rcPortAdminStatus
SWITCH-SYSTEM-MIB ·
.1.3.6.1.4.1.8886.6.1.1.4.1.1.5
Object
column
r/w
Enumeration
The desired state of the interface.
Context
- MIB
- SWITCH-SYSTEM-MIB
- OID
.1.3.6.1.4.1.8886.6.1.1.4.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcPortEntry
- Table
- rcPortTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPortIndex An index based 1 that uniquely identifies a system interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.1 |
| rcPortMacLearningEnable Set the learning ability on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.10 |
| rcPortMacThreshold The Mac limit number on the interface or interface-vlan. | column | Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.11 |
| rcPortStormControlBcastEnable Set the broadcast storm control on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.12 |
| rcPortStormControlMcastEnable Set the multicast storm control on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.13 |
| rcPortStormControlDlfEnable Set the DLF storm control on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.14 |
| rcPortStormControlBurst Set burst length when storm control open on the interface. . | column | kB Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.15 |
| rcPortStormControlLimit The limit number for storm control on this port . | column | pps Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.16 |
| rcPortStormControlLimitRatio storm control limit ratio on this port | column | percent Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.17 |
| rcPortDefaultPriority The received untaged frames are forwarded to a proper queue according to
this default priority. | column | Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.18 |
| rcPortLoopbackDetectEnable Loopback detect of this port is on or off. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.19 |
| rcPortType port type,same as slot type. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.2 |
| rcPortLoopbackDetectSrcPort The source port(it sends loopback-detect packets) makes of loop with
loopback port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.20 |
| rcPortProtected Traffic between protected port group members are blocked. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.21 |
| rcPortFlowControlRecvEnable Set the flow control on receive direction of the interface
to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.22 |
| rcPortFlowControlSendEnable Set the flow control on sender direction of the interface
to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.23 |
| rcPortFlowControlRecvStatus The flow control status on receive direction of the interface
to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.24 |
| rcPortFlowControlSendStatus The flow control status on sender direction of the interface
to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.25 |
| rcPortLoopbackDetectDownTime time of loopback port shutdown. | column | Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.26 |
| rcPortMediaAttachType media attachment type of this Ether like interface. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.27 |
| rcPortMediaAttachCapability Medium type and capability of media attachment units. It is different with
rcPortType which identifys the capability of the Ether like interface. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.28 |
| rcPortMDIXMode Automatic MDI Crossover mode of a port/PHY | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.29 |
| rcSlotTableIndex the index of slot which this port is in. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.3 |
| rcPortMDIXStatus Automatic MDI Crossover mode of a port/PHY | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.30 |
| rcportDiscPKts The number of packets which were the difference between
the total number of packets received on the interface and
all packets transmitted out of the interface | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.31 |
| rcPortMacThresholdVlan when the Mac limits mac-thredshold on the interface-vlan,
it indicates the VlanId;when the mac limits mac-thredshold on interface,
its value is 4095. | column | Integer32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.32 |
| rcSlotPortIndex index of this port in the slot | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.4.1.1.4 |
| rcPortOperStatus The current operational state of the interface. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.6 |
| rcPortDuplexSpeedSet The desired speed and duplex for this interface. If the selected
control is not possible on the interface, a value of illegal(99)
is returned. If the port type does NOT support t… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.7 |
| rcPortDuplexSpeedGet The actual speed and duplex for this interface. If the
interface is not configured for an acceptable value, a value of
illegal(99) is returned. A value of unknown(1) is returned… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.4.1.1.8 |
| rcPortFlowControlEnable Set the flow control on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.4.1.1.9 |