknown (0)' sp… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.38 |
| tSyncIfTimingAdmGnssAdminStatus The value of tSyncIfTimingAdmGnssAdminStatus specifies the desired
administrative status of the GNSS (Global Navigation Satellite System)
timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.39 |
| tSyncIfTimingAdmRef1SrcPort The value of tSyncIfTimingAdmRef1SrcPort specifies the source port of
the first timing reference. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.4 |
| tSyncIfTimingAdmRef1AdminStatus The value of tSyncIfTimingAdmRef1AdminStatus specifies the desired
administrative status of the first timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.5 |
| tSyncIfTimingAdmRef2SrcPort The value of tSyncIfTimingAdmRef2SrcPort specifies the source port of
the second timing reference. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.6 |
| tSyncIfTimingAdmRef2AdminStatus The value of tSyncIfTimingAdmRef2AdminStatus specifies the desired
administrative status of the second timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.7 |
| tSyncIfTimingAdmChanged The value of tSyncIfTimingAdmChanged is a bitmask that indicates which
objects have been set, but not committed. bit values used here are:
0x0001: tSyncIfTiming… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.8 |
| tSyncIfTimingAdmRefOrder3 The value of tSyncIfTimingAdmRefOrder3 specifies the third most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxChassisIndex The value of tmnxChassisIndex specifies a system identifier. The value
of this object cannot be changed. The only supported value is '1'.
Different values of TmnxPh… | column | TmnxChassisIndex | .1.3.6.1.4.1.6527.3.1.2.2.1.3.1.1 |
| tmnxCpmCardSlotNum The unique value which identifies this slot within a chassis in
the system. Depending upon the value of tmnxChassisType, this may
represent a fabric slot or a regular card slot. … | column | TmnxSlotNum | .1.3.6.1.4.1.6527.3.1.2.2.3.4.1.1 |
| tmnxCpmCardNum The unique value which identifies this CPM module within a specific
card slot within a chassis in the system. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.3.4.1.2 |