rcIpRouting
SWITCH-SYSTEM-MIB ·
.1.3.6.1.4.1.8886.6.1.1.3.23
Object
scalar
r/w
Enumeration
start or stop system routing function . this is a commnd MIB variable .
Context
- MIB
- SWITCH-SYSTEM-MIB
- OID
.1.3.6.1.4.1.8886.6.1.1.3.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcSwitchConfig
- Siblings
- 38
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | startIpRouting |
2 | stopIpRouting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMacAgingTime The value based 10 is the aging time for MAC address.
Aging will be disable when aging time was (0) | scalar | second Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.1 |
| rcSvlEnable share vlan mode enable or disable | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.10 |
| rcGarpEnable GARP enable or disable | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.11 |
| rcLacpEnable share vlan mode enable or disable | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.12 |
| rcVlanSpaceNum obsolete The system supports at most rcVlanSpaceSize vlans,
so the vlan ID increases at rcVlanSpaceSize step over. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.13 |
| rcPvidSpaceNum obsolete The system supports at most rcPvidSpaceSize vlans,
so the vlan ID increases at rcPvidSpaceSize step over. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.14 |
| rcLoopbackDetectInterval Interval of sending loopback-detect packet. | scalar | second Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.15 |
| rcArpAgingTime deprecated arp timeout | scalar | second Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.16 |
| rcBpduTransPorts The ports translating BPDU packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.17 |
| rcDot1xTransPorts The ports translating Dot1x packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.18 |
| rcLacpTransPorts The ports translating Lacp packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.19 |
| rcStormControlBcastEnable Set the Storm control for broadcast on the interface to enable(1) or disable(2). | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.2 |
| rcGarpTransPorts The ports translating Garp packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.20 |
| rcGmrpTransPorts The ports translating Gmrp packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.21 |
| rcGvrpTransPorts The ports translating Gvrp packets. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.22 |
| rcStaticRouteDistance system static route distance value .
this is a commnd MIB variable . | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.24 |
| rcFastRoute true for fast route and false for normal route . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.1.3.25 |
| rcDlfForwardingEnable whether forwarding DLF packets . | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.26 |
| rcLoopbackDetectVlan loopback-detection packet belongs to which VLAN. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.27 |
| rcLoopbackDetectDestAddr destination MAC address of loopback-detection packet. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8886.6.1.1.3.28 |
| rcMaxAllowedFrameLength the maximum packet size for the switch. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.29 |
| rcStormControlMcastEnable Set the Storm control for multicast on the interface to enable(1) or disable(2). | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.3 |
| rcSvlDefaultVlan default vlan which the mac address is also learned to. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.30 |
| rcTelnetMaxSessions Max sessions device telnet server permits. '0' indicates that
device won't permits any telnet connect. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.31 |
| rcTelnetAcceptPorts Ports that access telnet connect request to telnet server
on device. | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.6.1.1.3.32 |
| rcVlanMacLearning Enable or disable source MAC address learning on VLAN. | scalar | SWITCH-TCVlanset | .1.3.6.1.4.1.8886.6.1.1.3.33 |
| rcConsoleEnable Enable or disable console connect. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.34 |
| rcMacTrapEnable Enable or disable mac-move trap. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.35 |
| rcMacMoveEnable Enable or disable mac-move. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.36 |
| rcMacMoveLastPortIndex This object is used as a variable to contain the value of the port-index
which caused the mac-move. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.3.37 |
| rcMacMoveLastMacaddress This object is used as a variable to contain the value of the MAC address
which caused the mac-move. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8886.6.1.1.3.38 |
| rcMacMoveLastVlan This object is used as a variable in the mac-move notification
to contain the value of the VLAN received the mac address which caused the mac-move. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.39 |
| rcStormControlDlfEnable Set the Storm control for DLF on the interface to enable(1) or disable(2). | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.4 |
| rcStormControlpps The limit number for storm control on the interface . | scalar | pps Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.5 |
| rcStormControlbps The limit number for storm control on the interface . | scalar | bps Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.6 |
| rcStormControlRatio storm control limit ratio | scalar | percent Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.7 |
| rcStormControlBurst Set burst length when storm control open on the interface. . | scalar | kB Integer32 | .1.3.6.1.4.1.8886.6.1.1.3.8 |
| rcStpEnable The enabled/disabled status of STP for the bridge entity. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.3.9 |