SWL2MGMT-MIB Table View

A table that contains information about every port.

swL2PortInfoEntry row .1.3.6.1.4.1.2272.1.201.1.2.4.1.1

A list of information for each port of the device.

Indexes

swL2PortInfoPortIndex

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.4.1.1.1
swL2PortInfoUnitIndex Indicates ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.4.1.1.2
swL2PortInfoType This object indicates the connector type of this port.	Enumeration Enumerated Values: 1 other 2 portType-100Base-TX 3 portType-100Base-FX 4 portType-100Base-FL 5 portType-1000Base-T 6 portType-1000Base-SX 7 portType-1000Base-LX 8 portType-1000Base-GBIC-SX 9 portType-1000Base-GBIC-LX 10 portType-1000Base-GBIC-CWDM 11 portType-1000Base-GBIC-XD 12 portType-1000Base-GBIC-ZX 13 portType-1000Base-GBIC-COPPER 14 portType-1000Base-GBIC-OTHER	.1.3.6.1.4.1.2272.1.201.1.2.4.1.1.3
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.2272.1.201.1.2.4.1.1.4
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 1 other 2 auto 3 half-10Mbps 4 full-10Mbps 5 half-100Mbps 6 full-100Mbps 7 half-1Gigabps 8 full-1Gigabps	.1.3.6.1.4.1.2272.1.201.1.2.4.1.1.5

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.4.2.1

A list of control information for each port of the device.

Indexes

swL2PortCtrlPortIndex

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.1
swL2PortCtrlUnitIndex Indicates ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.2
swL2PortCtrlAdminState This object decide the port enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.3
swL2PortCtrlNwayState Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 other 2 nway-enabled 3 nway-disabled-10Mbps-Half 4 nway-disabled-10Mbps-Full 5 nway-disabled-100Mbps-Half 6 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Full	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.4
swL2PortCtrlFlowCtrlState The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames a…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.5
swL2PortCtrlAddressLearningState This object decide the address learning state on this port is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.4.2.1.6

A table that contains information of utilization about every 
port.

swL2PortUtilEntry row .1.3.6.1.4.1.2272.1.201.1.2.4.3.1

A list of information of utilization for each port of the device.

Indexes

swL2PortUtilPortIndex

Column	Syntax	OID
swL2PortUtilPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.4.3.1.1
swL2PortUtilTxSec Indicates how many packets transmitted per second.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.201.1.2.4.3.1.2
swL2PortUtilRxSec Indicates how many packets received per second.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.201.1.2.4.3.1.3
swL2PortUtilUtilization This object indicates the port utilization.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.201.1.2.4.3.1.4

This table defines information for the device to filter packets
with specific MAC address (either as the DA and/or as the SA). 
The MAC address can be a unicast address or a multicast address. 
This table has higher priority than both static FDB table and 
IGMP table. It means that if a MAC address appears on this table 
also appears on the static FDB table, the device will use the
information provide by this table to process the packet.

swL2FilterAddrCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1

A list of information about a specific unicast/multicast MAC
address for which the switch has filtering information.

Indexes

swL2FilterAddrMacIndex

Column	Syntax	OID
swL2FilterAddrMacIndex This object indicates a unicast/multicast MAC address for which the switch has filtering information. But if the swL2FilterAddrState = src-addr then the object can not be a multicast MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.1
swL2FilterAddrState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-ad…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr 5 invalid	.1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2

A table containing static configuration information for each
VLAN configured into the device by (local or network) 
management.

swL2StaticVlanEntry row .1.3.6.1.4.1.2272.1.201.1.2.7.1.1

Static information for a VLAN configured into the device by
(local or network) management.

