SWITCH-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
42

rcSlotStateTable

table
.1.3.6.1.4.1.8886.6.1.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlotStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-SYSTEM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-SYSTEM-MIB::rcSlotStateTable' 
A table of slot .
rcSlotStateEntry row .1.3.6.1.4.1.8886.6.1.1.2.2.1
A list of slot.
Indexes
Column Syntax OID
rcSlotIndex
slot index based 0
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.2.2.1.1
rcSlotPortStart
the start number of port in this slot
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.2.2.1.2
rcSlotPortNum
the number of ports in this slot
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.2.2.1.3
rcSlotType
slot type
Enumeration
Enumerated Values:
0inexistence
1fx-DulMode-1000M
2tx-1000M
3fx-SigMode-1000M
4fx-DulMode-100M
5fx-SigMode-100M
6tx-100M
7px-1000M
 .1.3.6.1.4.1.8886.6.1.1.2.2.1.4

rcPortTable

table
.1.3.6.1.4.1.8886.6.1.1.4.1 · 1 row entry · 32 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-SYSTEM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-SYSTEM-MIB::rcPortTable' 
A table of switch port and associated properties.
rcPortEntry row .1.3.6.1.4.1.8886.6.1.1.4.1.1
Table entry for switch port control and status information.
Indexes
Column Syntax OID
rcPortIndex
An index based 1 that uniquely identifies a system interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.1
rcPortType
port type,same as slot type.
Enumeration
Enumerated Values:
0inexistence
1fx-DulMode-1000M
2tx-1000M
3fx-SigMode-1000M
4fx-DulMode-100M
5fx-SigMode-100M
6tx-100M
7px-1000M
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.2
rcSlotTableIndex
the index of slot which this port is in.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.3
rcSlotPortIndex
index of this port in the slot
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.4
rcPortAdminStatus
The desired state of the interface.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.5
rcPortOperStatus
The current operational state of the interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.6
rcPortDuplexSpeedSet
The desired speed and duplex for this interface. If the selected
control is not possible on the interface, a value of illegal(99)
is returned. If the port type does NOT support the default
of autonegotiate(1), then the…
Enumerationr/w
Enumerated Values:
1autonegotiate
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.7
rcPortDuplexSpeedGet
The actual speed and duplex for this interface. If the
interface is not configured for an acceptable value, a value of
illegal(99) is returned. A value of unknown(1) is returned when
the 'rcPortLink' indicates down(2)…
Enumeration
Enumerated Values:
1unknown
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
99illegal
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.8
rcPortFlowControlEnable
Set the flow control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.9
rcPortMacLearningEnable
Set the learning ability on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.10
rcPortMacThreshold
The Mac limit number on the interface or interface-vlan.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.11
rcPortStormControlBcastEnable
Set the broadcast storm control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.12
rcPortStormControlMcastEnable
Set the multicast storm control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.13
rcPortStormControlDlfEnable
Set the DLF storm control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.14
rcPortStormControlBurst
Set burst length when storm control open on the interface. .
kBInteger32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.15
rcPortStormControlLimit
The limit number for storm control on this port .
ppsInteger32r/w
Constraints:
range: 0-2621430
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.16
rcPortStormControlLimitRatio
storm control limit ratio on this port
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.17
rcPortDefaultPriority
The received untaged frames are forwarded to a proper queue according to
this default priority.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.18
rcPortLoopbackDetectEnable
Loopback detect of this port is on or off.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.19
rcPortLoopbackDetectSrcPort
The source port(it sends loopback-detect packets) makes of loop with
loopback port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.20
rcPortProtected
Traffic between protected port group members are blocked.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.21
rcPortFlowControlRecvEnable
Set the flow control on receive direction of the interface
to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.22
rcPortFlowControlSendEnable
Set the flow control on sender direction of the interface
to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.23
rcPortFlowControlRecvStatus
The flow control status on receive direction of the interface
to enable(1) or disable(2).
SWITCH-TCEnableVar
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.24
rcPortFlowControlSendStatus
The flow control status on sender direction of the interface
to enable(1) or disable(2).
SWITCH-TCEnableVar
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.25
rcPortLoopbackDetectDownTime
time of loopback port shutdown.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.26
rcPortMediaAttachType
media attachment type of this Ether like interface.
Enumeration
Enumerated Values:
1copper
2fiber
3card
4sfp
5combo-sfp
6combo-copper
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.27
rcPortMediaAttachCapability
Medium type and capability of media attachment units. It is different with
rcPortType which identifys the capability of the Ether like interface.
Enumeration
Enumerated Values:
0inexistence
1copper-1000M
2copper-100M
3fiber-1000M
4fiber-100M
5unlimited
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.28
rcPortMDIXMode
Automatic MDI Crossover mode of a port/PHY
Enumerationr/w
Enumerated Values:
1normal
2xover
3auto
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.29
rcPortMDIXStatus
Automatic MDI Crossover mode of a port/PHY
Enumerationr/w
Enumerated Values:
1normal
2xover
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.30
rcportDiscPKts
The number of packets which were the difference between
the total number of packets received on the interface and
all packets transmitted out of the interface
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.31
rcPortMacThresholdVlan
when the Mac limits mac-thredshold on the interface-vlan,
it indicates the VlanId;when the mac limits mac-thredshold on interface,
its value is 4095.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.8886.6.1.1.4.1.1.32

rcComboPortTable

table
.1.3.6.1.4.1.8886.6.1.1.4.2 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcComboPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-SYSTEM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-SYSTEM-MIB::rcComboPortTable' 
A table of Combo port and associated properties.
rcComboPortEntry row .1.3.6.1.4.1.8886.6.1.1.4.2.1
Table entry for Combo port status information.
Indexes
Column Syntax OID
rcComboIndex
An index based 1 that uniquely identifies a Ether like interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.1
rcComboPortIndex
An index for media attachment on Combo that 'rcComboIndex' uniquely identifies
a Ether like interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.2
rcComboPortType
port type identfies capability of Ether like interface.
Enumeration
Enumerated Values:
0inexistence
1fx-DulMode-1000M
2tx-1000M
3fx-SigMode-1000M
4fx-DulMode-100M
5fx-SigMode-100M
6tx-100M
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.3
rcComboPortMediaAttachType
media attachment type of Combo port.
Enumeration
Enumerated Values:
1sfp
2copper
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.4
rcComboPortActiveStatus
used to identify whether this Combo port currently be in the active state.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.5
rcComboPortMediaAttachCapability
Medium type and capability of media attachment units. It is different with
rcComboPortType which identifys the capability of the Ether like interface
Enumeration
Enumerated Values:
0inexistence
1copper-1000M
2copper-100M
3fiber-1000M
4fiber-100M
 .1.3.6.1.4.1.8886.6.1.1.4.2.1.6