swDevInfoFrontPanelLedStatus

This object is a set of system LED indications. The first three 
octets is defined as system LED. The first LED is primary power
LED. The second LED is redundant power LED. The third LED is 
console LED. The other octets following the second octets are 
the logical port LED (following dot1dBasePort ordering). Every 
two bytes are presented to a port. The first byte is presentd to
the Link/Activity LED. The second byte is presented to the Speed
LED.
            
Link/Activity LED :
 The most significant bit is used for blink/solid:
    8 = The LED blinks.
              
 The second significant bit is used for link status:
 	1 = link fail.
 	2 = link pass.
          
		Speed LED :
 	01 = 10Mbps.
 	02 = 100Mbps.
 	03 = 1000Mbps.
          
The four remaining bits are currently unused and must be 0.

MIB

SWL2MGMT-MIB

OID

.1.3.6.1.4.1.2272.1.201.1.2.1.1.5

Type

scalar

Access

readonly

Status

current

Parent

swL2DevInfo