Indexes

swL2StaticVlanIndex

Column	Syntax	OID
swL2StaticVlanIndex A value that uniquely identifies the Virtual LAN associated with this entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.1
swL2StaticVlanName An administratively-assigned name for this VLAN.	RFC1213-MIBDisplayStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.2
swL2StaticVlanType The type of VLAN, distinguished according to the policy used to define its port membership.	Enumerationr/w Enumerated Values: 1 byport 2 byIpSubnet 3 byProtocolId	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.3
swL2StaticVlanProtocolId The protocol identifier of this VLAN. This value is meaningful only if swL2StaticVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).	Enumerationr/w Enumerated Values: 0 none 1 ipEther2 2 rarpEther2 3 ipx802dot3 4 ipx802dot2 5 ipxSnap 6 ipxEther2 7 apltkEther2Snap 8 decEther2 9 decOtherEther2 10 sna802dot2 11 snaEther2 12 netBios 13 xnsEther2 14 vinesEther2 15 ipv6Ether2 16 userDefined 17 arpEther2	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.4
swL2StaticVlanIpSubnetAddr The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.5
swL2StaticVlanIpSubnetMask The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.6
swL2StaticVlanUserDefinedPid When swL2StaticVlanProtocolId is set to userDefined(16) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier. Otherwise, this object should be zero.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.7
swL2StaticVlanEncap This value is meaningful only if swL2StaticVlanProtocolId is set to userDefined(16). Otherwise, this object should be un-used(5). If If this set to ethernet2(2), the Detagged Frame uses Type-encapsulated 802.3 format.…	Enumerationr/w Enumerated Values: 1 all 2 ethernet2 3 llc 4 snap 5 un-used	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.8
swL2StaticVlanUserPriority User priority level. This value is meaningful only if swL2StaticVlanType is set to byIpSubnet(2) or byProtocolId(3).	Integer32r/w Constraints: range: 0-0 range: 4-4 range: 6-7	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.9
swL2StaticVlanEgressPorts The set of ports which are permanently assigned to the egress list for this VLAN by management. The default value of this object is a string of zeros of appropriate length.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.10
swL2StaticVlanUntaggedPorts The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN is a string of appropriate length including all ports. There is no specified defau…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.11
swL2StaticVlanStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.12
swL2StaticVlanIpSubnetArpClassId This object indicates the ARP classification ID. If the swL2StaticVlanType is not byIpSubnet(2), this value must be 0. If the swL2StaticVlanType is byIpSubnet(2), the range of this object is 1 to 4094. This object is us…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.201.1.2.7.1.1.13

A table containing per port control and status information for
VLAN configuration in the device.

swL2VlanPortEntry row .1.3.6.1.4.1.2272.1.201.1.2.7.2.1

Information controlling VLAN configuration for a port
on the device.

Indexes

swL2VlanPortIndex

Column	Syntax	OID
swL2VlanPortIndex An unique index used to identify a particular port in the system.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.201.1.2.7.2.1.1
swL2VlanPortPvid The PVID, the VLAN ID assigned to untagged frames or Priority- Tagged frames received on this port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.201.1.2.7.2.1.2
swL2VlanPortIngressChecking When this is enabled(3) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When disabled(2), the port will accept all incoming frames.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.7.2.1.3

This table specifys which ports group a set of ports(up to 8)
into a single logical link.

swL2TrunkCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.8.3.1

A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.

Indexes

swL2TrunkIndex

Column	Syntax	OID
swL2TrunkIndex The index of logical port trunk. The trunk group number depend on the existence of unit and module.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.1
swL2TrunkName The name of logical port trunk.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.2
swL2TrunkMasterPort The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.3
swL2TrunkMember Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 4 for one trunks.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.4
swL2TrunkFloodingPort The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.5
swL2TrunkState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2)…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled 4 invalid	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.6
swL2TrunkBPDU8600InterState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2)…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.8.3.1.7

The table controls the Vlan's IGMP function. Its scale depends
on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled
mode, there is only one entry in the table, with index 1. If 
VLAN is in Port-Base or 802.1q mode, the number of entries can 
be up to 12, with index range from 1 to 12.

swL2IGMPCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.3.1

The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column	Syntax	OID
swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.1
swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this switch.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.2
swL2IGMPMaxResponseTime The maximum query response time on this switch.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.3
swL2IGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.4
swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.5
swL2IGMPHostTimeout The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please refere…	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.6
swL2IGMPRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.7
swL2IGMPLeaveTimer When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.8
swL2IGMPQueryState This object decide the IGMP query enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.9
swL2IGMPCurrentState This object indicates the current IGMP query state.	Enumeration Enumerated Values: 1 other 2 querier 3 non-querier	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.10
swL2IGMPCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.10.3.1.11

The table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.4.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.4.1.1
swL2IGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.4.1.2
swL2IGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.4.1.3

The table containing current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
that the priority of IGMP table entries is lower than Filtering
Table, i.e. if there is a table hash collision between the 
entries of IGMP Table and Filtering Table inside the switch H/W
address table, then Filtering Table entry overwrite the 
colliding entry of IGMP Table. See swL2FilterMgmt description 
also.

swL2IGMPGroupEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.5.1

Information about current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVid This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.5.1.1
swL2IGMPGroupIpAddr This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.10.5.1.2
swL2IGMPMacAddr This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.201.1.2.10.5.1.3
swL2IGMPPortMap This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered p…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.10.5.1.4
swL2IGMPIpGroupReportCount This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.5.1.5

The table containing current IGMP forwarding information which
captured by this device, provided that swL2DevCtrlIGMPSnooping 
and swL2IGMPCtrlState of associated VLAN entry are all enabled.
Note that the priority of IGMP table entries is lower than 
Filtering Table, i.e. if there is a table hash collision between
the entries of IGMP Table and Filtering Table inside the switch
H/W address table, then Filtering Table entry overwrite the 
colliding entry of IGMP Table. See swL2FilterMgmt description 
also.

swL2IGMPForwardEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.6.1

Information about current IGMP forwarding information which
captured by this device, provided that swL2DevCtrlIGMPSnooping
and swL2IGMPCtrlState of associated VLAN entry are all enabled.

Indexes

swL2IGMPForwardVid swL2IGMPForwardGroupIpAddr

Column	Syntax	OID
swL2IGMPForwardVid This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report forward information captured on network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.6.1.1
swL2IGMPForwardGroupIpAddr This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.10.6.1.2
swL2IGMPForwardPortMap This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered p…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.10.6.1.3

The table allows you to designate a range of ports as being 
connected to multicast-enabled routers. This will ensure that 
all packets with such a router as its destination will reach the
multicast-enabled router, regardless of protocol, etc.

swL2IGMPRPEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.7.1

A list of swL2IGMPRPTable.

Indexes

swL2IGMPRPVid

Column	Syntax	OID
swL2IGMPRPVid The Vid of the VLAN on which the router port resides.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.7.1.1
swL2IGMPRPStaticRouterPort Specifies a range of ports which will be configured as router ports.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.10.7.1.2
swL2IGMPRPDynamicRouterPort Displays router ports that have been dynamically configued.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.2272.1.201.1.2.10.7.1.3

This table describe the detail information of the member ports
of the swL2IGMPGroupTable.

swL2IGMPGroupPortEntry row .1.3.6.1.4.1.2272.1.201.1.2.10.9.1

Information about member ports of current swL2IGMPGroupTable.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr swL2IGMPPortMember

Column	Syntax	OID
swL2IGMPPortMember This object indicates which ports are belong to the same multicast group, in per-Vlan basis, in swL2IGMPGroupTable.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.10.9.1.1
swL2IGMPPortAgingTime This object indicate the aging out timer. This value is in units of seconds.	Integer32 Constraints: range: 1-16711450	.1.3.6.1.4.1.2272.1.201.1.2.10.9.1.2

This table specifys the storm traffic control configuration.

swL2TrafficCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.12.1.1

A list of information specifies the storm traffic control
configuration.

Indexes

swL2TrafficCtrlGroupIndex

Column	Syntax	OID
swL2TrafficCtrlGroupIndex The index of logical port trunk. The trunk group number depend on the existence of unit and module.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.1
swL2TrafficCtrlUnitIndex Indicates ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.2
swL2TrafficCtrlBMStormthreshold This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStormCtrl, swL2TrafficCtrlMcastStormCtrl or swL2TrafficCtrlDlfStormCtrl objects whether is enabled) will acti…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.3
swL2TrafficCtrlBcastStormCtrl This object indicates broadcast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.4
swL2TrafficCtrlMcastStormCtrl This object indicates multicast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.5
swL2TrafficCtrlDlfStormCtrl This object indicates destination lookup fail function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.12.1.1.6

The switch contains 4 hardware priority queues. Incoming packets
must be mapped to one of these four queues. Each hardware queue
will transmit all of the packets in its buffer before allowing
the next lower priority queue to transmit its packets. When the
lowest hardware priority queue has finished transmitting all of
its packets, the highest hardware priority queue can again
transmit any packets it may have received.

swL2QosSchedulingEntry row .1.3.6.1.4.1.2272.1.201.1.2.13.1.1

A list of information specifies the Qos output scheduling Table.

Indexes

swL2QosSchedulingClassId

Column	Syntax	OID
swL2QosSchedulingClassId This specifies which of the four hardware priority queues. The four hardware priority queues are identified by number, from 0 to 3, with the 0 queue being the lowest priority.	Integer32 Constraints: range: 0-3	.1.3.6.1.4.1.2272.1.201.1.2.13.1.1.1
swL2QosSchedulingMaxPkts Specifies the maximium number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.201.1.2.13.1.1.2
swL2QosSchedulingMaxLatency Specifies the maximum amount of time the above specified hardware priority queue will be allowed to transmit packets before allowing the next lowest hardware priority queue to begin transmitting its packets. A value be…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.201.1.2.13.1.1.3

This table display the current priority settings on the switch.

swL2QosPriorityEntry row .1.3.6.1.4.1.2272.1.201.1.2.13.2.1

A list of information display the current priority settings on
the switch.

Indexes

swL2QosPriorityType swL2QosPriorityValue

Column	Syntax	OID
swL2QosPriorityType These parameters define what characteristics an incoming packet must meet. One or more of the above parameters must be defined.	Enumeration Enumerated Values: 1 other 2 type-dscp 3 type-8021p 4 type-tcp 5 type-udp 6 type-ip 7 type-mac	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.1
swL2QosPriorityValue This object must match with swL2QosPriorityType. If the type is type-dscp(2), the range of this object is 0~63. If the type is type-8021p(3), the range of this object is 0~7. If the type is type-tcp(4) or type-udp(5), …	OctetString Constraints: range: 6-6 range: 4-4 range: 1-2	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.2
swL2QosPriorityPriority Allows to specify a priority value to be written to the 802.1p priority field of an incoming packet that meets the criteria.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.3
swL2QosPriorityPriorityState This object indicates 802.1p priority function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.4
swL2QosPriorityReplaceDscp Allows to specify a value to be written to the DSCP field of an incoming packet that meets the criteria.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.5
swL2QosPriorityReplaceDscpState This object indicates DSCP function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.6
swL2QosPriorityReplacePriority This object indicates the 802.1p user priority with the priority specified above will be replaced or not.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.7
swL2QosPriorityState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.2.13.2.1.8

This table specifys the storm traffic control configuration.

swL2StormCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.2.15.1.1

A list of information specifies the storm traffic control
configuration.

Indexes

swL2StormCtrlPortIndex

Column	Syntax	OID
swL2StormCtrlPortIndex The index of logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.15.1.1.1
swL2StormCtrlBcastStormCtrl This object indicates broadcast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.15.1.1.2
swL2StormCtrlMcastStormCtrl This object indicates multicast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.15.1.1.3
swL2StormCtrlBMStormThreshold This object to decide how much percentage packets per second broadcast/multicast (depend on swL2StormCtrlBcastStormCtrl or swL2StormCtrlMcastStormCtrl objects whether is enabled) will active storm control. Whenever a p…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.201.1.2.15.1.1.4

This table specifys the CPU rate limit per port. Once too much
broadcast/multicast traffic, exceed CP-Limit, comes in from a
port, the port state will be disabled.

swL2CpuRateLimitEntry row .1.3.6.1.4.1.2272.1.201.1.2.15.4.1

A list of information specifies the CPU rate limit of the port
configuration.

Indexes

swL2CpuRateLimitPortIndex

Column	Syntax	OID
swL2CpuRateLimitPortIndex The index of logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.15.4.1.1
swL2CpuRateLimitState This object indicates CPU rate limit function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.2.15.4.1.2
swL2CpuRateLimitBcastThreshold This object to decide how much packets per second broadcast will active traffic control. Whenever a port reaches its configured packets in the one second time interval, the port will be disabled.	Integer32r/w Constraints: range: 0-1700	.1.3.6.1.4.1.2272.1.201.1.2.15.4.1.3
swL2CpuRateLimitMcastThreshold This object to decide how much packets per second multicast will active traffic control. Whenever a port reaches its configured packets in the one second time interval, the port will be disabled.	Integer32r/w Constraints: range: 0-2000	.1.3.6.1.4.1.2272.1.201.1.2.15.4.1.4

This table specifys the template of flow classifier.

swL2ACLQosFlowClassifierEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.3.1

A list of information specifies the template of flow classifier.

Indexes

swL2ACLQosFlowClassifierTemplateId

Column	Syntax	OID
swL2ACLQosFlowClassifierTemplateId The index of template ID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.1
swL2ACLQosFlowClassifierCurrentMode The current operated mode of this template.	Enumeration Enumerated Values: 1 other 2 security 3 qos 4 l4-switch	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.2
swL2ACLQosFlowClassifierSecuritySrcMask This object indicates a source IP subnet rule for the switch. If the swL2ACLQosFlowClassifierCurrentMode is not security(2), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.3
swL2ACLQosFlowClassifierQosFlavor These parameters define what characteristics an incoming packet must meet. One or more of the above parameters must be defined. If the swL2ACLQosFlowClassifierCurrentMode is not qos(3), then this object must be flavor-u…	Enumerationr/w Enumerated Values: 1 flavor-8021p 2 flavor-dscp 3 flavor-ip 4 flavor-tcp 5 flavor-udp 6 flavor-un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.4
swL2ACLQosFlowClassifierL4SwitchTCPDstIp This object indicate the destination ipaddress in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.5
swL2ACLQosFlowClassifierL4SwitchTCPSrcIp This object indicate the source ipaddress in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.6
swL2ACLQosFlowClassifierL4SwitchTCPTos This object indicate the type of service in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.7
swL2ACLQosFlowClassifierL4SwitchTCPDstPort This object indicate the destination TCP port number in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-us…	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.8
swL2ACLQosFlowClassifierL4SwitchTCPSrcPort This object indicate the source TCP port number in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.9
swL2ACLQosFlowClassifierL4SwitchTCPFlags This object indicate the TCP flags in the configured L4 TCP- session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.10
swL2ACLQosFlowClassifierL4SwitchUDPDstIp This object indicate the destination ipaddress in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.11
swL2ACLQosFlowClassifierL4SwitchUDPSrcIp This object indicate the source ipaddress in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.12
swL2ACLQosFlowClassifierL4SwitchUDPTos This object indicate the type of service in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.13
swL2ACLQosFlowClassifierL4SwitchUDPDstPort This object indicate the destination UDP port number in the configured L4 UDP session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-us…	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.14
swL2ACLQosFlowClassifierL4SwitchUDPSrcPort This object indicate the source UDP port number in the configured L4 UDP session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.15
swL2ACLQosFlowClassifierL4SwitchOtherDstIp This object indicate the destination ipaddress in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.16
swL2ACLQosFlowClassifierL4SwitchOtherSrcIp This object indicate the source ipaddress in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.17
swL2ACLQosFlowClassifierL4SwitchOtherTos This object indicate the type of service in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.18
swL2ACLQosFlowClassifierL4SwitchOtherL4Protocol This object indicate the l4_protocol in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.19
swL2ACLQosFlowClassifierL4SwitchOtherICMPMessage This object indicate the ICMP message in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.20
swL2ACLQosFlowClassifierL4SwitchOtherIGMPType This object indicate the IGMP type in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 true 2 false 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.21
swL2ACLQosFlowClassifierActiveRuleNumber This object indicates the number of active rule.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.22
swL2ACLQosFlowClassifierSecurityDstMask This object indicates a destination IP subnet rule for the switch. If the swL2ACLQosFlowClassifierCurrentMode is not security(2), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.3.1.23

This table specifys which vlan has been binded in the template.

swL2ACLQosFlowClassifierVlanEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.4.1

A list of information which vlan has been binded in the template.

Indexes

swL2ACLQosFlowClassifierVlanTemplateId swL2ACLQosFlowClassifierVlanVlanName

Column	Syntax	OID
swL2ACLQosFlowClassifierVlanTemplateId The index of template ID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.4.1.1
swL2ACLQosFlowClassifierVlanVlanName The existence of VLAN name.	RFC1213-MIBDisplayString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.201.1.2.16.4.1.2
swL2ACLQosFlowClassifierVlanState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. attached…	Enumerationr/w Enumerated Values: 1 other 2 attached 3 detached	.1.3.6.1.4.1.2272.1.201.1.2.16.4.1.3

This table specifys the template-depend rules.

swL2ACLQosTemplateRuleEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.5.1

A list of information specifies the template-depend rules.

Indexes

swL2ACLQosTemplateRuleTemplateId swL2ACLQosTemplateRuleIndex

Column	Syntax	OID
swL2ACLQosTemplateRuleTemplateId The index of template ID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.1
swL2ACLQosTemplateRuleIndex The index of template rule.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.2
swL2ACLQosTemplateRuleMode This object indicates the rule type of the entry.	Enumeration Enumerated Values: 1 other 2 security 3 qos 4 l4-switch	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.3
swL2ACLQosTemplateRuleSecuritySrcIp This object indicates the source IP of flow template. If the swL2ACLQosTemplateRuleMode is not security(2), then this object will be display 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.4
swL2ACLQosTemplateRuleQosFlavor This object indicates the rule type of the QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be flavor-un-used(6).	Enumeration Enumerated Values: 1 flavor-8021p 2 flavor-dscp 3 flavor-ip 4 flavor-tcp 5 flavor-udp 6 flavor-un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.5
swL2ACLQosTemplateRuleQosValue This object must match with swL2ACLQosTemplateRuleQosFlavor. If the type is flavor-8021p(1), the range of this object is 0~7. If the type is flavor-dscp(2), the range of this object is 0~63. If the type is flavor-tcp(4)…	OctetStringr/w Constraints: range: 0-2 range: 4-4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.6
swL2ACLQosTemplateRuleQosPriority This object indicates the priority of ingress packets in QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.7
swL2ACLQosTemplateRuleQosDscp This object indicates the Dscp of ingress packets in QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be 0.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.8
swL2ACLQosTemplateRuleL4SwitchSessionType This object indicates the rule type of the TCP-Session in L4-Switch mode. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(4).	Enumerationr/w Enumerated Values: 1 tcp 2 udp 3 other 4 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.9
swL2ACLQosTemplateRuleL4SwitchSessionTCPDstIp This object indicates the destination ipaddress in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.10
swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcIp This object indicates the source ipaddress in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.11
swL2ACLQosTemplateRuleL4SwitchSessionTCPTos This object indicates the type of service in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.12
swL2ACLQosTemplateRuleL4SwitchSessionTCPDstPort This object indicates the destination TCP port number in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.13
swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcPort This object indicates the source TCP port number in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.14
swL2ACLQosTemplateRuleL4SwitchSessionTCPFlagsdeprecated This object indicates the TCP flags in the configured L4 TCP- session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(7). This object is deprecated be…	Enumerationr/w Enumerated Values: 1 fin 2 syn 3 rst 4 psh 5 ack 6 urg 7 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.15
swL2ACLQosTemplateRuleL4SwitchSessionUDPDstIp This object indicates the destination ipaddress in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.16
swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcIp This object indicates the soruce ipaddress in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.17
swL2ACLQosTemplateRuleL4SwitchSessionUDPTos This object indicates the type of service in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.18
swL2ACLQosTemplateRuleL4SwitchSessionUDPDstPort This object indicates the destination UDP port number in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.19
swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcPort This object indicates the source UDP port number in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.20
swL2ACLQosTemplateRuleL4SwitchSessionOtherDstIp This object indicates the destination ipaddress in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.21
swL2ACLQosTemplateRuleL4SwitchSessionOtherSrcIp This object indicates the source ipaddress in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.22
swL2ACLQosTemplateRuleL4SwitchSessionOtherTos This object indicates the type of service in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.23
swL2ACLQosTemplateRuleL4SwitchSessionOtherL4Protocol This object indicates the l4_protocol in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(3).	Enumerationr/w Enumerated Values: 1 icmp 2 igmp 3 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.24
swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPType This object indicates the type of ICMP message in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.25
swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPCode This object indicates the code of ICMP message in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	OctetStringr/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.26
swL2ACLQosTemplateRuleL4SwitchSessionOtherIGMPType This object indicates the IGMP type in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(5). If the object be set to response-version-…	Enumerationr/w Enumerated Values: 1 query 2 response-version-1 3 response-version-2 4 response-version-all 5 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.27
swL2ACLQosTemplateRuleL4SwitchActionType This object indicates the action when a packet matches an entry of l4_switch mode. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(4).	Enumerationr/w Enumerated Values: 1 drop 2 forward 3 redirect 4 un-used	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.28
swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState This object decide to sending the packet to one of 8 hardware priority queues or not.	Enumerationr/w Enumerated Values: 1 other 2 true 3 false	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.29
swL2ACLQosTemplateRuleL4SwitchActionForwardPriority This object indicates the priority related to one of 8 hardware priority queues. If the swL2ACLQosTemplateRuleMode is not l4-switch(4) or the swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState is not true(2), th…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.30
swL2ACLQosTemplateRuleL4SwitchActionForwardDscp If the swL2ACLQosTemplateRuleMode is not l4-switch(4) or the swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState is not true(2),, this object must be 0.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.31
swL2ACLQosTemplateRuleL4SwitchActionRedirectIp This object indicates the redirected IP address that when a packet matches an entry of l4_switch mode. If the swL2ACLQosTemplateRuleL4SwitchActionType is not redirect(3), this object must be 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.32
swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable This object indicates the action of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. false(2)…	Enumerationr/w Enumerated Values: 1 other 2 true 3 false	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33
swL2ACLQosTemplateRuleState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.34
swL2ACLQosTemplateRuleL4SwitchSessionTCPFlagsAll This object indicates the TCP flags in the configured L4 TCP- session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero.	Bitsr/w Enumerated Values: 0 fin 1 syn 2 rst 3 psh 4 ack 5 urg	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.35
swL2ACLQosTemplateRuleSecurityDstIp This object indicates the destination IP of flow template. If the swL2ACLQosTemplateRuleMode is not security(2), then this object will be display 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.5.1.36

This table defines information for the device to filter packets
with specific Destination IP address. The IP address can be a 
unicast address or multicast address. This table has higher 
priority than both static FDB table and IGMP table. It means 
that if a IP address appears on this table also appears on the 
static FDB table, the device will use the information provide by
this table to process the packet.

swL2ACLQosDestinationIpFilterEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.6.1

A list of information about a specific unicast/multicast IP
address for which the switch has filtering information.

Indexes

swL2ACLQosDestinationIpFilterIpAddr

Column	Syntax	OID
swL2ACLQosDestinationIpFilterIndexobsolete The index of this rule.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.6.1.1
swL2ACLQosDestinationIpFilterIpAddr This object indicates a unicast IP address for which the switch has filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.2.16.6.1.2
swL2ACLQosDestinationIpFilterState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.2.16.6.1.3

This table defines information for the device to filter packets
with specific MAC address (either as the DA and/or as the SA). 
The MAC address can be a unicast address or a multicast address.
This table has higher priority than both static FDB table and 
IGMP table. It means that if a MAC address appears on this table
also appears on the static FDB table, the device will use the 
information provide by this table to process the packet.

swL2ACLQosFDBFilterEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.7.1

A list of information about a specific unicast/multicast MAC
address for which the switch has filtering information.

Indexes

swL2ACLQosFDBFilterVlanName swL2ACLQosFDBFilterMacAddress

Column	Syntax	OID
swL2ACLQosFDBFilterIndexobsolete The index of this rule.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.7.1.1
swL2ACLQosFDBFilterVlanName The existence of VALN name.	RFC1213-MIBDisplayString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.201.1.2.16.7.1.2
swL2ACLQosFDBFilterMacAddress This object will filter on destination MAC address operates on bridged packets, but not on routed packets. And It will filter on source MAC operates on all packets.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.201.1.2.16.7.1.3
swL2ACLQosFDBFilterState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.2.16.7.1.4

The switch contains 4 hardware priority queues. Incoming packets
must be mapped to one of these four queues. Each hardware queue
will transmit all of the packets in its buffer before allowing
the next lower priority queue to transmit its packets. When the
lowest hardware priority queue has finished transmitting all of
its packets, the highest hardware priority queue can again
transmit any packets it may have received.

swL2ACLQosSchedulingEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.9.1

A list of information specifies the Qos output scheduling Table.

Indexes

swL2ACLQosSchedulingPortIndex swL2ACLQosSchedulingClassId

Column	Syntax	OID
swL2ACLQosSchedulingPortIndex The index of logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.9.1.1
swL2ACLQosSchedulingClassId This specifies which of the four hardware priority queues. The four hardware priority queues are identified by number, from 0 to 3, with the 0 queue being the lowest priority.	Integer32 Constraints: range: 0-3	.1.3.6.1.4.1.2272.1.201.1.2.16.9.1.2
swL2ACLQosSchedulingWRRValue Specifies the weighted round robin (WRR) the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.201.1.2.16.9.1.3

This table indicates the destination mac priority in flow 
classifier.

swL2ACLQosMacPriorityEntry row .1.3.6.1.4.1.2272.1.201.1.2.16.10.1

A list of information specifies the destination mac priority in
flow classifier.

Indexes

swL2ACLQosMacPriorityVlanName swL2ACLQosMacPriorityDstMacAddress

Column	Syntax	OID
swL2ACLQosMacPriorityIndexobsolete The index of this rule.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.2.16.10.1.1
swL2ACLQosMacPriorityVlanName The existence VLAN name.	RFC1213-MIBDisplayString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.201.1.2.16.10.1.2
swL2ACLQosMacPriorityDstMacAddress This object will filter on destination MAC address operates on bridged packets, but not on routed packets. And It will filter on source MAC operates on all packets.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.201.1.2.16.10.1.3
swL2ACLQosMacPriorityPriorityValue This object indicates the priority related to one of 8 hardware priority queues.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.201.1.2.16.10.1.4
swL2ACLQosMacPriorityState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.2.16.10.1.5